Index of
port-macppc
for February, 2003
From
Subject
02/01/2003
John Klos
Re: Anyone using an PCI IDE card?
Daniel Lamblin
Re: ACARD,6260 (Sonnet Tempo Ultra 66) Boot command?
02/03/2003
Xavier HUMBERT
Re: ACARD,6260 (Sonnet Tempo Ultra 66) Boot command?
John Klos
dnet clients for NetBSD-ppc
Daniel Lamblin
Re: ACARD,6260 (Sonnet Tempo Ultra 66) Boot command?
02/04/2003
Xavier HUMBERT
Re: ACARD,6260 (Sonnet Tempo Ultra 66) Boot command?
02/05/2003
Christopher Tribo
Re: OFW video cards was:ACARD,6260 (Sonnet Tempo Ultra 66)
02/08/2003
Mike Murphree
Trouble installing on PC PowerBase...
02/09/2003
Matthias Kretschmer
Autobooting, yaboot?
Erik Osheim
Re: Autobooting, yaboot?
02/10/2003
Russell McManus
mac <-> pc serial cable for OFW serial console?
Daniel Eggert
Re: mac <-> pc serial cable for OFW serial console?
Russell Hyer
PowerBook 1400
Charles Fultz
Re: PowerBook 1400
Daniel Lamblin
mc0: underflow
02/11/2003
Daniel Eggert
Re: mc0: underflow
brandyvmenon@lycos.c
Attn: Norton Systemworks 2003 Blowout!
Justin Hawkins
Boot problem on PowerBook G3
Daniel Eggert
Re: Boot problem on PowerBook G3
nick.f@marchcom.co.u
Booting from an Adaptec 2930 with Old World Mac
Russell McManus
Re: mc0: underflow
Christopher Tribo
Re: Boot problem on PowerBook G3
Emmanuel Dreyfus
boot crash with GENERIC
Emmanuel Dreyfus
Re: boot crash with GENERIC
Erik Osheim
Re: mc0: underflow
Erik Osheim
ifconfig question
Michael G. Schabert
Re: ifconfig question
Monroe Williams
Question about wskbd/wsmouse config in netbsd-macppc
02/12/2003
David Johnston
Re: mc0: underflow
Luke Mewburn
Re: Question about wskbd/wsmouse config in netbsd-macppc
Markus W Kilbinger
Re: ifconfig question
Monroe Williams
Re: Question about wskbd/wsmouse config in netbsd-macppc
Monroe Williams
Re: boot crash with GENERIC
Monroe Williams
Anybody else booting from Sonnet ATA-100 or ATA-133 card?
Ben Harris
Re: mc0: underflow
Matt Thomas
Re: boot crash with GENERIC
Matt Thomas
Re: Anybody else booting from Sonnet ATA-100 or ATA-133 card?
Monroe Williams
Re: boot crash with GENERIC
Emmanuel Dreyfus
Re: boot crash with GENERIC
Henry B. Hotz
Re: boot crash with GENERIC
02/13/2003
Inseo Park
I can't get mailing list.
Daniel Lamblin
Re: mc0: underflow
Monroe Williams
Re: Anybody else booting from Sonnet ATA-100 or ATA-133 card?
Daniel Eggert
Re: mc0: underflow
Ben Harris
Re: mc0: underflow
Daniel Eggert
Re: mc0: underflow
Emmanuel Dreyfus
Re: boot crash with GENERIC
Matt Thomas
Re: boot crash with GENERIC
Monroe Williams
Re: boot crash with GENERIC
Monroe Williams
For your edification...
Cliff Neighbors
RE: For your edification...
Monroe Williams
Re: For your edification...
Bill Studenmund
Re: For your edification...
Monroe Williams
Re: For your edification...
Michael Wolfson
1.6.1_RC1 floppies
02/14/2003
Jason R Thorpe
Re: For your edification...
Don Lee
Re: For your edification...
Nathan J. Williams
Re: Question about wskbd/wsmouse config in netbsd-macppc
Monroe Williams
Re: For your edification...
cliff neighbors
lwarx/stwcx [Re: For your edification...]
02/15/2003
Izumi Tsutsui
Re: Question about wskbd/wsmouse config in netbsd-macppc
Izumi Tsutsui
Re: Question about wskbd/wsmouse config in netbsd-macppc
Lennart Augustsson
Re: Question about wskbd/wsmouse config in netbsd-macppc
Monroe Williams
Re: lwarx/stwcx [Re: For your edification...]
Bill Studenmund
Re: For your edification...
Dario Billo
installation boot process
02/17/2003
Allen Briggs
Changes for review
Manuel Bouyer
Re: I can't get mailing list.
=?iso-8859-1?q?Zagreb=20
problem!
Dario Billo
installation boot
Dario Billo
boot on PowerBook G4 15"
02/18/2003
Christopher Tribo
Re: problem!
Soren S. Jorvang
X on 867/(1000) Mhz TiBook
Louis Guillaume
PowerBase Problems
Christopher Tribo
SCSI ZIP 100 on mesh() vs macppc
Christopher Tribo
Re: PowerBase Problems
Louis Guillaume
Re: PowerBase Problems
David Young
modem audio on G4s?
Christopher Tribo
Re: modem audio on G4s?
Christopher Tribo
UMAX C500/C600 603ev -> G3 upgrade?
John Klos
Re: UMAX C500/C600 603ev -> G3 upgrade?
Henry B. Hotz
Re: PowerBase Problems
Monroe Williams
Re: UMAX C500/C600 603ev -> G3 upgrade?
Mike Murphree
Re: PowerBase Problems
02/19/2003
Christopher Tribo
UMAX C500 weirdness
Yoshiyuki Haraoka
kernel make problem
Daniel Eggert
Re: modem audio on G4s?
Ian Fry
Re: X on 867/(1000) Mhz TiBook
Izumi Tsutsui
Re: UMAX C500 weirdness
Andrew Cagney
Mac harddisk upgrades
Daniel Eggert
Re: Mac harddisk upgrades
Peter Hessler
Re: Mac harddisk upgrades
Nathan J. Williams
Re: Mac harddisk upgrades
Dave Bate
Unable to Install onto a PowerCenter 132 - I/O error reading block zero
Dave Bate
Re: Unable to Install onto a PowerCenter 132 - I/O error reading block
John Klos
Re: Unable to Install onto a PowerCenter 132 - I/O error reading
Duncan Missimer
PB3400c & OFW secret sauce
02/20/2003
Antonio Gonzalez Castro
sysinst: can not find any hard disks
M L Riechers
PB3400c & OFW secret sauce
02/22/2003
M L Riechers
I want to rid ugly float load/stores used only for data movement
David Edelsohn
Re: I want to rid ugly float load/stores used only for data movement
M L Riechers
Re: I want to rid ugly float load/stores used only for data movement
Jesse Peterson
auto-rebooting
Jason R Thorpe
Re: I want to rid ugly float load/stores used only for data movement
Adam Russell
post-install on bronze powerbook
M L Riechers Mlr
Re: I want to rid ugly float load/stores used only for data movement
Matt Thomas
Re: I want to rid ugly float load/stores used only for data
Matt Thomas
Re: Sonnet G4 upgrade
02/23/2003
John Klos
Sonnet G4 upgrade
Daniel Eggert
Re: Sonnet G4 upgrade
Marton Fabo
OT: power supply for an ANS500
Russell McManus
Re: mac <-> pc serial cable for OFW serial console?
Daniel Eggert
Re: mac <-> pc serial cable for OFW serial console?
M L Riechers
Re: I want to rid ugly float load/stores used only for data movement
Matt Thomas
Re: I want to rid ugly float load/stores used only for data
02/24/2003
Antonio Gonzalez Castro
Problem installing NetNSD in a PowerMac G4 MDD...
Richard Earnshaw
Re: I want to rid ugly float load/stores used only for data
Christopher Tribo
Re: Problem installing NetNSD in a PowerMac G4 MDD...
John Livesey
boot floppy
Ciarcinski, Adam (ISS Br
RE: boot floppy
Christopher Tribo
RE: boot floppy
S. Schwerzmann
Re: mac <-> pc serial cable for OFW serial console?
Don Lee
Re: mac <-> pc serial cable for OFW serial console?
John Klos
No cpu node?
Monroe Williams
Re: No cpu node?
Andrew Cagney
Re: Mac harddisk upgrades
Andrew Cagney
Re: Question about wskbd/wsmouse config in netbsd-macppc
02/25/2003
John Klos
Booting a -current kernel?
John Klos
L2 and L3 caches on 7455 CPU card
Monroe Williams
Re: L2 and L3 caches on 7455 CPU card
Russell McManus
Re: mac <-> pc serial cable for OFW serial console?
Donald Lee
Re: mac <-> pc serial cable for OFW serial console?
M L Riechers
Re: I want to rid ugly float load/stores used only for data movement
David Edelsohn
Re: I want to rid ugly float load/stores used only for data movement
Monroe Williams
Re: L2 and L3 caches on 7455 CPU card
02/26/2003
Makoto Fujiwara
Re: boot floppy
John Klos
Re: L2 and L3 caches on 7455 CPU card
Daniel Eggert
Re: mac <-> pc serial cable for OFW serial console?
John Klos
7450 / 7455 L3 cache code
02/27/2003
Monroe Williams
Re: 7450 / 7455 L3 cache code
Andrew Cagney
luck with 1.6 and blackdown java?
02/28/2003
Peter Wolkerstorfer
beige g3 power-mac install problems
Ian Fry
bus_space_vaddr