Port-arm by thread

• Date Index
• Date Index (newest page)
• Old Index

• Power management and xscreensaver on armv7 (Pi2), Mayuresh
  • Re: Power management and xscreensaver on armv7 (Pi, Manuel Bouyer
• Regarding NetBSD-current on Raspberry Pi 3, Neeraj Pal
  • Re: Regarding NetBSD-current on Raspberry Pi 3, Andy Ruhl
  • Re: Regarding NetBSD-current on Raspberry Pi 3, Greg Troxel
    • Re: Regarding NetBSD-current on Raspberry Pi 3, Neeraj Pal
• GENERIC64 boots on OrangePi Zero Plus, Jason Thorpe
  • Re: GENERIC64 boots on OrangePi Zero Plus, Christos Zoulas
• OrangePi Zero Plus, Jason Thorpe
  • Re: OrangePi Zero Plus, Jason Thorpe
• 8.0_RC1 arm RPI2 xterm scrolls too slow, Mayuresh
• NetBSD 8.0_RC1 arm crashes on exiting X11, Mayuresh
• xrandr strange behavior on arm base X11, Mayuresh
• 8.0_RC1 Raspberry Pi 2 doesn't occupy full HDMI sc, Mayuresh
  • Re: 8.0_RC1 Raspberry Pi 2 doesn't occupy full HDM, Alan Corey
    • Re: 8.0_RC1 Raspberry Pi 2 doesn't occupy full HDM, Mayuresh
• Rockchip RK3328 support added to -current, Jared McNeill
  • Re: Rockchip RK3328 support added to -current, Dexter Haslem
• Re: getauxval AT_SECURE error [ was graphics/sane-, Mayuresh
  • <Possible follow-ups>
  • Re: getauxval AT_SECURE error [ was graphics/sane-, Mayuresh
• fortran, coypu
• Frequent crash with 8.99.17, Tom Ivar Helbekkmo
• How to specify userconf kernel options on armv7, Mayuresh
  • Re: How to specify userconf kernel options on armv, Mayuresh
    • Re: How to specify userconf kernel options on armv, Martin Neitzel
      • Re: How to specify userconf kernel options on armv, Martin Neitzel
      • Re: How to specify userconf kernel options on armv, Mayuresh
      • Re: How to specify userconf kernel options on armv, Mayuresh
      • Re: How to specify userconf kernel options on armv, Martin Husemann
      • Re: How to specify userconf kernel options on armv, Jared McNeill
      • Re: How to specify userconf kernel options on armv, Mayuresh
      • Re: How to specify userconf kernel options on armv, Martin Husemann
      • Re: How to specify userconf kernel options on armv, Mayuresh
  • Re: How to specify userconf kernel options on armv, maya
    • Re: How to specify userconf kernel options on armv, maya
• NetBSD/evbarm 32-bit GENERIC fails to build, Jason Thorpe
  • Re: NetBSD/evbarm 32-bit GENERIC fails to build, Jonathan A. Kollasch
    • Re: NetBSD/evbarm 32-bit GENERIC fails to build, Jason Thorpe
• How to write u-boot bootloader for Jetson TX1, Gmail TM
  • Re: How to write u-boot bootloader for Jetson TX1, Jared McNeill
    • Re: How to write u-boot bootloader for Jetson TX1, Gmail TM
      • Re: How to write u-boot bootloader for Jetson TX1, Jared McNeill
      • Re: How to write u-boot bootloader for Jetson TX1, Gmail TM
      • Re: How to write u-boot bootloader for Jetson TX1, Jared McNeill
      • Re: How to write u-boot bootloader for Jetson TX1, Gmail TM
      • Re: How to write u-boot bootloader for Jetson TX1, Jared McNeill
      • Re: How to write u-boot bootloader for Jetson TX1, Jason Thorpe
      • Re: How to write u-boot bootloader for Jetson TX1, Jared McNeill
  • Re: How to write u-boot bootloader for Jetson TX1, Jonathan A. Kollasch
• Status of run0 on armv7 NetBSD 8.0_RC1 rpi2, Mayuresh
  • Re: Status of run0 on armv7 NetBSD 8.0_RC1 rpi2, maya
    • Re: Status of run0 on armv7 NetBSD 8.0_RC1 rpi2, Mayuresh
    • Re: Status of run0 on armv7 NetBSD 8.0_RC1 rpi2, Mayuresh
• 2018-06-16-netbsd-raspi-earmv6hf.img (Re: Raspberr, Jun Ebihara
• Re: 8.0_RC1 armv7 RPi2 garbled HDMI screen, Mayuresh
• nvidia tegra jetson tk1 questions, Kirill Timofeev