NetBSD-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

5.0RC4: wscons vs X conflict



Hi,

I am trying to test the X server on my NetBSD/i386 5.0 RC4 machine. In
preparation of that, I have generated an xorg.conf file via "Xorg
-configure". When I start the server with this configuration, the
graphics are displayed correctly, and I can move the pointer using the
mouse.

However, when I stop the server or try to change consoles (for
instance via Ctrl-Alt-F1), the screen turns just black and remains so
even when I switch back to the X virtual console.

The keyboard seems to partly work: after killing the X server (ssh
into the machine, su, kill) I can blindly type shell commands on the
console which seem to be executed correctly but there is no display.

Console switching works without problems as long as the X server is
not yet startet. Also, the problem seems unrelated to ACPI (in case
that could matter).

Any ideas what could have gone wrong?

Kind regards
Ingolf

# dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_RC4 (GENERIC) #0: Wed Apr 15 12:24:14 UTC 2009
        
builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-RC4/i386/200904142015Z-obj/home/builds/ab/netbsd-5-0-RC4/src/sys/arch/i386/compile/GENERIC
total memory = 255 MB
avail memory = 239 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
VIA Technologies, Inc. VT8363 ( )
mainbus0 (root)
cpu0 at mainbus0: AMD 686-class, 797MHz, id 0x631
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <BIOSTA,AWRDACPI,42302e31>, AslId <AWRD,00000000>
LNKB: ACPI: Found matching pin for 0.9.INTA at func 0: 11
LNKC: ACPI: Found matching pin for 0.7.INTC at func 5: 5
LNKD: ACPI: Found matching pin for 0.7.INTD at func 2: 9
LNKD: BIOS IRQ 9 for 0.7.INTD is invalid
acpi0: SCI interrupting at int 11
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
LPT1 (PNP0400) at acpi0 not configured
pckbc1 at acpi0 (PS2M, PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PS2K, PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0305 (rev. 0x03)
agp0 at pchb0 (v2): aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0x8305 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1002 product 0x5046 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x1106 product 0x0686 (rev. 0x40)
viaide0 at pci0 dev 7 function 1
viaide0: VIA Technologies VT82C686A (Apollo KX133) ATA100 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 7 function 2: vendor 0x1106 product 0x3038 (rev. 0x16)
LNKD: Picked IRQ 5 with weight 9
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 7 function 3: vendor 0x1106 product 0x3038 (rev. 0x16)
uhci1: interrupting at irq 5
usb1 at uhci1: USB revision 1.0
pchb1 at pci0 dev 7 function 4
pchb1: vendor 0x1106 product 0x3057 (rev. 0x40)
auvia0 at pci0 dev 7 function 5: VIA Technologies VT82C686A AC'97
Audio (rev 0x50)
auvia0: interrupting at irq 5
auvia0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
auvia0: ac97: ext id 200<AMAP>
audio0 at auvia0: full duplex, independent
rtk0 at pci0 dev 9 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:00:1c:d3:c3:13
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
wd0 at atabus0 drive 0: <ST320413A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1 at atabus0 drive 1: <IBM-DTTA-351010>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 9541 MB, 19386 cyl, 16 head, 63 sec, 512 bytes/sect x 19541088 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd1(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <JLMS DVD-ROM LTD-166S, , DS0C> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 3
cd1 at atapibus0 drive 1: <TSSTcorp CDDVDW SH-S202N, , SB02> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 3 (using DMA)
cd1(viaide0:1:1): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
ulpt0 at uhub0 port 1 configuration 1 interface 0
ulpt0: Hewlett-Packard DeskJet 815C, rev 1.00/1.00, addr 2, iclass 7/1
ulpt0: using uni-directional mode
uhub2 at uhub0 port 2: NEC Corporation USB2.0 Hub Controller, class
9/0, rev 2.00/1.00, addr 3
uhub2: 4 ports with 4 removable, self powered
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)


Home | Main Index | Thread Index | Old Index