NetBSD-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: GOP and using monitor



Hello RVP,

On Fri, Oct 1, 2021 at 9:13 PM RVP <rvp%sdf.org@localhost> wrote:
>
> On Fri, 1 Oct 2021, Riza Dindir wrote:
>
> > In the dmesg it seems there are two genfb devices. Here is the output of dmesg.
> >
> > [     1.017264] genfb0 at pci0 dev 1 function 0: vendor 1002 product 1309 (rev. 0x00)
> > [     1.017264] genfb0: framebuffer at 0xe0000000, size 1366x768, depth 32, stride 5632
> > [     1.017264] genfb0: shadow framebuffer enabled, size 4224 KB
> > [     1.017264] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
> > [     1.017264] drm at genfb0 not configured
> > [     1.017264] genfb1 at pci1 dev 0 function 0: vendor 1002 product 6604 (rev. 0x00)
> >
> > There is the genfb for pci1, which I assume is the vga port output of
> > the laptop. But I might be wrong.
> >
>
> Framebuffers represent the memory on video cards, and it looks like you
> have 2 of them:
>
> vendor 1002 product 1309 => AMD/ATI Kaveri [Radeon R6/R7 Graphics]
> vendor 1002 product 6604 => AMD/ATI Opal XT [Radeon R7 M265/M365X/M465]
>
> Can you post a complete dmesg?

Here it is.

I have a radeon graphics card. It is a radeon device that is not
supported by the system. I have disabled it.

[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001,
2002, 2003, 2004, 2005,
[     1.000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017,
[     1.000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All
rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All
rights reserved.

[     1.000000] NetBSD 9.2 (GENERIC) #0: Wed May 12 13:15:55 UTC 2021
[     1.000000]
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
[     1.000000] total memory = 15306 MB
[     1.000000] avail memory = 14834 MB
[     1.000000] WARNING: module error: module `msdos' pushed by boot
loader already exists
[     1.000000] rnd: seeded with 256 bits
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[     1.000000] [   367.000000] radeon* disabled
[     1.000000] [   534.000000] acpibat* disabled
[     1.000000] RTC BIOS diagnostic error 0x80<clock_battery>
[     1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
quality 100
[     1.000003] efi: systbl at pa 8f6bef18
[     1.000003] Acer Aspire E5-551G (V1.08)
[     1.000003] mainbus0 (root)
[     1.000003] ACPI: RSDP 0x000000008FBFE014 000024 (v02 ACRSYS)
[     1.000003] ACPI: XSDT 0x000000008FBFE120 0000C4 (v01 ACRSYS
ACRPRDCT 00000001      01000013)
[     1.000003] ACPI: FACP 0x000000008FBFC000 00010C (v05 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: DSDT 0x000000008FBEB000 00C377 (v01 ACRSYS
ACRPRDCT F0000000 1025 00040000)
[     1.000003] ACPI: FACS 0x000000008FB65000 000040
[     1.000003] ACPI: UEFI 0x000000008FBFD000 000236 (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: HPET 0x000000008FBFB000 000038 (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: APIC 0x000000008FBFA000 000090 (v03 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: MCFG 0x000000008FBF9000 00003C (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: ASF! 0x000000008FBF8000 0000A5 (v32 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: BOOT 0x000000008FBEA000 000028 (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: WDRT 0x000000008FBE9000 000047 (v01 ACRSYS
ACRPRDCT 00000000 1025 00040000)
[     1.000003] ACPI: WDAT 0x000000008FBE8000 0001AC (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: FPDT 0x000000008FBE6000 000044 (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: MSDM 0x000000008FBE5000 000055 (v03 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: SSDT 0x000000008FBE4000 000B9C (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: SSDT 0x000000008FBDA000 009AC7 (v02 ACRSYS
ACRPRDCT 00000002 1025 00040000)
[     1.000003] ACPI: CRAT 0x000000008FBD9000 0005A0 (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: VFCT 0x000000008FBC9000 00F684 (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: SSDT 0x000000008FBC7000 000418 (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: SSDT 0x000000008FBC5000 001401 (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: SSDT 0x000000008FBC4000 00082B (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: SSDT 0x000000008FBC2000 001138 (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: BGRT 0x000000008FBC8000 000038 (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[     1.000003] ACPI: 7 ACPI AML tables successfully acquired and loaded
[     1.000003] ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x21, 24 pins
[     1.000003] ioapic1 at mainbus0 apid 5: pa 0xfec20000, version 0x21, 32 pins
[     1.000003] cpu0 at mainbus0 apid 16
[     1.000003] cpu0: AMD FX-7500 Radeon R7, 10 Compute Cores 4C+6G  ,
id 0x630f01
[     1.000003] cpu0: package 0, core 0, smt 0
[     1.000003] cpu1 at mainbus0 apid 17
[     1.000003] cpu1: AMD FX-7500 Radeon R7, 10 Compute Cores 4C+6G  ,
id 0x630f01
[     1.000003] cpu1: package 0, core 1, smt 0
[     1.000003] cpu2 at mainbus0 apid 18
[     1.000003] cpu2: AMD FX-7500 Radeon R7, 10 Compute Cores 4C+6G  ,
id 0x630f01
[     1.000003] cpu2: package 0, core 2, smt 0
[     1.000003] cpu3 at mainbus0 apid 19
[     1.000003] cpu3: AMD FX-7500 Radeon R7, 10 Compute Cores 4C+6G  ,
id 0x630f01
[     1.000003] cpu3: package 0, core 3, smt 0
[     1.000003] acpi0 at mainbus0: Intel ACPICA 20190405
[     1.000003] acpi0: X/RSDT: OemId <ACRSYS,ACRPRDCT,00000001>, AslId
<    ,01000013>
[     1.000003] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
[     1.000003] acpi0: SCI interrupting at int 9
[     1.000003] acpi0: fixed power button present
[     1.000003] timecounter: Timecounter "ACPI-Fast" frequency 3579545
Hz quality 1000
[     1.014897] hpet0 at acpi0: high precision event timer (mem
0xfed00000-0xfed00400)
[     1.014897] timecounter: Timecounter "hpet0" frequency 14318180 Hz
quality 2000
[     1.017411] acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
[     1.017411] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[     1.017411] MEMR (PNP0C02) at acpi0 not configured
[     1.017411] acpivga0 at acpi0 (VGA): ACPI Display Adapter
[     1.017411] acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
[     1.017411] acpiout0: brightness levels: [0-100]
[     1.017411] acpivga0: connected output devices:
[     1.017411] acpivga0:   0x0100: Ext. Monitor, head 0, bios detect
[     1.017411] acpivga0:   0x0110 (acpiout0): LCD Panel, head 0, bios detect
[     1.017411] acpivga0:   0x0200: TV, head 0
[     1.017411] acpivga0:   0x0210: Unknown Output Device, head 0, bios detect
[     1.017411] acpivga0:   0x0220: Unknown Output Device, head 0, bios detect
[     1.017411] acpivga1 at acpi0 (VGA): ACPI Display Adapter
[     1.017411] acpiout1 at acpivga1 (LCD, 0x0110): ACPI Display Output Device
[     1.017411] acpiout1: brightness levels: [0-100]
[     1.017411] acpivga1: connected output devices:
[     1.017411] acpivga1:   0x0100: Ext. Monitor, head 0, bios detect
[     1.017411] acpivga1:   0x0110 (acpiout1): LCD Panel, head 0, bios detect
[     1.017411] acpivga1:   0x0200: TV, head 0
[     1.017411] acpivga1:   0x0210: Unknown Output Device, head 0, bios detect
[     1.017411] acpivga1:   0x0220: Unknown Output Device, head 0, bios detect
[     1.017411] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[     1.017411] spkr0 at pcppi1: PC Speaker
[     1.017411] wsbell at spkr0 not configured
[     1.017411] midi0 at pcppi1: PC speaker
[     1.017411] sysbeep0 at pcppi1
[     1.017411] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
[     1.017411] pckbc1 at acpi0 (PS2K, 10250759) (kbd port): io 0x60,0x64 irq 1
[     1.017411] SYSR (PNP0C02) at acpi0 not configured
[     1.017411] MEM (PNP0C01) at acpi0 not configured
[     1.017411] BAT1 (PNP0C0A) at acpi0 not configured
[     1.017411] acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
[     1.017411] acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
[     1.017411] acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[     1.017411] acpibut2 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[     1.017411] acpiwmi0 at acpi0 (WMID, PNP0C14-APGe): ACPI WMI Interface
[     1.017411] acpiwmibus at acpiwmi0 not configured
[     1.017411] acpiwmi1 at acpi0 (CWMI, PNP0C14-COMP): ACPI WMI Interface
[     1.017411] acpiwmibus at acpiwmi1 not configured
[     1.017411] AWR0 (PNP0C02) at acpi0 not configured
[     1.017411] ABR0 (PNP0C02) at acpi0 not configured
[     1.017411] ABR1 (PNP0C02) at acpi0 not configured
[     1.017411] AWR1 (PNP0C02) at acpi0 not configured
[     1.017411] ABR2 (PNP0C02) at acpi0 not configured
[     1.017411] ABR3 (PNP0C02) at acpi0 not configured
[     1.017411] ABR4 (PNP0C02) at acpi0 not configured
[     1.017411] ABR5 (PNP0C02) at acpi0 not configured
[     1.017411] ABR6 (PNP0C02) at acpi0 not configured
[     1.017411] AWR2 (PNP0C02) at acpi0 not configured
[     1.017411] ABR7 (PNP0C02) at acpi0 not configured
[     1.017411] ABR8 (PNP0C02) at acpi0 not configured
[     1.017411] ABR9 (PNP0C02) at acpi0 not configured
[     1.017411] ABRA (PNP0C02) at acpi0 not configured
[     1.017411] ABRB (PNP0C02) at acpi0 not configured
[     1.017411] acpiwdrt0 at acpi0: mem 0xfec000f0,0xfec000f4
[     1.017411] acpiwdrt0: watchdog interval 1-1023 sec.
[     1.017411] ACPI: Enabled 1 GPEs in block 00 to 1F
[     1.017411] attimer1: attached to pcppi1
[     1.017411] pckbd0 at pckbc1 (kbd slot)
[     1.017411] pckbc1: using irq 1 for kbd slot
[     1.017411] wskbd0 at pckbd0: console keyboard
[     1.017411] pci0 at mainbus0 bus 0: configuration mode 1
[     1.017411] pci0: i/o space, memory space enabled, rd/line,
rd/mult, wr/inv ok
[     1.017411] pchb0 at pci0 dev 0 function 0: vendor 1022 product
1422 (rev. 0x00)
[     1.017411] genfb0 at pci0 dev 1 function 0: vendor 1002 product
1309 (rev. 0x00)
[     1.017411] genfb0: framebuffer at 0xe0000000, size 1366x768,
depth 32, stride 5632
[     1.017411] genfb0: shadow framebuffer enabled, size 4224 KB
[     1.017411] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100
emulation), using wskbd0
[     1.017411] wsmux1: connecting to wsdisplay0
[     1.017411] drm at genfb0 not configured
[     1.017411] hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
[     1.017411] hdaudio0: interrupting at msi0 vec 0
[     1.017411] hdafg0 at hdaudio0: vendor 1002 product aa01
[     1.017411] hdafg0: HDMI00 2ch: Digital Out [Jack]
[     1.017411] hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
[     1.017411] pchb1 at pci0 dev 2 function 0: vendor 1022 product
1424 (rev. 0x00)
[     1.017411] ppb0 at pci0 dev 2 function 1: vendor 1022 product
1425 (rev. 0x00)
[     1.017411] ppb0: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x16 @ 2.5GT/s
[     1.017411] ppb0: link is x8 @ 2.5GT/s
[     1.017411] pci1 at ppb0 bus 1
[     1.017411] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.017411] genfb1 at pci1 dev 0 function 0: vendor 1002 product
6604 (rev. 0x00)
[     1.017411] pchb2 at pci0 dev 3 function 0: vendor 1022 product
1424 (rev. 0x00)
[     1.017411] ppb1 at pci0 dev 3 function 1: vendor 1022 product
1426 (rev. 0x00)
[     1.017411] ppb1: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[     1.017411] pci2 at ppb1 bus 2
[     1.017411] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.017411] rtsx0 at pci2 dev 0 function 0: vendor 10ec product
5287 (rev. 0x01)
[     1.017411] rtsx0: interrupting at msix1 vec 0
[     1.017411] sdmmc0 at rtsx0
[     1.017411] re0 at pci2 dev 0 function 1: RealTek 8168/8111 PCIe
Gigabit Ethernet (rev. 0x12)
[     1.017411] re0: interrupting at msix2 vec 0
[     1.017411] re0: Ethernet address f0:76:1c:39:fb:49
[     1.017411] re0: using 256 tx descriptors
[     1.017411] rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
[     1.017411] rgephy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, 1000baseT-FDX, auto
[     1.017411] ppb2 at pci0 dev 3 function 2: vendor 1022 product
1426 (rev. 0x00)
[     1.017411] ppb2: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[     1.017411] pci3 at ppb2 bus 3
[     1.017411] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.017411] vendor 168c product 0036 (miscellaneous network,
revision 0x01) at pci3 dev 0 function 0 not configured
[     1.017411] pchb3 at pci0 dev 4 function 0: vendor 1022 product
1424 (rev. 0x00)
[     1.017411] xhci0 at pci0 dev 16 function 0: vendor 1022 product
7814 (rev. 0x09)
[     1.017411] xhci0: interrupting at msix3 vec 0
[     1.017411] xhci0: xHCI version 1.0
[     1.017411] usb0 at xhci0: USB revision 3.0
[     1.017411] usb1 at xhci0: USB revision 2.0
[     1.017411] ahcisata0 at pci0 dev 17 function 0: vendor 1022
product 7801 (rev. 0x40)
[     1.017411] ahcisata0: 64-bit DMA
[     1.017411] ahcisata0: ignoring broken port multiplier support
[     1.017411] ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP
0xf730ff01<PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
[     1.017411] ahcisata0: interrupting at msi4 vec 0
[     1.017411] atabus0 at ahcisata0 channel 0
[     1.017411] atabus1 at ahcisata0 channel 1
[     1.017411] ohci0 at pci0 dev 18 function 0: vendor 1022 product
7807 (rev. 0x11)
[     1.017411] ohci0: interrupting at ioapic0 pin 18
[     1.017411] ohci0: OHCI version 1.0, legacy support
[     1.017411] usb2 at ohci0: USB revision 1.0
[     1.017411] ehci0 at pci0 dev 18 function 2: vendor 1022 product
7808 (rev. 0x11)
[     1.017411] ehci0: interrupting at ioapic0 pin 17
[     1.017411] ehci0: BIOS has given up ownership
[     1.017411] ehci0: EHCI version 1.0
[     1.017411] ehci0: 1 companion controller, 5 ports: ohci0
[     1.017411] usb3 at ehci0: USB revision 2.0
[     1.017411] ohci1 at pci0 dev 19 function 0: vendor 1022 product
7807 (rev. 0x11)
[     1.017411] ohci1: interrupting at ioapic0 pin 18
[     1.017411] ohci1: OHCI version 1.0, legacy support
[     1.017411] usb4 at ohci1: USB revision 1.0
[     1.017411] ehci1 at pci0 dev 19 function 2: vendor 1022 product
7808 (rev. 0x11)
[     1.017411] ehci1: interrupting at ioapic0 pin 17
[     1.017411] ehci1: BIOS has given up ownership
[     1.017411] ehci1: EHCI version 1.0
[     1.017411] ehci1: 1 companion controller, 5 ports: ohci1
[     1.017411] usb5 at ehci1: USB revision 2.0
[     1.017411] piixpm0 at pci0 dev 20 function 0: vendor 1022 product
780b (rev. 0x16)
[     1.017411] piixpm0: SMBus initialization failed
[     1.017411] hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
[     1.017411] hdaudio1: interrupting at ioapic0 pin 16
[     1.017411] hdafg1 at hdaudio1: vendor 10ec product 0283
[     1.017411] hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
[     1.017411] hdafg1: ADC01 2ch: Mic In [Built-In]
[     1.017411] hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16
PCM20 PCM24 AC3
[     1.017411] audio0 at hdafg1: playback, capture, full duplex, independent
[     1.017411] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes
(10ms) for playback
[     1.017411] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes
(10ms) for recording
[     1.017411] spkr1 at audio0: PC Speaker (synthesized)
[     1.017411] wsbell at spkr1 not configured
[     1.017411] pcib0 at pci0 dev 20 function 3: vendor 1022 product
780e (rev. 0x11)
[     1.017411] ppb3 at pci0 dev 20 function 4: vendor 1022 product
780f (rev. 0x40)
[     1.017411] pci4 at ppb3 bus 4
[     1.017411] pci4: i/o space, memory space enabled
[     1.017411] pchb4 at pci0 dev 24 function 0: vendor 1022 product
141a (rev. 0x00)
[     1.017411] pchb5 at pci0 dev 24 function 1: vendor 1022 product
141b (rev. 0x00)
[     1.017411] pchb6 at pci0 dev 24 function 2: vendor 1022 product
141c (rev. 0x00)
[     1.017411] pchb7 at pci0 dev 24 function 3: vendor 1022 product
141d (rev. 0x00)
[     1.017411] pchb8 at pci0 dev 24 function 4: vendor 1022 product
141e (rev. 0x00)
[     1.017411] pchb9 at pci0 dev 24 function 5: vendor 1022 product
141f (rev. 0x00)
[     1.017411] isa0 at pcib0
[     1.017411] acpicpu0 at cpu0: ACPI CPU
[     1.017411] acpicpu0: C1: HLT, lat   0 us, pow     0 mW
[     1.017411] acpicpu0: C2: I/O, lat 400 us, pow     0 mW
[     1.017411] acpicpu0: P0: FFH, lat   4 us, pow  5087 mW, 2100 MHz
[     1.017411] acpicpu0: P1: FFH, lat   4 us, pow  4230 mW, 1900 MHz
[     1.017411] acpicpu0: P2: FFH, lat   4 us, pow  3052 mW, 1600 MHz
[     1.017411] acpicpu0: P3: FFH, lat   4 us, pow  2240 mW, 1300 MHz
[     1.017411] acpicpu0: P4: FFH, lat   4 us, pow  1836 mW, 1100 MHz
[     1.017411] acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
[     1.017411] acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
[     1.017411] acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
[     1.017411] acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
[     1.017411] acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
[     1.017411] acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
[     1.017411] acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
[     1.017411] acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
[     1.017411] acpicpu1 at cpu1: ACPI CPU
[     1.017411] acpicpu2 at cpu2: ACPI CPU
[     1.017411] acpicpu3 at cpu3: ACPI CPU
[     1.017411] timecounter: Timecounter "clockinterrupt" frequency
100 Hz quality 0
[     1.663000] autoconfiguration error: ERROR: 369 cycle TSC drift observed
[     1.663000] acpiacad0: AC adapter online.
[     1.663000] acpivga0: connected output devices:
[     1.663000] acpivga0:   0x0100: Ext. Monitor, head 0, bios detect
[     1.663000] acpivga0:   0x0110 (acpiout0): LCD Panel, head 0, bios detect
[     1.663000] acpivga0:   0x0200: TV, head 0
[     1.663000] acpivga0:   0x0210: Unknown Output Device, head 0, bios detect
[     1.663000] acpivga0:   0x0220: Unknown Output Device, head 0, bios detect
[     1.663000] acpivga1: connected output devices:
[     1.663000] acpivga1:   0x0100: Ext. Monitor, head 0, bios detect
[     1.663000] acpivga1:   0x0110 (acpiout1): LCD Panel, head 0, bios detect
[     1.663000] acpivga1:   0x0200: TV, head 0
[     1.663000] acpivga1:   0x0210: Unknown Output Device, head 0, bios detect
[     1.663000] acpivga1:   0x0220: Unknown Output Device, head 0, bios detect
[     1.663000] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000),
class 9/0, rev 3.00/1.00, addr 0
[     1.663000] uhub0: 2 ports with 2 removable, self powered
[     1.663000] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000),
class 9/0, rev 2.00/1.00, addr 0
[     1.663000] uhub1: 2 ports with 2 removable, self powered
[     1.673007] IPsec: Initialized Security Association Processing.
[     1.683013] uhub2 at usb2: NetBSD (0000) OHCI root hub (0000),
class 9/0, rev 1.00/1.00, addr 1
[     1.683013] uhub2: 5 ports with 5 removable, self powered
[     1.683013] uhub3 at usb3: NetBSD (0000) EHCI root hub (0000),
class 9/0, rev 2.00/1.00, addr 1
[     1.683013] uhub3: 5 ports with 5 removable, self powered
[     1.683013] uhub4 at usb4: NetBSD (0000) OHCI root hub (0000),
class 9/0, rev 1.00/1.00, addr 1
[     1.683013] uhub4: 5 ports with 5 removable, self powered
[     1.683013] uhub5 at usb5: NetBSD (0000) EHCI root hub (0000),
class 9/0, rev 2.00/1.00, addr 1
[     1.683013] uhub5: 5 ports with 5 removable, self powered
[     1.763110] ahcisata0 port 0: device present, speed: 6.0Gb/s
[     1.763110] ahcisata0 port 1: device present, speed: 1.5Gb/s
[     3.283838] umass0 at uhub1 port 1 configuration 1 interface 0
[     3.283838] umass0: SanDisk (0x781) Cruzer Blade (0x5567), rev
2.00/1.00, addr 1
[     3.283838] umass0: using SCSI over Bulk-Only
[     3.283838] scsibus0 at umass0: 2 targets, 1 lun per target
[     3.283838] sd0 at scsibus0 target 0 lun 0: <SanDisk, Cruzer
Blade, 1.00> disk removable
[     3.283838] sd0: 14664 MB, 29793 cyl, 16 head, 63 sec, 512
bytes/sect x 30031872 sectors
[     3.293780] wd0 at atabus0 drive 0
[     3.293780] sd0: GPT GUID: d12efb16-91fe-4fe1-8b2f-287356b1a0cc
[     3.293780] wd0: <ST1000LM024 HN-M101MBB>
[     3.293780] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[     3.293780] wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512
bytes/sect x 1953525168 sectors (0 bytes/physsect; first aligned
sector: 8)
[     3.293780] dk0 at sd0: "EFI system", 524288 blocks at 4096, type: msdos
[     3.293780] dk1 at sd0: "Data", 29499392 blocks at 528384, type: ntfs
[     3.313909] wd0: GPT GUID: 3a669cf7-ae9b-416d-828c-ecf41e00c734
[     3.313909] dk2 at wd0: "Basic data partition", 1228800 blocks at
2048, type: <unknown>
[     3.313909] dk3 at wd0: "EFI system partition", 614400 blocks at
1230848, type: msdos
[     3.313909] dk4 at wd0: "Microsoft reserved partition", 262144
blocks at 1845248, type: <unknown>
[     3.313909] dk5 at wd0: "a23ff696-2125-43f3-8208-bbc7f25fcce8",
348157952 blocks at 2107392, type: ntfs
[     3.313909] autoconfiguration error: wd0: wedge named 'Basic data
partition' already existed, using
'a23ff696-2125-43f3-8208-bbc7f25fcce8'
[     3.313909] dk6 at wd0: "09022790-6598-4b7f-9121-5c62094477d2",
786223104 blocks at 350267392, type: ntfs
[     3.313909] autoconfiguration error: wd0: wedge named 'Basic data
partition' already existed, using
'09022790-6598-4b7f-9121-5c62094477d2'
[     3.313909] dk7 at wd0: "1efca3a4-6757-4153-83f0-3860a0537de0",
784334848 blocks at 1136492544, type: ntfs
[     3.313909] autoconfiguration error: wd0: wedge named 'Basic data
partition' already existed, using
'1efca3a4-6757-4153-83f0-3860a0537de0'
[     3.313909] dk8 at wd0: "752f51a4-0756-410f-baea-fd3b8a5c8415",
32694272 blocks at 1920829440, type: <unknown>
[     3.313909] autoconfiguration error: wd0: wedge named 'Basic data
partition' already existed, using
'752f51a4-0756-410f-baea-fd3b8a5c8415'
[     3.323936] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
[     3.323936] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
[     3.323936] wd1 at atabus1 drive 0
[     3.323936] wd1: <ST9320423AS>
[     3.323936] wd1: drive supports 16-sector PIO transfers, LBA48 addressing
[     3.323936] wd1: 298 GB, 620181 cyl, 16 head, 63 sec, 512
bytes/sect x 625142448 sectors
[     3.413900] wd1: GPT GUID: 72880354-7074-4af5-a6fb-7153f58998ce
[     3.413900] dk9 at wd1: "92ad5966-19d0-4138-bb94-1fb301090cdc",
245760 blocks at 4096, type: msdos
[     3.413900] autoconfiguration error: wd1: wedge named 'EFI system'
already existed, using '92ad5966-19d0-4138-bb94-1fb301090cdc'
[     3.413900] dk10 at wd1: "NetBSD", 574619648 blocks at 249856, type: ffs
[     3.413900] dk11 at wd1: "swap", 50270208 blocks at 574869504, type: swap
[     3.423904] wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 5 (Ultra/100), NCQ (32 tags)
[     3.423904] wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags)
[     3.924083] urtw0 at uhub3 port 1: RTL8187 rev 0x04, RFv1uhidev0
at uhub4 port 1 configuration 1 interface 0
[     4.634421] uhidev0: vendor 06cb (0x6cb) product 2970 (0x2970),
rev 2.00/0.08, addr 2, iclass 3/0
[     4.654431] uhidev0: 239 report ids
[     4.654431] ums0 at uhidev0 reportid 2: 2 buttons
[     4.654431] wsmouse0 at ums0 mux 0
[     4.654431] uhid0 at uhidev0 reportid 3: input=9, output=0, feature=0
[     4.654431] uhid1 at uhidev0 reportid 4: input=0, output=0, feature=1
[     4.654431] uhid2 at uhidev0 reportid 6: input=0, output=0, feature=1
[     4.654431] uhid3 at uhidev0 reportid 7: input=0, output=0, feature=256
[     4.654431] uhid4 at uhidev0 reportid 8: input=0, output=0, feature=1
[     4.654431] uhid5 at uhidev0 reportid 9: input=0, output=20, feature=0
[     4.654431] uhid6 at uhidev0 reportid 10: input=0, output=20, feature=0
[     4.654431] uhid7 at uhidev0 reportid 11: input=35, output=0, feature=0
[     4.654431] uhid8 at uhidev0 reportid 12: input=35, output=0, feature=0
[     4.654431] uhid9 at uhidev0 reportid 13: input=0, output=0, feature=1
[     4.654431] uhid10 at uhidev0 reportid 14: input=0, output=0, feature=1
[     4.654431] uhid11 at uhidev0 reportid 15: input=0, output=0, feature=1
[     4.664438] uhid12 at uhidev0 reportid 238: input=0, output=4, feature=0
[     4.664438] uhid13 at uhidev0 reportid 239: input=0, output=0, feature=16
[     4.994593] , address 00:0f:b5:d8:c3:35
[     4.994593] urtw0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[     4.994593] urtw0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps
9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[     7.125660] uhub6 at uhub2 port 2: vendor 1a40 (0x1a40) USB 2.0
Hub [Safe] (0x101), class 9/0, rev 2.00/1.11, addr 2
[     7.135952] uhub6: 4 ports with 4 removable, self powered
[     7.255775] uvideo0 at uhub3 port 3 configuration 1 interface 0:
NC.21411.029433051FDLM0002 (0x1bcf) HD WebCam (0x2c6e), rev 2.00/0.02,
addr 3
[     7.325806] video0 at uvideo0: NC.21411.029433051FDLM0002 (0x1bcf)
HD WebCam (0x2c6e), rev 2.00/0.02, addr 3
[     8.506335] uhidev1 at uhub6 port 2 configuration 1 interface 0
[     8.506335] uhidev1: Logitech (0x46d) USB Receiver (0xc52f), rev
2.00/30.00, addr 3, iclass 3/1
[     8.516346] ums1 at uhidev1: 16 buttons, W and Z dirs
[     8.516346] wsmouse1 at ums1 mux 0
[     8.516346] uhidev2 at uhub6 port 2 configuration 1 interface 1
[     8.516346] uhidev2: Logitech (0x46d) USB Receiver (0xc52f), rev
2.00/30.00, addr 3, iclass 3/0
[     8.516346] uhidev2: 17 report ids
[     8.516346] uhid14 at uhidev2 reportid 3: input=4, output=0, feature=0
[     8.516346] uhid15 at uhidev2 reportid 16: input=6, output=6, feature=0
[     8.516346] uhid16 at uhidev2 reportid 17: input=19, output=19, feature=0
[     9.557435] uhidev3 at uhub6 port 4 configuration 1 interface 0
[     9.557435] uhidev3: Logitech (0x46d) USB Keyboard (0xc31c), rev
1.10/64.00, addr 4, iclass 3/1
[     9.567249] ukbd0 at uhidev3
[     9.977095] wskbd1 at ukbd0 mux 1
[     9.977095] wskbd1: connecting to wsdisplay0
[     9.977095] uhidev4 at uhub6 port 4 configuration 1 interface 1
[     9.977095] uhidev4: Logitech (0x46d) USB Keyboard (0xc31c), rev
1.10/64.00, addr 4, iclass 3/0
[     9.987053] uhidev4: 3 report ids
[     9.987053] uhid17 at uhidev4 reportid 1: input=1, output=0, feature=0
[     9.987053] uhid18 at uhidev4 reportid 2: input=1, output=0, feature=0
[     9.987053] uhid19 at uhidev4 reportid 3: input=3, output=0, feature=0
[    10.237835] WARNING: 6 errors while detecting hardware; check system log.
[    10.237835] boot device: wd1
[    10.237835] root on dk10 dumps on dk11
[    10.287222] root file system type: ffs
[    10.287222] kern.module.path=/stand/amd64/9.2/modules
[    11.757926] ubt0 at uhub2 port 5
[    11.757926] ubt0: Lite-On Technology (0x4ca) product 300b
(0x300b), rev 1.10/0.01, addr 5
[    28.976119] wsdisplay0: screen 1 added (default, vt100 emulation)
[    28.976119] wsdisplay0: screen 2 added (default, vt100 emulation)
[    28.976119] wsdisplay0: screen 3 added (default, vt100 emulation)
[    28.976119] wsdisplay0: screen 4 added (default, vt100 emulation)
[    47.495514] ohci0: WARNING: addr 0x89ab76b0 not found

>
> -RVP

Riza


Home | Main Index | Thread Index | Old Index