Re: Xorg and thinkpad x200s

[Pau <vim.unix%googlemail.com@localhost>]

There you go...

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.23 (GENERIC) #0: Wed Jan  6 07:54:35 UTC 2010
        
builds%b8.netbsd.org@localhost:/home/builds/ab/HEAD/i386/201001060000Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
total memory = 3032 MB
avail memory = 2968 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 74695KG (ThinkPad X200s)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1862MHz, id 0x10676
cpu1 at mainbus0 apid 1: Intel 686-class, 1862MHz, id 0x10676
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20090730
acpi0: X/RSDT: OemId <LENOVO,TP-6D   ,00001100>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
npx1 at acpi0 (FPU, PNP0C04): io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM3780) (aux port): irq 12
TPM (INTC0102) at acpi0 not configured
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
ACPI Warning for \_SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to
expected String at index 9 (20090730/nsrepair-215)
ACPI Warning for \_SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to
expected String at index 10 (20090730/nsrepair-215)
ACPI Warning for \_SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to
expected String at index 11 (20090730/nsrepair-215)
ACPI Warning for \_SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to
expected String at index 12 (20090730/nsrepair-215)
acpibat0: battery info: SANYO, LION, 42T4540   566
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpitz0 at acpi0 (THM0): critical 127.0C, passive cooling
acpitz1 at acpi0 (THM1): critical 104.0C passive 53.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2a40 (rev. 0x07)
agp0 at pchb0: detected 32764k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a42 (rev. 0x07)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x2a43 (miscellaneous display, revision 0x07) at
pci0 dev 2 function 1 not configured
vendor 0x8086 product 0x2a44 (miscellaneous communications, revision
0x07) at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2: vendor 0x8086 product 0x2a46 (rev. 0x07)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to native-PCI mode
pciide0: using ioapic0 pin 18 for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel wired to native-PCI mode
atabus1 at pciide0 channel 1
vendor 0x8086 product 0x2a47 (serial communications, interface 0x02,
revision 0x07) at pci0 dev 3 function 3 not configured
wm0 at pci0 dev 25 function 0: 82801I mobile (AMT) LAN Controller, rev. 3
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:1f:16:0a:2b:69
makphy0 at wm0 phy 2: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 0x8086 product 0x2939 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 17
hdafg0 at hdaudio0 vendor 0x14F1 product 0x5051 nid 0x01 (firmware
configuration)
hdafg0: DAC0:10, Analog HP Out: Jack (Green, 16)
hdafg0: ADC1:15, Analog Mic In: Jack (Pink, 18)
hdafg0: ADC2:14, Analog Mic In: Fixed Function (Unknown, 1D)
hdafg0: 2ch/2ch 44100Hz-96000Hz 16/16 20/32 24/32
audio0 at hdafg0: full duplex, playback, capture, independent
hdvsmfg at hdaudio0 vendor 0x14F1 product 0x5051 nid 0x02 not configured
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x03)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2942 (rev. 0x03)
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: vendor 0x8086 product 0x4236 (rev. 0x00)
iwn0: interrupting at ioapic0 pin 17
iwn0: MIMO 3T3R, MoW, address 00:16:ea:e5:b2:50
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 3: vendor 0x8086 product 0x2946 (rev. 0x03)
ppb2: disabling notification events
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 16
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 17
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x03)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x03)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x93)
pci4 at ppb3 bus 13
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2917 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
gpiobus at ichlpcib0 not configured
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2929
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: AHCI revision 1.2, 4 ports, 32 command slots, features 0xef20e0a0
atabus2 at ahcisata0 channel 0
atabus3 at ahcisata0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
isapnp0 at isa0 port 0x279
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus2 drive 0: <HITACHI HTS543225L9SA00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
(Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ugen0 at uhub1 port 1
ugen0: vendor 0x08ff Fingerprint Sensor, rev 2.00/17.03, addr 2
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)


2010/1/11 Manuel Bouyer <bouyer%antioche.eu.org@localhost>:
> On Mon, Jan 11, 2010 at 01:16:34PM +0100, Pau wrote:
>> Hello,
>>
>> the bios was already on AHCI...
>
> Could you post the complete dmesg for this system ? If the main controller
> is in AHCI mode I'd like to see what this pciide is ...
>
> --
> Manuel Bouyer <bouyer%antioche.eu.org@localhost>
>     NetBSD: 26 ans d'experience feront toujours la difference
> --
>