Re: weird ACPI error messages on Compaq laptop

[Rhialto <rhialto%falu.nl@localhost>]

A further update on my new laptop: I have tried a -current kernel
(fairly recent, of when I last happened to update, with custom config
file) with the 5.0.1 userland.

It fares much better. AGP is now detected, i915 DRM is now detected, the
NIC's MAC is detected. Audio at least gives sound via headphone plug,
but not via speakers (just like Xubuntu; I don't remember any sounds
from the speaker while I was refusing the MSWindows 7 EULA though).
dmesg.boot below.

The ACPI problem remains though, with AE_NOT_FOUND messages every 30
seconds.

I re-enabled the hardware cursor and acceleration in xorg.conf, and
this resulted unfortunately in some AGP error which prevented X from
working at all. This is what Xorg.0.log ends with:

    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.2
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x4
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (WW) intel(0): remove MTRR d0000000 - d0080000
    (WW) intel(0): remove MTRR d0200000 - d0400000
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xd0000000
    (II) intel(0): [drm] ring buffer = 0xc0000000
    (II) intel(0): [drm] mapped front buffer at 0xc0100000, handle = 0xc0100000
    (II) intel(0): [drm] mapped back buffer at 0xc29a0000, handle = 0xc29a0000
    (II) intel(0): [drm] mapped depth buffer at 0xc33c8000, handle = 0xc33c8000
    (II) intel(0): [drm] mapped classic textures at 0xc3f80000, handle = 
0xc3f80000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (WW) intel(0): remove MTRR d0000000 - d0080000
    (WW) intel(0): remove MTRR d0200000 - d0400000
    (WW) intel(0): set MTRR c0000000 - d0000000
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 
0x0000
    (WW) intel(0): remove MTRR a0000 - b0000
    (II) EXA(0): Offscreen pixmap area of 31948800 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II)         Solid
    (II)         Copy
    (II)         Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 6 at 0x03f7f000 (pgoffset 16255)
    (WW) intel(0): xf86BindGARTMemory: binding of gart memory with key 6
            at offset 0x3f7f000 failed (Invalid argument)

    Fatal server error:
    Couldn't bind memory for HW status

Any ideas about that?

dmesg:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.24 (VARGAZ) #1: Tue Feb 16 23:05:19 CET 2010
        
rhialto%vargaz.falu.nl@localhost:/home/rhialto/tmp/obj.amd64/sys/arch/amd64/compile/VARGAZ
total memory = 3998 MB
avail memory = 3866 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 0x80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard Compaq Presario CQ71 Notebook PC (Rev 1)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2095MHz, id 0x1067a
cpu1 at mainbus0 apid 1: Intel 686-class, 2095MHz, id 0x1067a
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20090730
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000001>, AslId <    ,01000013>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff irq 0,8
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
pckbc1 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOUE, SYN1E08) (aux port): irq 12
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
WMID (PNP0C14) [WMI mapper device] at acpi0 not configured
acpidalb0 at acpi0 (QBTN, PNP0C32-1): Direct Application Launch Button
acpidalb1 at acpi0 (DBTN, PNP0C32-2): Direct Application Launch Button
acpidalb2 at acpi0 (MBTN, PNP0C32-3): Direct Application Launch Button
acpidalb3 at acpi0 (EBTN, PNP0C32-4): Direct Application Launch Button
acpidalb4 at acpi0 (PBTN, PNP0C32-6): Direct Application Launch Button
acpidalb5 at acpi0 (VBTN, PNP0C32-7): Direct Application Launch Button
acpidalb6 at acpi0 (TBTN, PNP0C32-8): Direct Application Launch Button
acpitz0 at acpi0 (TZ01):ACPI Error (psargs-0464): [\_PR_.CPU0._PPC] Namespace 
lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0633): Method parse/execution failed [\CPUL] (Node 
0xffff800007b51700), AE_NOT_FOUND
ACPI Error (psparse-0633): Method parse/execution failed [\_TZ_.TZ01.OTHD] 
(Node 0xffff800007b51960), AE_NOT_FOUND
ACPI Error (psparse-0633): Method parse/execution failed [\_TZ_.TZ01._TMP] 
(Node 0xffff800007b51a40), AE_NOT_FOUND
 hot 110.0C passive -273.-3C, passive cooling
ACPI Error (psargs-0464): [\_PR_.CPU0._PPC] Namespace lookup failure, 
AE_NOT_FOUND
ACPI Error (psparse-0633): Method parse/execution failed [\CPUL] (Node 
0xffff800007b51700), AE_NOT_FOUND
ACPI Error (psparse-0633): Method parse/execution failed [\_TZ_.TZ01.OTHD] 
(Node 0xffff800007b51960), AE_NOT_FOUND
ACPI Error (psparse-0633): Method parse/execution failed [\_TZ_.TZ01._TMP] 
(Node 0xffff800007b51a40), AE_NOT_FOUND
acpitz0: failed to evaluate _TMP
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.5
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82GM45 Host Bridge (rev. 0x07)
agp0 at pchb0: detected 65532k stolen memory
agp0: aperture at 0xc0000000, size 0x10000000
vga0 at pci0 dev 2 function 0: Intel 82GM45 Integrated Graphics Device (rev. 
0x07)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
i915drm0 at vga0: Mobile IntelM-BM-. GM45 Express Chipset
i915drm0: AGP at 0xc0000000 256MB
i915drm0: Initialized i915 1.6.0 20080730
Intel 82GM45 Integrated Graphics Device (miscellaneous display, revision 0x07) 
at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: Intel 82801I USB EHCI Controller (rev. 0x03)
ehci0: interrupting at ioapic0 pin 19
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0 vendor 0x111D product 0x7608 nid 0x01 (firmware 
configuration)
hdafg0: disable assoc 2 (3) [trace failed]
hdafg0:   assoc 2 pin0: 0C
hdafg0: DAC0:10, Analog HP Out: Jack (Black, 0A)
hdafg0: ADC1:12, Analog Mic In: Jack (Black, 0B)
hdafg0: 2ch/2ch 44100Hz-192000Hz 16/16 20/32 24/32
audio0 at hdafg0: full duplex, playback, capture, independent
hdafg1 at hdaudio0 vendor 0x8086 product 0x2802 nid 0x01 (firmware 
configuration)
hdafg1: DAC0:02, Digital Digital Other Out: Jack (Unknown, 03)
hdafg1: 2ch/0ch 48000Hz 16/16*
audio1 at hdafg1: full duplex, playback, capture, independent
ppb0 at pci0 dev 28 function 0: Intel 82801I PCI Express Port #1 (rev. 0x03)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
Atheros Communications product 0x002b (miscellaneous network, revision 0x01) at 
pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1: Intel 82801I PCI Express Port #2 (rev. 0x03)
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 
10/100BaseTX (rev. 0x02)
re0: interrupting at ioapic0 pin 17
re0: Ethernet address 00:26:9e:ce:8c:54
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci2 at pci0 dev 29 function 0: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci2: interrupting at ioapic0 pin 20
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci3: interrupting at ioapic0 pin 19
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci4: interrupting at ioapic0 pin 16
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 3: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: Intel 82801I USB EHCI Controller (rev. 0x03)
ehci1: interrupting at ioapic0 pin 20
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb2 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x93)
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0: Intel 82801IM LPC Interface Bridge (rev. 0x03)
ahcisata0 at pci0 dev 31 function 2: Intel 82801I Mobile AHCI SATA Controller 
with 4 ports
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: AHCI revision 1.2, 4 ports, 32 command slots, features 0xef22e0e0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: Intel 82801I SMBus Controller (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
Intel 82801I Thermal Controller (miscellaneous DASP, revision 0x03) at pci0 dev 
31 function 6 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
attimer1: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 8 ports with 8 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <WDC WD5000BEVT-60ZAT1>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp      DVDRAM GT30L, KZQ9C343835, mP04> cdrom 
removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
uvideo0 at uhub7 port 4 configuration 1 interface 0: SuYin HP Webcam-101, rev 
2.00/1.22, addr 2
video0 at uvideo0: SuYin HP Webcam-101, rev 2.00/1.22, addr 2
pad0: outputs: 44100Hz, 16-bit, stereo
audio2 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)