Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
weird ACPI error messages on Compaq laptop
I just got a new laptop, a "Hewlett-Packard Compaq Presario CQ71
Notebook PC (Rev 1)". I am installing NetBSD/amd64 5.0.1.
There are some funny things with it:
- Every 30 seconds or so there are some strange ACPI error messages:
ACPI Error (psargs-0464): [\_PR_.CPU0._PPC] Namespace lookup failure,
AE_NOT_FOUND
ACPI Error (psparse-0627): Method parse/execution failed [\CPUL] (Node
0xffff800007b26700), AE_NOT_FOUND
ACPI Error (psparse-0627): Method parse/execution failed [\_TZ_.TZ01.OTHD]
(Node 0xffff800007b26960), AE_NOT_FOUND
ACPI Error (psparse-0627): Method parse/execution failed [\_TZ_.TZ01._TMP]
(Node 0xffff800007b26a40), AE_NOT_FOUND
acpitz0: failed to evaluate _TMP
- X (the one that comes with the base system) doesn't handle the
graphics quite right.
- The mouse cursor is not arrow-shaped but there is some block of
random bits somewhere. Probably a mis-configured sprite.
- That block also doesn't move, which sounds like an incorrect mouse
device default, which I vaguely remember reading about.
- and the most obvious: printed text is also splattered all over the
place, as random black bits. Probably some font acceleration going
wrong.
The Xorg log file seems to suggest though that the chipset is
supported:
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43
...
(--) Chipset Mobile Intel® GM45 Express Chipset found
- The re0 is apparently some new revision. The MAC address isn't read
right and made all zeros. Despite that it works anyway. For now I put
a line in /etc/ifconfig.re0 to put in the MAC address as detected by
Xubuntu.
re0 at pci2 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe
10/100BaseTX (rev. 0x02)
re0: interrupting at ioapic0 pin 17
re0: Unknown revision (0x24c00000)
re0: Ethernet address 00:00:00:00:00:00
re0: using 256 tx descriptors
Xubunto appears to have none of these issues, so it should be possible
somehow to get around them :)
Below is the dmesg. The X log is rather long so I put it here:
http://www.falu.nl/~rhialto/Xorg.0.log
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.0.1 (GENERIC) #0: Thu Jul 30 00:08:07 UTC 2009
builds%b7.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-1-RELEASE/amd64/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/amd64/compile/GENERIC
total memory = 3998 MB
avail memory = 3861 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.4 @ 0xe8290 (26 entries)
Hewlett-Packard Compaq Presario CQ71 Notebook PC (Rev 1)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2095MHz, id 0x1067a
cpu1 at mainbus0 apid 1: Intel 686-class, 2095MHz, id 0x1067a
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000001>, AslId < ,01000013>
ACPI Error (evregion-0427): No handler for Region [ERAM] (0xffff800007b3aa80)
[EmbeddedControl] [20080321]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20080321]
ACPI Error (psparse-0627): Method parse/execution failed [\_SB_.PCI0._INI]
(Node 0xffff800007b43100), AE_NOT_EXIST
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff irq 0,8
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
attimer1 at acpi0 (TIMR, PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53
FWHD (INT0800) at acpi0 not configured
pckbc1 at acpi0 (KBC, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOUE, SYN1E08): aux port
pckbc2: irq 12
acpiec0 at acpi0 (EC0, PNP0C09-1): ACPI Embedded Controller
acpiec0: io 0x62,0x66
WMID (PNP0C14) at acpi0 not configured
acpitz0 at acpi0 (TZ01):ACPI Error (psargs-0464): [\_PR_.CPU0._PPC] Namespace
lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0627): Method parse/execution failed [\CPUL] (Node
0xffff800007b43700), AE_NOT_FOUND
ACPI Error (psparse-0627): Method parse/execution failed [\_TZ_.TZ01.OTHD]
(Node 0xffff800007b43960), AE_NOT_FOUND
ACPI Error (psparse-0627): Method parse/execution failed [\_TZ_.TZ01._TMP]
(Node 0xffff800007b43a40), AE_NOT_FOUND
critical 110.0C passive -273.-3C, passive cooling
ACPI Error (psargs-0464): [\_PR_.CPU0._PPC] Namespace lookup failure,
AE_NOT_FOUND
ACPI Error (psparse-0627): Method parse/execution failed [\CPUL] (Node
0xffff800007b43700), AE_NOT_FOUND
ACPI Error (psparse-0627): Method parse/execution failed [\_TZ_.TZ01.OTHD]
(Node 0xffff800007b43960), AE_NOT_FOUND
ACPI Error (psparse-0627): Method parse/execution failed [\_TZ_.TZ01._TMP]
(Node 0xffff800007b43a40), AE_NOT_FOUND
acpitz0: failed to evaluate _TMP
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.5
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2a40 (rev. 0x07)
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a42 (rev. 0x07)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 0x8086 product 0x2a43 (miscellaneous display, revision 0x07) at pci0 dev
2 function 1 not configured
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 19
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22
azalia0: host: 0x8086/0x293e (rev. 3), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x03)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x168c product 0x002b (miscellaneous network, revision 0x01) at pci1 dev
0 function 0 not configured
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2942 (rev. 0x03)
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe
10/100BaseTX (rev. 0x02)
re0: interrupting at ioapic0 pin 17
re0: Unknown revision (0x24c00000)
re0: Ethernet address 00:00:00:00:00:00
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 20
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 19
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 16
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 3: vendor 0x8086 product 0x2939 (rev. 0x03)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x03)
ehci1: interrupting at ioapic0 pin 20
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x93)
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x2919 (rev. 0x03)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2929
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: AHCI revision 1.2, 4 ports, 32 command slots, features 0xef22e0e0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
vendor 0x8086 product 0x2932 (miscellaneous DASP, revision 0x03) at pci0 dev 31
function 6 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
attimer1: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: 0x111d/0x7608 (rev. 2.2), HDA rev. 1.0
azalia0: codec[3]: 0x8086/0x2802 (rev. 0.0), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ACPI Error (psargs-0464): [\_PR_.CPU0._PPC] Namespace lookup failure,
AE_NOT_FOUND
ACPI Error (psparse-0627): Method parse/execution failed [\CPUL] (Node
0xffff800007b43700), AE_NOT_FOUND
ACPI Error (psparse-0627): Method parse/execution failed [\_TZ_.TZ01.OTHD]
(Node 0xffff800007b43960), AE_NOT_FOUND
ACPI Error (psparse-0627): Method parse/execution failed
[\_SB_.PCI0.LPC_.EC0_._Q80] (Node 0xffff800007b47aa0), AE_NOT_FOUND
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 8 ports with 8 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <WDC WD5000BEVT-60ZAT1>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
(using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp DVDRAM GT30L, KZQ9C343835, mP04> cdrom
removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
(using DMA)
uvideo0 at uhub7 port 4 configuration 1 interface 0: SuYin HP Webcam-101, rev
2.00/1.22, addr 2
video0 at uvideo0: SuYin HP Webcam-101, rev 2.00/1.22, addr 2
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Feb 7 16:31:13 savecore: no core dump
-Olaf.
--
___ Olaf 'Rhialto' Seibert -- You author it, and I'll reader it.
\X/ rhialto/at/xs4all.nl -- Cetero censeo "authored" delendum esse.
Home |
Main Index |
Thread Index |
Old Index