Re: port-atari/40315: Bootloader fails on Atarit TT030

["David Ross" <dross%pobox.com@localhost>]

The following reply was made to PR port-atari/40315; it has been noted by GNATS.

From: "David Ross" <dross%pobox.com@localhost>
To: <gnats-bugs%NetBSD.org@localhost>,
        <port-atari-maintainer%netbsd.org@localhost>,
        <gnats-admin%netbsd.org@localhost>,
        <netbsd-bugs%netbsd.org@localhost>
Cc: 
Subject: Re: port-atari/40315: Bootloader fails on Atarit TT030
Date: Sat, 3 Jan 2009 17:50:16 -0800

 Ok, I just tried an install onto a 512MB partition.  (After that there's 
 128MB of swap, then nothing else.)  I get the same result -- the bootloader 
 (presumably the first stage) just prints "Halting..." to the console and 
 dies.
 
 From http://netbsd.gw.com/cgi-bin/man-cgi?installboot+.atari+NetBSD-current:
 
      The bootstrap is split into three parts: a small first-stage program 
 that
      resides in the (physically) first 512 bytes on the device (as specified
      by Atari Corp.), a second-stage program that immediately follows the
      first-stage program, and a third-stage program that resides on the root
      filesystem.
 
 I know the second stage bootloader prints a banner, but I'm not seeing it 
 before the crash.  So it does seem that at this early stage in the boot 
 process, we're dealing with locations only very close to the beginning of 
 the disk.  In any case, my new install onto a 512MB partition demonstrates 
 that this bug is not caused by a 2GB firmware limit.
 
 David Ross
 dross%pobox.com@localhost
 
 
 ----- Original Message ----- 
 From: "Izumi Tsutsui" <tsutsui%ceres.dti.ne.jp@localhost>
 To: <port-atari-maintainer%netbsd.org@localhost>; 
<gnats-admin%netbsd.org@localhost>; 
 <netbsd-bugs%netbsd.org@localhost>; <dross%pobox.com@localhost>
 Sent: Saturday, January 03, 2009 12:15 PM
 Subject: Re: port-atari/40315: Bootloader fails on Atarit TT030
 
 
 > The following reply was made to PR port-atari/40315; it has been noted by 
 > GNATS.
 >
 > From: Izumi Tsutsui <tsutsui%ceres.dti.ne.jp@localhost>
 > To: dross%pobox.com@localhost
 > Cc: gnats-bugs%NetBSD.org@localhost, 
 > port-atari-maintainer%NetBSD.org@localhost,
 >        gnats-admin%NetBSD.org@localhost, netbsd-bugs%NetBSD.org@localhost,
 >        tsutsui%ceres.dti.ne.jp@localhost
 > Subject: Re: port-atari/40315: Bootloader fails on Atarit TT030
 > Date: Sun, 4 Jan 2009 05:11:47 +0900
 >
 > > It's not the firmware -- previously I had been running NetBSD 1.6.1 rock
 > > solid for months, with heavy disk activity.  During that time I never 
 > > had
 > > any boot issues or any issues that would indicate there's a 2GB limit.
 >
 > We have to confirm each possible problem in such case.
 >
 > "1.6.1 worked" doesn't mean firmware can read sectors beyond >2GB range.
 > If bootstrap files were stored in <2GB range in >2GB disk,
 > it just worked even if there was 2GB limit, and
 > IIRC the default partition sizes created by sysinst
 > were quite different between 1.6 and 4.0.
 >
 > Of course NetBSD kernel supports >2GB access (we have own drivers)
 > so once it booted properly it should work solid ~forever.
 >
 > If current bootloder doesn't work even with <2GB root partition,
 > it could be an evidence which indicates other problems.
 >
 > > If it would help, I can upload a disk image of a working 1.6.1 install, 
 > > same
 > > format as the HEAD disk image already included in this PR.  Then looking 
 > > at
 > > the differences between the two should help pinpoint the problem.
 >
 > I can't bunzip2 your HEAD image, as I wrote in the previous message.
 > Could you confirm it's valid?
 > ---
 > Izumi Tsutsui
 >
 >