Adaptec raid controller not working under NetBSD 6.0.1

[Achim Dirks <ad%xiqit.de@localhost>]

Hi,

i'm trying to install NetBSD 6.0.1 on an Computer with an Adaptec SCSI RAID 
controller (2020ZCR). Unfortunately the Controller is not recognized under 
NetBSD. Is this controller generally not supported or should it work? Dose 
anyone have an idea to get it running? Below is the dmesg.

Thanks in advance,
Achim

dmesg:
NetBSD 6.0 (GENERIC)
total memory = 2046 MB
avail memory = 1972 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Supermicro X7DB8 (0123456789)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Xeon(TM) CPU 2.66GHz, id 0xf64
cpu1 at mainbus0 apid 2: Intel(R) Xeon(TM) CPU 2.66GHz, id 0xf64
cpu2 at mainbus0 apid 1: Intel(R) Xeon(TM) CPU 2.66GHz, id 0xf64
cpu3 at mainbus0 apid 3: Intel(R) Xeon(TM) CPU 2.66GHz, id 0xf64
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 5: pa 0xfec80000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
MBRD (PNP0C02) at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
FWHD (INT0800) at acpi0 not configured
pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, PNP0F13) (aux port): irq 12
COM1 (PNP0501) at acpi0 not configured
COM2 (PNP0501) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
PRT (PNP0401) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x25d8 (rev. 0xb1)
ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x25f7 (rev. 0xb1)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x3500 (rev. 0x01)
ppb1: PCI Express 1.0 <Upstream Port of PCI-E Switch>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x3510 (rev. 0x01)
ppb2: PCI Express 1.0 <Downstream Port of PCI-E Switch>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci3 dev 0 function 0: vendor 0x8086 product 0x0329 (rev. 0x09)
ppb3: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x9005 product 0x0285 (RAID mass storage, revision 0x02) at pci4 dev 1 
function 0 not configured
ppb4 at pci3 dev 0 function 2: vendor 0x8086 product 0x032a (rev. 0x09)
ppb4: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci2 dev 2 function 0: vendor 0x8086 product 0x3518 (rev. 0x01)
ppb5: PCI Express 1.0 <Downstream Port of PCI-E Switch>
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci6 dev 0 function 0: i80003 dual 1000baseT Ethernet (rev. 0x01)
wm0: interrupting at ioapic0 pin 18
wm0: PCI-Express bus
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:30:48:34:f8:fa
ikphy0 at wm0 phy 1: i82563 10/100/1000 media interface, rev. 2
ikphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
wm1 at pci6 dev 0 function 1: i80003 dual 1000baseT Ethernet (rev. 0x01)
wm1: interrupting at ioapic0 pin 19
wm1: PCI-Express bus
wm1: 65536 word (16 address bits) SPI EEPROM
wm1: Ethernet address 00:30:48:34:f8:fb
ikphy1 at wm1 phy 1: i82563 10/100/1000 media interface, rev. 2
ikphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb6 at pci1 dev 0 function 3: vendor 0x8086 product 0x350c (rev. 0x01)
ppb6: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci7 dev 1 function 0: vendor 0x12d8 product 0x01a7 (rev. 0x01)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
wm2 at pci8 dev 4 function 0: i82546GB quad-port Gigabit Ethernet (KSP3) (rev. 
0x03)
wm2: interrupting at ioapic1 pin 0
wm2: 64-bit 133MHz PCIX bus
wm2: 256 word (8 address bits) MicroWire EEPROM
wm2: Ethernet address 90:e2:ba:27:81:fc
makphy0 at wm2 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
wm3 at pci8 dev 4 function 1: i82546GB quad-port Gigabit Ethernet (KSP3) (rev. 
0x03)
wm3: interrupting at ioapic1 pin 1
wm3: 64-bit 133MHz PCIX bus
wm3: 256 word (8 address bits) MicroWire EEPROM
wm3: Ethernet address 90:e2:ba:27:81:fd
makphy1 at wm3 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
wm4 at pci8 dev 6 function 0: i82546GB quad-port Gigabit Ethernet (KSP3) (rev. 
0x03)
wm4: interrupting at ioapic1 pin 2
wm4: 64-bit 133MHz PCIX bus
wm4: 256 word (8 address bits) MicroWire EEPROM
wm4: Ethernet address 90:e2:ba:27:81:fe
makphy2 at wm4 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5
makphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
wm5 at pci8 dev 6 function 1: i82546GB quad-port Gigabit Ethernet (KSP3) (rev. 
0x03)
wm5: interrupting at ioapic1 pin 3
wm5: 64-bit 133MHz PCIX bus
wm5: 256 word (8 address bits) MicroWire EEPROM
wm5: Ethernet address 90:e2:ba:27:81:ff
makphy3 at wm5 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5
makphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb8 at pci0 dev 4 function 0: vendor 0x8086 product 0x25f8 (rev. 0xb1)
ppb8: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci0 dev 6 function 0: vendor 0x8086 product 0x25f9 (rev. 0xb1)
ppb9: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x1a38 (miscellaneous system, revision 0xb1) at pci0 dev 
8 function 0 not configured
pchb1 at pci0 dev 16 function 0: vendor 0x8086 product 0x25f0 (rev. 0xb1)
pchb2 at pci0 dev 16 function 1: vendor 0x8086 product 0x25f0 (rev. 0xb1)
pchb3 at pci0 dev 16 function 2: vendor 0x8086 product 0x25f0 (rev. 0xb1)
pchb4 at pci0 dev 17 function 0: vendor 0x8086 product 0x25f1 (rev. 0xb1)
pchb5 at pci0 dev 19 function 0: vendor 0x8086 product 0x25f3 (rev. 0xb1)
pchb6 at pci0 dev 21 function 0: vendor 0x8086 product 0x25f5 (rev. 0xb1)
pchb7 at pci0 dev 22 function 0: vendor 0x8086 product 0x25f6 (rev. 0xb1)
ppb10 at pci0 dev 28 function 0: vendor 0x8086 product 0x2690 (rev. 0x09)
ppb10: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci11 at ppb10 bus 11
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2688 (rev. 0x09)
uhci0: interrupting at ioapic0 pin 17
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2689 (rev. 0x09)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x268a (rev. 0x09)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x268c (rev. 0x09)
ehci0: interrupting at ioapic0 pin 17
ehci0: BIOS refuses to give up ownership, using force
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb11 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd9)
pci12 at ppb11 bus 12
pci12: i/o space, memory space enabled
vga0 at pci12 dev 1 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI ES1000 RN50
radeondrm0: Initialized radeon 1.29.0 20080613
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2670 (rev. 0x09)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 631xESB/632xESB IDE Controller (rev. 
0x09)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x269b (rev. 0x09)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
ERROR: 528 cycle TSC drift observed
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <TSSTcorpDVD-ROM SH-D162D, , SB00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus0 drive 0
wd0: <WDC WD1600BB-00FTA0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA)
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: iTE Tech USB Mass Storage Device, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Verbatim, USB  Disk 2.0, 0.00> disk removable
sd0: 3854 MB, 500 cyl, 8 head, 32 sec, 512 bytes/sect x 7892992 sectors
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: cd0
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: vendor 0x046a product 0x0001, rev 1.00/9.08, addr 2, iclass 3/1
ukbd0 at uhidev0
root on cd0a dumps on cd0b
root file system type: cd9660
wskbd0 at ukbd0: console keyboard, using wsdisplay0
warning: no /dev/console