sound in NetBSD?

["Nino on NetBSD 4.0" <nbsdold%gmx.net@localhost>]

Dear All,

Besides the beeping of vi, I'd love to have sound in NetBSD. This has been an 
issue already for several years, and on some other machines of older type I 
have it, but not on my main machine. Is there anything that could be done in 
this matter? In FreeBSD 7, by the way, it works. 

In my dmesg (full dmesg see below) I see these two lines:

auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
auich0: can't map interrupt

Is there anything I can do about this, or do I have to... learn to live without 
it?

Thank you in advance for your kind help.

I am, by the way, using NetBSD ___5___, not 4, eventhough it is written in my 
e-mail address.

- Nino



DMESG OF NETBSD 5:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0 (GENERIC) #0: Sun Apr 26 18:50:08 UTC 2009
        
builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-RELEASE/i386/200904260229Z-obj/home/builds/ab/netbsd-5-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 957 MB
avail memory = 929 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Acer, inc. Aspire 3630      (Not Applicable)
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 1600MHz, id 0x6d8
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1039 product 0x0661 (rev. 0x11)
agp0 at pchb0: aperture at 0xe0000000, size 0x2000000
ppb0 at pci0 dev 1 function 0: vendor 0x1039 product 0x0003 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1039 product 0x6330 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
pcib0 at pci0 dev 2 function 0
pcib0: vendor 0x1039 product 0x0008 (rev. 0x25)
siside0 at pci0 dev 2 function 5
siside0: Silicon Integrated Systems 96X UDMA6661 IDE controller (rev. 0x00)
siside0: bus-master DMA support present
siside0: primary channel configured to compatibility mode
siside0: primary channel interrupting at irq 14
atabus0 at siside0 channel 0
siside0: secondary channel configured to compatibility mode
siside0: secondary channel interrupting at irq 15
atabus1 at siside0 channel 1
vendor 0x1039 product 0x7013 (modem communications, revision 0xa0) at pci0 dev 
2 function 6 not configured
auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
pci_intr_map: no mapping for pin C (line=ff)
auich0: can't map interrupt
ohci0 at pci0 dev 3 function 0: vendor 0x1039 product 0x7001 (rev. 0x0f)
ohci0: interrupting at irq 9
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 3 function 1: vendor 0x1039 product 0x7001 (rev. 0x0f)
ohci1: interrupting at irq 11
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 3 function 3: vendor 0x1039 product 0x7002 (rev. 0x00)
ehci0: interrupting at irq 10
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
sip0 at pci0 dev 4 function 0: SiS 900 10/100 Ethernet, rev 0x91
sip0: interrupting at irq 5
sip0: Ethernet address 00:16:36:3c:47:e0
rlphy0 at sip0 phy 13: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0 at pci0 dev 6 function 0: vendor 0x1524 product 0x1410 (rev. 0x01)
ath0 at pci0 dev 11 function 0cannot map register space
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Up/down buttons, Palm detect, Multi-finger
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
attimer0: attached to pcppi0
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x24000
pci_intr_map: no mapping for pin A (line=ff)
cbb0: couldn't map interrupt
cardslot0 at cbb0
cardbus0 at cardslot0: bus 2
pcmcia0 at cardslot0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <Slimtype DVDRW SSW-8015S, , HRS2> cdrom removable
uhub0 at usb0: vendor 0x1039 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x1039 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 0x1039 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
umass0 at uhub2 port 4 configuration 1 interface 0
umass0: SMI Corporation USB DISK, rev 2.00/11.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <S31B0808, USB DISK, 1100> disk removable
sd0: 1960 MB, 3936 cyl, 16 head, 63 sec, 512 bytes/sect x 4014080 sectors
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
-- 
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01