Re: Mouse Not working on NetBSD 5.0.x(1,2)

[Sujit K M <sjt.kar%gmail.com@localhost>]

Kindly find attached the dmesg and uname logs. I have not created logs
for dmesg before and
after X -configure and X -config xorg.conf.new. As after running I
didnot find any update to the
dmesg log. Looking for some useful tips.

There was another issue that I have seen. It is that the NetBSD boot
at times fails and the system
reboots. I could not replicate this.

Regards,


On Mon, Aug 23, 2010 at 6:31 PM, Sujit K M <sjt.kar%gmail.com@localhost> wrote:
> Hi,
>
> X11 is not working on NetBSD AMD Core 2 Duo Processor. This is what I
> have done till now,
> 1. Burned an Boot CD.
> 2. Installed NetBSD on my Machine(It dual boots with Fedora12 and FreeBSD).
> 3. Put wscons=Yes(Infact tried it with /etc/wscons.conf) and
> wsmoused=YES(in rc.conf both)
> 4. Run X -configure.
> 5. Run X -config xorg.conf.new.
>
>
> I found the following things wrong in the xorg.conf.new
> The driver is named as mouse(seems to be wsmouse in documentation) and
> the file is /dev/mouse
> (seems to be /dev/wsmouse in documentation).
>
> I was trying to find a solution, I checked the /usr directory and
> found X11R6 as well as
> X11R7(is it because of this). Also I did an ls -lh /dev/mouse(does not
> exist) and ls -lh /dev/wsmouse
> (exists).
>
> I was just trying to see whether I will be able to fix the issue. It
> is an ps2 mouse. Any inputs are welcome.
>
> Regards,
>
> --
> -- Sujit K M
>
> blog(http://kmsujit.blogspot.com/)
>



-- 
-- Sujit K M

blog(http://kmsujit.blogspot.com/)

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0.1 (GENERIC) #0: Thu Jul 30 00:08:07 UTC 2009
        
builds%b7.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-1-RELEASE/amd64/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/amd64/compile/GENERIC
total memory = 2035 MB
avail memory = 1957 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.4 @ 0xe8170 (42 entries)
                                                                    (           
                      )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2533MHz, id 0x10676
cpu1 at mainbus0 apid 1: Intel 686-class, 2533MHz, id 0x10676
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId < INTEL,  DG31PR,06222004>, AslId <MSFT,00010013>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03): aux port
pckbc2: irq 12
FDC (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x29c0 (rev. 0x10)
agp0 at pchb0: detected 7164k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x29c1 (rev. 0x10)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x29c2 (rev. 0x10)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at vga0 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 16
azalia0: host: 0x8086/0x27d8 (rev. 1), HDA rev. 1.0
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x01)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168B/8111B PCIe Gigabit Ethernet (rev. 
0x01)
re0: interrupting at ioapic0 pin 17
re0: Ethernet address 00:1c:c0:5c:41:f9
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x01)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
ral0 at pci4 dev 5 function 0: vendor 0x1814 product 0x0302 (rev. 0x00)
ral0: interrupting at ioapic0 pin 20
ral0: 802.11 address 00:1e:58:b3:0b:ad
ral0: MAC/BBP RT2561C, RF RT2527
ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 
36Mbps 48Mbps 54Mbps
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x27b8 (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x01)
ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[2]: Realtek ALC888 (rev. 0.1), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
wd0 at atabus0 drive 0: <ST3160215AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 1: <TSSTcorp CDDVDW SH-S203B, , SB03> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

NetBSD . 5.0.1 NetBSD 5.0.1 (GENERIC) #0: Thu Jul 30 00:08:07 UTC 2009  
builds%b7.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-1-RELEASE/amd64/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/amd64/compile/GENERIC
 amd64