Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: does wpa_supplicant work in current?
On 30 Dec 2008, at 15:09, Arnaud Lacombe wrote:
On Tue, Dec 30, 2008 at 5:05 AM, Mark Kirby <mark%fishladder.co.uk@localhost>
wrote:
HI,
My laptop has been trying to connect to my time capsule for over 8
hours
now. This used to work before i updated to current, has anybody
else seen
this?
Thanks
Did you try running wpa_supplicant from command line and enable debug
information ?
yes i did.
I get the following in an endless loop
# wpa_supplicant -i rum0 -d -c /etc/wpa_supplicant.conf
Initializing interface 'rum0' conf '/etc/wpa_supplicant.conf' driver
'default' ctrl_interface 'N/A' bridge 'N/A'
Reading configuration file '/etc/wpa_supplicant.conf'
Priority group 0
id=0 ssid='ooga_booga'
Initializing interface (2) 'rum0'
Own MAC address: 00:21:29:e5:9f:7e
wpa_driver_bsd_set_wpa: enabled=1
wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_set_countermeasures: enabled=0
wpa_driver_bsd_set_drop_unencrypted: enabled=1
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Added interface rum0
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=10):
6f 6f 67 61 5f 62 6f 6f 67 61 ooga_booga
Trying to get current scan results first without requesting a new scan
to speed up initial association
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
RTM_IFINFO: Interface 'rum0' UP
EAPOL: disable timer tick
RTM_IEEE80211: scan result (105)
Received 148 bytes of scan results (2 BSSes)
Scan results: 2
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:1e:52:f5:0b:49 ssid='ooga_booga' wpa_ie_len=22 rsn_ie_len=0
caps=0x31
selected based on WPA IE
selected WPA AP 00:1e:52:f5:0b:49 ssid='ooga_booga'
Trying to associate with 00:1e:52:f5:0b:49 (SSID='ooga_booga'
freq=2427 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: SCANNING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'ooga_booga' wpa ie len 24 pairwise 2
group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
ioctl[SIOCS80211, op 21, len 42]: Invalid argument
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_IEEE80211: scan result (105)
Received 148 bytes of scan results (2 BSSes)
Scan results: 2
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:1e:52:f5:0b:49 ssid='ooga_booga' wpa_ie_len=22 rsn_ie_len=0
caps=0x31
selected based on WPA IE
selected WPA AP 00:1e:52:f5:0b:49 ssid='ooga_booga'
Already associated with the selected AP (3)
Authentication with 00:1e:52:f5:0b:49 timed out.
Added BSSID 00:1e:52:f5:0b:49 into blacklist
No keys have been configured - skip key clearing
State: ASSOCIATING -> DISCONNECTED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=10):
6f 6f 67 61 5f 62 6f 6f 67 61 ooga_booga
RTM_IEEE80211: scan result (105)
Received 148 bytes of scan results (2 BSSes)
Scan results: 2
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:1e:52:f5:0b:49 ssid='ooga_booga' wpa_ie_len=22 rsn_ie_len=0
caps=0x31
selected based on WPA IE
selected WPA AP 00:1e:52:f5:0b:49 ssid='ooga_booga'
Trying to associate with 00:1e:52:f5:0b:49 (SSID='ooga_booga'
freq=2427 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: SCANNING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'ooga_booga' wpa ie len 24 pairwise 2
group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
ioctl[SIOCS80211, op 21, len 42]: Invalid argument
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_IEEE80211: scan result (105)
Received 148 bytes of scan results (2 BSSes)
Scan results: 2
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:1e:52:f5:0b:49 ssid='ooga_booga' wpa_ie_len=22 rsn_ie_len=0
caps=0x31
selected based on WPA IE
selected WPA AP 00:1e:52:f5:0b:49 ssid='ooga_booga'
Already associated with the selected AP (3)
Authentication with 00:1e:52:f5:0b:49 timed out.
BSSID 00:1e:52:f5:0b:49 blacklist count incremented to 2
No keys have been configured - skip key clearing
State: ASSOCIATING -> DISCONNECTED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
RTM_IEEE80211: scan result (105)
Received 148 bytes of scan results (2 BSSes)
Scan results: 2
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:1e:52:f5:0b:49 ssid='ooga_booga' wpa_ie_len=22 rsn_ie_len=0
caps=0x31
skip - blacklisted
1: 00:c0:49:da:5a:71 ssid='USR2249' wpa_ie_len=0 rsn_ie_len=0 caps=0x41
skip - no WPA/RSN IE
Try to find non-WPA AP
0: 00:1e:52:f5:0b:49 ssid='ooga_booga' wpa_ie_len=22 rsn_ie_len=0
caps=0x31
skip - blacklisted
1: 00:c0:49:da:5a:71 ssid='USR2249' wpa_ie_len=0 rsn_ie_len=0 caps=0x41
skip - SSID mismatch
No APs found - clear blacklist and try again
Removed BSSID 00:1e:52:f5:0b:49 from blacklist (clear)
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:1e:52:f5:0b:49 ssid='ooga_booga' wpa_ie_len=22 rsn_ie_len=0
caps=0x31
selected based on WPA IE
selected WPA AP 00:1e:52:f5:0b:49 ssid='ooga_booga'
Trying to associate with 00:1e:52:f5:0b:49 (SSID='ooga_booga'
freq=2427 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: SCANNING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'ooga_booga' wpa ie len 24 pairwise 2
group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
ioctl[SIOCS80211, op 21, len 42]: Invalid argument
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_IEEE80211: scan result (105)
Received 100 bytes of scan results (1 BSSes)
Scan results: 1
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:1e:52:f5:0b:49 ssid='ooga_booga' wpa_ie_len=22 rsn_ie_len=0
caps=0x31
selected based on WPA IE
selected WPA AP 00:1e:52:f5:0b:49 ssid='ooga_booga'
Already associated with the selected AP (3)
Authentication with 00:1e:52:f5:0b:49 timed out.
Added BSSID 00:1e:52:f5:0b:49 into blacklist
No keys have been configured - skip key clearing
State: ASSOCIATING -> DISCONNECTED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=10):
6f 6f 67 61 5f 62 6f 6f 67 61 ooga_booga
^CCTRL-EVENT-TERMINATING - signal 2 received
Removing interface rum0
State: SCANNING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_bsd_set_wpa: enabled=0
wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0
wpa_driver_bsd_set_drop_unencrypted: enabled=0
wpa_driver_bsd_set_countermeasures: enabled=0
No keys have been configured - skip key clearing
Removed BSSID 00:1e:52:f5:0b:49 from blacklist (clear)
Cancelling scan request
Cancelling authentication timeout
wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0
don't know what that all means but i did notice i cant do anything
with the output as when trying to redirect to a file all i get is
ioctl[SIOCS80211, op 21, len 42]: Invalid argument
dont know if that has anything to do with it.
Mark
Home |
Main Index |
Thread Index |
Old Index