Hello, Looking at manpages to learn how to configure edge motion, I saw that the touchpad from my Eee PC 900 is not recognised as a synaptics one. On my Eee PC 701, the touchpad is recognised as a synaptics touchpad. I found here (http://wiki.debian.org/DebianEeePC/Model/900#head-2893956846a0aecb8407e10d13cf4e50b2ef0357) that a patch needs to be applied to the Debian Linux kernel for the touchpad to be recognized as a synaptics one. Should NetBSD's pms(4) sources be modified to recognise the 900's touchpad ? TIA, Jo PS: I've attached the dmesg in case it helps.
NetBSD 4.99.72 (TUMFATIG) #1: Sun Aug 24 22:26:20 CEST 2008 root%pak.tumfatig.net@localhost:/usr/src/sys/arch/i386/compile/TUMFATIG total memory = 2039 MB avail memory = 1992 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 ASUSTeK Computer INC. 900 (0501) mainbus0 (root) cpu0 at mainbus0 apid 0: Intel 686-class, 900MHz, id 0x6d8 cpu0: Intel(R) On Demand Clock Modulation (state disabled) ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins acpi0 at mainbus0: Intel ACPICA 20080321 acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,07000807>, AslId <MSFT,00000097> acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 ACPI-Safe 24-bit timer attimer1 at acpi0 (TMR, PNP0100): AT Timer attimer1: io 0x40-0x43 irq 0 pckbc1 at acpi0 (PS2K, PNP0303): kbd port pckbc1: io 0x60,0x64 irq 1 pckbc2 at acpi0 (PS2M, SYN0A00): aux port pckbc2: irq 12 pcppi1 at acpi0 (SPKR, PNP0800) pcppi1: io 0x61 midi0 at pcppi1: PC speaker (CPU-intensive output) sysbeep0 at pcppi1 npx1 at acpi0 (COPR, PNP0C04) npx1: io 0xf0-0xff irq 13 npx1: reported by CPUID; using exception 16 acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller acpiec0: io 0x62,0x66 acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method) acpibat0: battery info: ASUS, LION, 900 acpiacad0 at acpi0 (AC0, ACPI0003): ACPI AC Adapter asus0 at acpi0 (ATKD, ASUS010-16843008) acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button acpitz0 at acpi0 (TZ00): critical 90.0C, passive cooling apm0 at acpi0: Power Management spec V1.2 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: vendor 0x8086 product 0x2590 (rev. 0x04) pchb0: returns constant 0xff stream, RNG disabled. agp0 at pchb0: detected 7932k stolen memory agp0: aperture at 0xd0000000, size 0x10000000 vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2592 (rev. 0x04) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 i915drm0 at vga1: Intel i915GM (unit 0) i915drm0: AGP at 0xd0000000 256MB i915drm0: Initialized i915 1.5.0 20060119 vendor 0x8086 product 0x2792 (miscellaneous display, revision 0x04) at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller azalia0: interrupting at ioapic0 pin 16 azalia0: host: 0x8086/0x2668 (rev. 4), HDA rev. 1.0 ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x04) pci1 at ppb0 bus 4 pci1: no spaces enabled! ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2662 (rev. 0x04) pci2 at ppb1 bus 3 pci2: memory space enabled, rd/line, wr/inv ok lii0 at pci2 dev 0 function 0: Attansic/Atheros L2 Fast Ethernet lii0: Ethernet address 00:22:15:02:48:6d lii0: interrupting at ioapic0 pin 17 ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface ukphy0: OUI 0x00c82e, model 0x0002, rev. 2 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2664 (rev. 0x04) pci3 at ppb2 bus 1 pci3: memory space enabled, rd/line, wr/inv ok ath0 at pci3 dev 0 function 0 ath0: interrupting at ioapic0 pin 18 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 14.2 phy 7.0 radio 10.2 uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x04) uhci0: interrupting at ioapic0 pin 23 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x04) uhci1: interrupting at ioapic0 pin 19 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x04) uhci2: interrupting at ioapic0 pin 18 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x04) uhci3: interrupting at ioapic0 pin 16 usb3 at uhci3: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x04) ehci0: interrupting at ioapic0 pin 23 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd4) pci4 at ppb3 bus 5 pci4: no spaces enabled! pcib0 at pci0 dev 31 function 0 pcib0: vendor 0x8086 product 0x2641 (rev. 0x04) piixide0 at pci0 dev 31 function 2 piixide0: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x04) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev. 0x04) ichsmb0: interrupting at ioapic0 pin 19 iic0 at ichsmb0: I2C bus isa0 at pcib0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 acpiacad0: AC adapter online. wd0 at atabus1 drive 0azalia0: codec[0]: Realtek ALC662-GR (rev. 1.1), HDA rev. 1.0 audio0 at azalia0: full duplex, independent : <ASUS-PHISON OB SSD> wd0: drive supports 1-sector PIO transfers, LBA addressing wd0: 3847 MB, 7818 cyl, 16 head, 63 sec, 512 bytes/sect x 7880544 sectors uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) wd1 at atabus1 drive 1: <ASUS-PHISON SSD> wd1: drive supports 1-sector PIO transfers, LBA addressing wd1: 7695 MB, 15636 cyl, 16 head, 63 sec, 512 bytes/sect x 15761088 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) wd1(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) umass0 at uhub4 port 5 configuration 1 interface 0 umass0: ENE UB6225, rev 2.00/1.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <USB2.0, CardReader SD0, 0100> disk removable sd0: drive offline sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0: unable to open device, error = 19 Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs uhidev0 at uhub0 port 2 configuration 1 interface 0 uhidev0: vendor 0x0461 USB Optical Mouse, rev 2.00/2.00, addr 2, iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse1 at ums0 mux 0 wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) i915drm0: interrupting at ioapic0 pin 16 umass1 at uhub4 port 3 configuration 1 interface 0 umass1: vendor 0x05e3 USB TO IDE, rev 2.00/0.33, addr 3 umass1: using SCSI over Bulk-Only scsibus1 at umass1: 2 targets, 1 lun per target sd1 at scsibus1 target 0 lun 0: <SAMSUNG, HM100JC, 0811> disk fixed sd1: fabricating a geometry sd1: 95396 MB, 95396 cyl, 64 head, 32 sec, 512 bytes/sect x 195371568 sectors sd1: fabricating a geometry sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present /mnt/usb: replaying log to disk uhidev0: at uhub0 port 2 (addr 2) disconnected wsmouse1: detached ums0: detached uhidev0: detached umass2 at uhub4 port 2 configuration 1 interface 0 umass2: Prolific Technology Inc. Mass Storage Device, rev 2.00/1.00, addr 4 umass2: using SCSI over Bulk-Only scsibus2 at umass2: 2 targets, 1 lun per target cd0 at scsibus2 target 0 lun 0: <Optiarc, DVD RW AD-5590A, 1.01> cdrom removable cd0(umass2:0:0:0): Check Condition on CDB: 0x43 00 00 00 00 00 00 00 0c 40 SENSE KEY: Illegal Request ASC/ASCQ: Illegal Field in CDB SKSV: Error in CDB, Offset 9 cd0(umass2:0:0:0): Check Condition on CDB: 0x28 00 00 00 00 00 00 00 01 00 SENSE KEY: Illegal Request ASC/ASCQ: Illegal Mode For This Track cd0: dos partition I/O error cd0(umass2:0:0:0): Check Condition on CDB: 0x43 00 00 00 00 00 00 00 0c 40 SENSE KEY: Illegal Request ASC/ASCQ: Illegal Field in CDB SKSV: Error in CDB, Offset 9 umass2: at uhub4 port 2 (addr 4) disconnected cd0: detached scsibus2: detached umass2: detached uhidev0 at uhub0 port 2 configuration 1 interface 0 uhidev0: vendor 0x0461 USB Optical Mouse, rev 2.00/2.00, addr 2, iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse1 at ums0 mux 0 uid 2000, pid 4604, command uudeview, on /tmp: file system full uid 2000, pid 576, command uudeview, on /tmp: file system full uid 2000, pid 1799, command uudeview, on /tmp: file system full uid 2000, pid 1991, command uudeview, on /tmp: file system full uid 2000, pid 653, command uudeview, on /tmp: file system full uid 2000, pid 2447, command uudeview, on /tmp: file system full uid 2000, pid 1550, command uudeview, on /tmp: file system full sd1(umass1:0:0:0): Check Condition on CDB: 0x28 00 04 06 44 bf 00 00 80 00 SENSE KEY: Hardware Error ASC/ASCQ: Data Phase Error sd1(umass1:0:0:0): Check Condition on CDB: 0x28 00 04 0b f2 bf 00 00 80 00 SENSE KEY: Hardware Error ASC/ASCQ: Data Phase Error uhidev0: at uhub0 port 2 (addr 2) disconnected wsmouse1: detached ums0: detached uhidev0: detached umass2 at uhub4 port 2 configuration 1 interface 0 umass2: SanDisk SDDR-113, rev 2.00/94.12, addr 4 umass2: using SCSI over Bulk-Only scsibus2 at umass2: 2 targets, 1 lun per target sd2 at scsibus2 target 0 lun 0: <SanDisk, SDDR-113, 9412> disk removable sd2: fabricating a geometry sd2: 15326 MB, 15326 cyl, 64 head, 32 sec, 512 bytes/sect x 31388672 sectors sd2: fabricating a geometry umass2: at uhub4 port 2 (addr 4) disconnected sd2: detached scsibus2: detached umass2: detached uhidev0 at uhub0 port 2 configuration 1 interface 0 uhidev0: vendor 0x0461 USB Optical Mouse, rev 2.00/2.00, addr 2, iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse1 at ums0 mux 0 acpi0: entering state 3 Flushing disk caches: 6 3 3 3 3 3 1 done ioapic0 reenabling umass0: at uhub4 port 5 (addr 2) disconnected uhidev0: at uhub0 port 2 (addr 2) disconnected acpibat0: battery info: ASUS, LION, 900 wd0a: channel reset reading fsbn 7421440 of 7421440-7421471 (wd0 bn 7421503; cn 7362 tn 9 sn 40), retrying sd0: detached scsibus0: detached umass0: detached wsmouse1: detached ums0: detached uhidev0: detached wd0: soft error (corrected) umass0 at uhub4 port 5 configuration 1 interface 0 umass0: ENE UB6225, rev 2.00/1.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <USB2.0, CardReader SD0, 0100> disk removable sd0: drive offline sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0: unable to open device, error = 19 uhidev0 at uhub0 port 2 configuration 1 interface 0 uhidev0: vendor 0x0461 USB Optical Mouse, rev 2.00/2.00, addr 2, iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse1 at ums0 mux 0 i915drm0: interrupting at ioapic0 pin 16 acpi0: entering state 3 Flushing disk caches: 5 2 2 2 2 2 2 2 done ioapic0 reenabling umass0: at uhub4 port 5 (addr 2) disconnected wd1e: channel reset writing fsbn 2626912 of 2626912-2626943 (wd1 bn 2626975; cn 2606 tn 2 sn 1), retrying sd0: detached scsibus0: detached umass0: detached acpibat0: battery info: ASUS, LION, 900 wd1: soft error (corrected) umass0 at uhub4 port 5 configuration 1 interface 0 umass0: ENE UB6225, rev 2.00/1.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <USB2.0, CardReader SD0, 0100> disk removable sd0: drive offline sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0: unable to open device, error = 19 i915drm0: interrupting at ioapic0 pin 16 acpi0: entering state 3 Flushing disk caches: 5 5 done ioapic0 reenabling umass0: at uhub4 port 5 (addr 2) disconnected acpibat0: battery info: ASUS, LION, 900 sd0: detached scsibus0: detached umass0: detached umass0 at uhub4 port 5 configuration 1 interface 0 umass0: ENE UB6225, rev 2.00/1.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <USB2.0, CardReader SD0, 0100> disk removable sd0: drive offline sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0: unable to open device, error = 19 i915drm0: interrupting at ioapic0 pin 16 i915drm0: interrupting at ioapic0 pin 16 i915drm0: interrupting at ioapic0 pin 16 info: [drm] had to remove pid 3466 still in file list i915drm0: interrupting at ioapic0 pin 16 acpi0: entering state 3 Flushing disk caches: 7 4 4 done ioapic0 reenabling umass0: at uhub4 port 5 (addr 2) disconnected acpibat0: battery info: ASUS, LION, 900 sd0: detached scsibus0: detached umass0: detached umass0 at uhub4 port 5 configuration 1 interface 0 umass0: ENE UB6225, rev 2.00/1.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <USB2.0, CardReader SD0, 0100> disk removable sd0: drive offline sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0: unable to open device, error = 19 i915drm0: interrupting at ioapic0 pin 16 uhidev0: at uhub0 port 2 (addr 2) disconnected wsmouse1: detached ums0: detached uhidev0: detached uaudio0 at uhub0 port 2 configuration 1 interface 0: Burr-Brown from TI USB Audio DAC, rev 1.10/1.00, addr 2 uaudio0: audio rev 1.00 audio2 at uaudio0: full duplex, independent uhidev0 at uhub0 port 2 configuration 1 interface 2 uhidev0: Burr-Brown from TI USB Audio DAC, rev 1.10/1.00, addr 2, iclass 3/0 uhid0 at uhidev0: input=1, output=0, feature=0 uvm_fault(0xc0b572c0, 0xcdcab000, 1) -> 0xe fatal page fault in supervisor mode trap type 6 code 0 eip c04baae5 cs 8 eflags 10292 cr2 cdcab039 ilevel 0 syncing disks... 5 4 4 1 done unmounting file systems...Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.72 (TUMFATIG) #1: Sun Aug 24 22:26:20 CEST 2008 root%pak.tumfatig.net@localhost:/usr/src/sys/arch/i386/compile/TUMFATIG total memory = 2039 MB avail memory = 1992 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 ASUSTeK Computer INC. 900 (0501) mainbus0 (root) cpu0 at mainbus0 apid 0: Intel 686-class, 900MHz, id 0x6d8 cpu0: Intel(R) On Demand Clock Modulation (state disabled) ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins acpi0 at mainbus0: Intel ACPICA 20080321 acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,07000807>, AslId <MSFT,00000097> acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 ACPI-Safe 24-bit timer attimer1 at acpi0 (TMR, PNP0100): AT Timer attimer1: io 0x40-0x43 irq 0 pckbc1 at acpi0 (PS2K, PNP0303): kbd port pckbc1: io 0x60,0x64 irq 1 pckbc2 at acpi0 (PS2M, SYN0A00): aux port pckbc2: irq 12 pcppi1 at acpi0 (SPKR, PNP0800) pcppi1: io 0x61 midi0 at pcppi1: PC speaker (CPU-intensive output) sysbeep0 at pcppi1 npx1 at acpi0 (COPR, PNP0C04) npx1: io 0xf0-0xff irq 13 npx1: reported by CPUID; using exception 16 acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller acpiec0: io 0x62,0x66 acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method) acpibat0: battery info: ASUS, LION, 900 acpiacad0 at acpi0 (AC0, ACPI0003): ACPI AC Adapter asus0 at acpi0 (ATKD, ASUS010-16843008) acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button acpitz0 at acpi0 (TZ00): critical 90.0C, passive cooling apm0 at acpi0: Power Management spec V1.2 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: vendor 0x8086 product 0x2590 (rev. 0x04) pchb0: returns constant 0xff stream, RNG disabled. agp0 at pchb0: detected 7932k stolen memory agp0: aperture at 0xd0000000, size 0x10000000 vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2592 (rev. 0x04) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 i915drm0 at vga1: Intel i915GM (unit 0) i915drm0: AGP at 0xd0000000 256MB i915drm0: Initialized i915 1.5.0 20060119 vendor 0x8086 product 0x2792 (miscellaneous display, revision 0x04) at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller azalia0: interrupting at ioapic0 pin 16 azalia0: host: 0x8086/0x2668 (rev. 4), HDA rev. 1.0 ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x04) pci1 at ppb0 bus 4 pci1: no spaces enabled! ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2662 (rev. 0x04) pci2 at ppb1 bus 3 pci2: memory space enabled, rd/line, wr/inv ok lii0 at pci2 dev 0 function 0: Attansic/Atheros L2 Fast Ethernet lii0: Ethernet address 00:22:15:02:48:6d lii0: interrupting at ioapic0 pin 17 ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface ukphy0: OUI 0x00c82e, model 0x0002, rev. 2 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2664 (rev. 0x04) pci3 at ppb2 bus 1 pci3: memory space enabled, rd/line, wr/inv ok ath0 at pci3 dev 0 function 0 ath0: interrupting at ioapic0 pin 18 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 14.2 phy 7.0 radio 10.2 uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x04) uhci0: interrupting at ioapic0 pin 23 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x04) uhci1: interrupting at ioapic0 pin 19 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x04) uhci2: interrupting at ioapic0 pin 18 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x04) uhci3: interrupting at ioapic0 pin 16 usb3 at uhci3: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x04) ehci0: interrupting at ioapic0 pin 23 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd4) pci4 at ppb3 bus 5 pci4: no spaces enabled! pcib0 at pci0 dev 31 function 0 pcib0: vendor 0x8086 product 0x2641 (rev. 0x04) piixide0 at pci0 dev 31 function 2 piixide0: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x04) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev. 0x04) ichsmb0: interrupting at ioapic0 pin 19 iic0 at ichsmb0: I2C bus isa0 at pcib0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 acpiacad0: AC adapter online. wd0 at atabus1 drive 0azalia0: codec[0]: Realtek ALC662-GR (rev. 1.1), HDA rev. 1.0 audio0 at azalia0: full duplex, independent : <ASUS-PHISON OB SSD> wd0: drive supports 1-sector PIO transfers, LBA addressing wd0: 3847 MB, 7818 cyl, 16 head, 63 sec, 512 bytes/sect x 7880544 sectors uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) wd1 at atabus1 drive 1: <ASUS-PHISON SSD> wd1: drive supports 1-sector PIO transfers, LBA addressing wd1: 7695 MB, 15636 cyl, 16 head, 63 sec, 512 bytes/sect x 15761088 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) wd1(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) umass0 at uhub4 port 5 configuration 1 interface 0 umass0: ENE UB6225, rev 2.00/1.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <USB2.0, CardReader SD0, 0100> disk removable sd0: drive offline sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0: unable to open device, error = 19 Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) syncing disks... 9 6 done unmounting file systems...Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.72 (GENERIC) #0: Fri Aug 22 14:39:04 PDT 2008 builds@wb24:/home/builds/ab/HEAD/i386/200808220002Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC total memory = 2039 MB avail memory = 1992 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 ASUSTeK Computer INC. 900 (0501) mainbus0 (root) cpu0 at mainbus0 apid 0: Intel 686-class, 900MHz, id 0x6d8 ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins acpi0 at mainbus0: Intel ACPICA 20080321 acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,07000807>, AslId <MSFT,00000097> acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 ACPI-Safe 24-bit timer attimer1 at acpi0 (TMR, PNP0100): AT Timer attimer1: io 0x40-0x43 irq 0 pckbc1 at acpi0 (PS2K, PNP0303): kbd port pckbc1: io 0x60,0x64 irq 1 pckbc2 at acpi0 (PS2M, SYN0A00): aux port pckbc2: irq 12 pcppi1 at acpi0 (SPKR, PNP0800) pcppi1: io 0x61 midi0 at pcppi1: PC speaker (CPU-intensive output) sysbeep0 at pcppi1 npx1 at acpi0 (COPR, PNP0C04) npx1: io 0xf0-0xff irq 13 npx1: reported by CPUID; using exception 16 acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller acpiec0: io 0x62,0x66 acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method) acpibat0: battery info: ASUS, LION, 900 acpiacad0 at acpi0 (AC0, ACPI0003): ACPI AC Adapter asus0 at acpi0 (ATKD, ASUS010-16843008) acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button acpitz0 at acpi0 (TZ00): critical 90.0C, passive cooling apm0 at acpi0: Power Management spec V1.2 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: vendor 0x8086 product 0x2590 (rev. 0x04) pchb0: returns constant 0xff stream, RNG disabled. agp0 at pchb0: detected 7932k stolen memory agp0: aperture at 0xd0000000, size 0x10000000 vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2592 (rev. 0x04) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 drm at vga1 not configured vendor 0x8086 product 0x2792 (miscellaneous display, revision 0x04) at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller azalia0: interrupting at ioapic0 pin 16 azalia0: host: 0x8086/0x2668 (rev. 4), HDA rev. 1.0 ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x04) pci1 at ppb0 bus 4 pci1: no spaces enabled! ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2662 (rev. 0x04) pci2 at ppb1 bus 3 pci2: memory space enabled, rd/line, wr/inv ok lii0 at pci2 dev 0 function 0: Attansic/Atheros L2 Fast Ethernet lii0: Ethernet address 00:22:15:02:48:6d lii0: interrupting at ioapic0 pin 17 ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface ukphy0: OUI 0x00c82e, model 0x0002, rev. 2 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2664 (rev. 0x04) pci3 at ppb2 bus 1 pci3: memory space enabled, rd/line, wr/inv ok ath0 at pci3 dev 0 function 0 ath0: interrupting at ioapic0 pin 18 ath0: unable to attach hardware; HAL status 13 uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x04) uhci0: interrupting at ioapic0 pin 23 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x04) uhci1: interrupting at ioapic0 pin 19 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x04) uhci2: interrupting at ioapic0 pin 18 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x04) uhci3: interrupting at ioapic0 pin 16 usb3 at uhci3: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x04) ehci0: interrupting at ioapic0 pin 23 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd4) pci4 at ppb3 bus 5 pci4: no spaces enabled! pcib0 at pci0 dev 31 function 0 pcib0: vendor 0x8086 product 0x2641 (rev. 0x04) piixide0 at pci0 dev 31 function 2 piixide0: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x04) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev. 0x04) ichsmb0: interrupting at ioapic0 pin 19 iic0 at ichsmb0: I2C bus isa0 at pcib0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 acpiacad0: AC adapter online. wd0 at atabus1 drive 0azalia0: codec[0]: Realtek ALC662-GR (rev. 1.1), HDA rev. 1.0 audio0 at azalia0: full duplex, independent : <ASUS-PHISON OB SSD> wd0: drive supports 1-sector PIO transfers, LBA addressing wd0: 3847 MB, 7818 cyl, 16 head, 63 sec, 512 bytes/sect x 7880544 sectors uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) wd1 at atabus1 drive 1: <ASUS-PHISON SSD> wd1: drive supports 1-sector PIO transfers, LBA addressing wd1: 7695 MB, 15636 cyl, 16 head, 63 sec, 512 bytes/sect x 15761088 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) wd1(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) umass0 at uhub4 port 5 configuration 1 interface 0 umass0: ENE UB6225, rev 2.00/1.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <USB2.0, CardReader SD0, 0100> disk removable sd0: drive offline sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0: unable to open device, error = 19 Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)
Attachment:
pgpFye1k4FRGu.pgp
Description: PGP signature