Re: Everex cloudbook

To: "Jared D. McNeill" <jmcneill%invisible.ca@localhost>
Subject: Re: Everex cloudbook
From: "Cherry G. Mathew" <cherry.g.mathew%gmail.com@localhost>
Date: Sun, 8 Jun 2008 00:28:04 -0500
On Sat, Jun 7, 2008 at 11:30 PM, Jared D. McNeill 
<jmcneill%invisible.ca@localhost> wrote:
> Can you try Xorg? I suspect it has Unichrome graphics, probably something
> newer than the in-tree XFree86 supports.
>

Don't have immediate access to xorg binaries, unfortunately. Its on my
todo list though.

>> The wireless card is not detected.
>>
>> If anyone is interested, I could post a dmesg.
>
> Please do.
>

Pasted below. Ignore the bluetooth device. Forgot to unplug it on boot.

Cheers,


-- 
~Cherry


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.63 (GENERIC) #0: Sat May 24 11:00:55 PDT 2008
        
builds@wb28:/home/builds/ab/HEAD/i386/200805240002Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
total memory = 446 MB
avail memory = 427 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Everex Systems, Inc. Everex gBook Series (VT8380D)
mainbus0 (root)
cpu0 at mainbus0 apid 0: IDT/VIA 686-class, 600MHz, id 0x6d0
cpu0: Enhanced SpeedStep (796 mV) 800 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1600 1333 933 667
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 3, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
ACPI Error (dsobject-0590): Package List length larger than
NumElements count (5), truncated
 [20080321]
ACPI Error (dsobject-0590): Package List length larger than
NumElements count (5), truncated
 [20080321]
ACPI Error (dsobject-0590): Package List length larger than
NumElements count (5), truncated
 [20080321]
acpi0: SCI interrupting at int 10
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TIME, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
pckbc1 at acpi0 (PS2M, SYN0D05): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PS2K, PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
FAN0 (PNP0C0B) at acpi0 not configured
FAN1 (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 94.8C active cooling
level 1: 69.8C critical 94.8C passive 55.8C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pms0: Synaptics touchpad version 6.3
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0324 (rev. 0x10)
agp0 at pchb0 (v3): aperture at 0xc0000000, size 0x10000000
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1106 product 0x1324 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1106 product 0x2324 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: vendor 0x1106 product 0x3324 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: vendor 0x1106 product 0x4324 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: vendor 0x1106 product 0x7324 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb198 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x3157 (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies unknown VIA ATA controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel ignored (disabled)
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15
atabus0 at viaide0 channel 1
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x90)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x90)
uhci1: interrupting at ioapic0 pin 22
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x90)
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x90)
ehci0: interrupting at ioapic0 pin 23
ehci0: dropped intr workaround enabled
ehci0: BIOS refuses to give up ownership, using force
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x8324 (rev. 0x00)
pchb6 at pci0 dev 17 function 7
pchb6: vendor 0x1106 product 0x324e (rev. 0x00)
ppb1 at pci0 dev 19 function 0: vendor 0x1106 product 0x324b (rev. 0x00)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
azalia0 at pci2 dev 1 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 17
azalia0: host: 0x1106/0x3288 (rev. 16), HDA rev. 1.0
ppb2 at pci0 dev 19 function 1: vendor 0x1106 product 0x324a (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
rtk0 at pci3 dev 9 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 16
rtk0: Ethernet address 00:14:0b:3d:c3:41
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter offline.
acpibat0: battery info: FIC , Lion, 46EA0/ECZJG
azalia0: codec[0]: 0x1106/0x1708 (rev. 7.0), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: USB 2.0 USB Flash Drive, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <USB 2.0, USB Flash Drive, 0.00> disk removable
sd0: 7711 MB, 500 cyl, 8 head, 32 sec, 512 bytes/sect x 15794175 sectors
ubt0 at uhub0 port 1
ubt0: vendor 0x0a12 product 0x0001, rev 2.00/31.64, addr 2
wd0 at atabus0 drive 0: <ST730212DE>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 28615 MB, 58140 cyl, 16 head, 63 sec, 512 bytes/sect x 58605120 sectors
ugen0 at uhub3 port 4
ugen0: vendor 0x0bda RTL8187_Wireless, rev 2.00/1.00, addr 3
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(viaide0:1:0): using PIO mode 4, DMA mode 2 (using DMA)
ugen1 at uhub3 port 5
ugen1: vendor 0x5986 USB2.0 Camera, rev 2.00/0.09, addr 4
umass1 at uhub3 port 6 configuration 1 interface 0
umass1: Generic USB2.0-CRW, rev 2.00/51.95, addr 5
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
sd1: drive offline
sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1: unable to open device, error = 19
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
References:
- Everex cloudbook
  - From: Cherry G. Mathew
- Re: Everex cloudbook
  - From: Cherry G. Mathew
- Re: Everex cloudbook
  - From: Jared D. McNeill
Prev by Date: Re: Everex cloudbook
Next by Date: recent -current changes made smartd (smartmontools) a hanging process
Previous by Thread: Re: Everex cloudbook
Next by Thread: Re: Everex cloudbook
Indexes:
Home | Main Index | Thread Index | Old Index