Re: NetBSD installation woes on Sun Blade 100

[Connor McLaughlan <cont6pro3%gmail.com@localhost>]

On Wed, Jul 22, 2020 at 7:19 AM Martin Husemann <martin%duskware.de@localhost> wrote:
>
> On Wed, Jul 22, 2020 at 01:30:13AM +0200, Connor McLaughlan wrote:
> > I have set output-device only to screen.
> > I doubled the SSIZE and the mach64 drivers seems to work as it should
> > on my machine (Sun Blade 100).
>
> Now I am completely confused. Can you please post full dmesg for that
> kernel and the patch you used?
>
> Martin

I used a GENERIC configuration and modified it only to be an insecure kernel.

I applied this change:
/usr/src/sys/arch/sparc64/include/param.h
I set both SSIZE values from 2 to 4. Guess the first value is the one
that counts.

My dmesg:
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001,
2002, 2003, 2004, 2005,
[     1.000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017,
[     1.000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All
rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All
rights reserved.

[     1.000000] NetBSD 9.0_STABLE (MYKERNEL) #0: Wed Jul 22 00:10:33 CEST 2020
[     1.000000]     root@localhost:/usr/src/sys/arch/sparc64/compile/MYKERNEL
[     1.000000] total memory = 2048 MB
[     1.000000] avail memory = 1992 MB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[     1.000000] mainbus0 (root): SUNW,Sun-Blade-100 (Sun Blade 100):
hostid 400000
[     1.000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 502 MHz, CPU id 0
[     1.000000] cpu0: manuf 17, impl 13, mask 14
[     1.000000] cpu0: system tick frequency 5.555 MHz
[     1.000000] cpu0: 16K instruction (32 b/l), 16K data (32 b/l),
256K external (64 b/l)
[     1.000000] psycho0 at mainbus0
[     1.000000] psycho0: pci108e,a001: impl 0, version 0: ign 7c0 bus
range 0 to 1; PCI bus 0
[     1.000000] pci0 at psycho0
[     1.000000] pci0: i/o space, memory space enabled
[     1.000000] ebus0 at pci0 dev 12 function 0: Sun Microsystems PCIO
Ebus2 (US III), revision 0x01
[     1.000000] flashprom at ebus0 addr 0-fffff not configured
[     1.000000] clock0 at ebus0 addr 0-1fff: mk48t59
[     1.000000] autoconfiguration error: ebus_attach: idprom: incomplete
[     1.000000] ebus1 at pci0 dev 7 function 0: Acer Labs M1533
PCI-ISA Bridge, revision 0x00
[     1.000000] dma at ebus1 addr 0-ffff ipl 2a not configured
[     1.000000] power at ebus1 addr 800-82f ipl 20 not configured
[     1.000000] com0 at ebus1 addr 3f8-3ff ipl 2b: ns16550a, working fifo
[     1.000000] com1 at ebus1 addr 2e8-2ef ipl 2b: ns16550a, working fifo
[     1.000000] alipm0 at pci0 dev 3 function 0: 223KHz clock
[     1.000000] iic0 at alipm0: I2C bus
[     1.000000] admtemp0 at iic0 addr 0x18: MAX1617A temperature
sensor: id. 0x41, rev. 0x3c
[     1.000000] spdmem0 at iic0 addr 0x50
[     1.000000] spdmem0: SDRAM, data ECC, 512MB, 133MHz (PC-133)
[     1.000000] spdmem0: 13 rows, 10 cols, 2 banks, 4 banks/chip,
7.5ns cycle time
[     1.000000] spdmem0: tAA-tRCD-tRP-tRAS: 3-20-20-45
[     1.000000] spdmem0: voltage LvTTL (not 5V tolerant), refresh time
7.8us (self-refreshing)
[     1.000000] spdmem1 at iic0 addr 0x51
[     1.000000] spdmem1: SDRAM, data ECC, 512MB, 133MHz (PC-133)
[     1.000000] spdmem1: 13 rows, 10 cols, 2 banks, 4 banks/chip,
7.5ns cycle time
[     1.000000] spdmem1: tAA-tRCD-tRP-tRAS: 3-20-20-44
[     1.000000] spdmem1: voltage LvTTL (not 5V tolerant), refresh time
7.8us (self-refreshing)
[     1.000000] spdmem2 at iic0 addr 0x52
[     1.000000] spdmem2: SDRAM, data ECC, 512MB, 133MHz (PC-133)
[     1.000000] spdmem2: 13 rows, 10 cols, 2 banks, 4 banks/chip,
7.5ns cycle time
[     1.000000] spdmem2: tAA-tRCD-tRP-tRAS: 3-20-20-44
[     1.000000] spdmem2: voltage LvTTL (not 5V tolerant), refresh time
7.8us (self-refreshing)
[     1.000000] spdmem3 at iic0 addr 0x53
[     1.000000] spdmem3: SDRAM, data ECC, 512MB, 133MHz (PC-133)
[     1.000000] spdmem3: 13 rows, 10 cols, 2 banks, 4 banks/chip,
7.5ns cycle time
[     1.000000] spdmem3: tAA-tRCD-tRP-tRAS: 3-20-20-44
[     1.000000] spdmem3: voltage LvTTL (not 5V tolerant), refresh time
7.8us (self-refreshing)
[     1.000000] gem0 at pci0 dev 12 function 1: Sun Microsystems ERI
Ethernet (rev. 0x01)
[     1.000000] gem0: interrupting at ivec 3006
[     1.000000] ukphy0 at gem0 phy 1: OUI 0x0008bb, model 0x0002, rev. 1
[     1.000000] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[     1.000000] gem0: Ethernet address 00:0e:08:00:00:00, 2KB RX fifo,
2KB TX fifo
[     1.000000] fwohci0 at pci0 dev 12 function 2: Sun Microsystems
FireWire Controller (rev. 0x01)
[     1.000000] fwohci0: interrupting at ivec 1c
[     1.000000] fwohci0: OHCI version 1.0 (ROM=0)
[     1.000000] fwohci0: No. of Isochronous channels is 4.
[     1.000000] fwohci0: EUI64 00:0e:08:ff:fe:00:00:00
[     1.000000] fwohci0: Phy 1394a available S400, 2 ports.
[     1.000000] fwohci0: Link S400, max_rec 2048 bytes.
[     1.000000] ieee1394if0 at fwohci0: IEEE1394 bus
[     1.000000] fwip0 at ieee1394if0: IP over IEEE1394
[     1.000000] fwohci0: Initiate bus reset
[     1.000000] ohci0 at pci0 dev 12 function 3: Sun Microsystems USB
Controller (rev. 0x01)
[     1.000000] ohci0: interrupting at ivec 24
[     1.000000] ohci0: OHCI version 1.0, legacy support
[     1.000000] usb0 at ohci0: USB revision 1.0
[     1.000000] autri0 at pci0 dev 8 function 0: Acer Labs M5451
AC-Link Controller Audio Device (rev. 0x01)
[     1.000000] autri0: interrupting at ivec 23
[     1.000000] autri0: ac97: Analog Devices AD1881A codec; headphone,
Analog Devices Phat Stereo
[     1.000000] audio0 at autri0: playback, capture, full duplex, independent
[     1.000000] audio0: slinear_be:16 -> slinear_le:16 2ch 48000Hz,
blk 1920 bytes (10ms) for playback
[     1.000000] audio0: slinear_be:16 <- slinear_le:16 2ch 48000Hz,
blk 1920 bytes (10ms) for recording
[     1.000000] spkr0 at audio0: PC Speaker (synthesized)
[     1.000000] wsbell at spkr0 not configured
[     1.000000] midi0 at autri0: 4DWAVE MIDI UART
[     1.000000] aceride0 at pci0 dev 13 function 0: Acer Labs M5229
UDMA IDE Controller (rev. 0xc3)
[     1.000000] aceride0: bus-master DMA support present
[     1.000000] aceride0: using PIO transfers above 137GB as
workaround for 48bit DMA access bug, expect reduced performance
[     1.000000] aceride0: primary channel configured to native-PCI mode
[     1.000000] aceride0: using ivec 180c for native-PCI interrupt
[     1.000000] atabus0 at aceride0 channel 0
[     1.000000] aceride0: secondary channel configured to native-PCI mode
[     1.000000] atabus1 at aceride0 channel 1
[     1.000000] ppb0 at pci0 dev 5 function 0: Digital Equipment
DC21152 PCI-PCI Bridge (rev. 0x03)
[     1.000000] pci1 at ppb0 bus 1
[     1.000000] pci1: i/o space, memory space enabled
[     1.000000] machfb0 at pci0 dev 19 function 0: ATI Technologies
Rage XL (rev. 0x27)
[     1.000000] machfb0: using MMIO aperture
[     1.000000] machfb0: 16 MB aperture at 0x03000000, 4 KB registers
at 0x00426000
[     1.000000] machfb0: 128 KB ROM at 0x00440000
[     1.000000] machfb0: ref_freq=29.498MHz
[     1.000000] machfb0: 8192 KB SDRAM 114.992 MHz, maximum RAMDAC clock 230 MHz
[     1.000000] machfb0: initial resolution 1280x1024 at 8 bpp
[     1.000000] wsdisplay0 at machfb0 kbdmux 1: console (default,
vt100 emulation)
[     1.000000] wsmux1: connecting to wsdisplay0
[     1.000000] wsdisplay0: screen 1-3 added (default, vt100 emulation)
[     1.000000] direct rendering for machfb0 unsupported
[     1.000000] pcons at mainbus0 not configured
[     1.000000] fwohci0: BUS reset
[     1.000000] fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
[     1.000000] ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
[     1.000000] ieee1394if0: bus manager 0
[     1.000000] timecounter: Timecounter "clockinterrupt" frequency
100 Hz quality 0
[     1.000004] timecounter: Timecounter "tick-counter" frequency
502000000 Hz quality 100
[     1.000004] timecounter: Timecounter "stick-counter" frequency
5555555 Hz quality 200
[     1.000040] No counter-timer -- using STICK at 5.555MHz as system clock.
[     1.060018] uhub0 at usb0: NetBSD (0000) OHCI root hub (0000),
class 9/0, rev 1.00/1.00, addr 1
[     1.060018] uhub0: 4 ports with 4 removable, self powered
[     3.309989] uhub1 at uhub0 port 3: vendor 0430 (0x430) product
100e (0x100e), class 9/0, rev 2.00/1.05, addr 2
[     3.329990] uhub1: 4 ports with 3 removable, bus powered
[     4.219980] wd0 at atabus0 drive 0
[     4.219980] wd0: <ST380011A>
[     4.219980] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[     4.219980] wd0: 76318 MB, 155058 cyl, 16 head, 63 sec, 512
bytes/sect x 156299375 sectors
[     4.239984] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 5 (Ultra/100)
[     4.239984] wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4
(Ultra/66) (using DMA)
[     4.239984] atapibus0 at atabus1: 2 targets
[     4.259980] cd0 at atapibus0 drive 0: <TSSTcorpDVD-ROM TS-H352D, ,
FS00> cdrom removable
[     4.269983] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 2 (Ultra/33)
[     4.279980] cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2
(Ultra/33) (using DMA)
[     4.689976] uhidev0 at uhub1 port 3 configuration 1 interface 0
[     4.700533] uhidev0: vendor 1267 (0x1267) PS/2+USB Mouse (0x213),
rev 1.10/51.15, addr 3, iclass 3/1
[     4.710484] ums0 at uhidev0: 3 buttons and Z dir
[     4.720346] wsmouse0 at ums0 mux 0
[     5.749965] uhidev1 at uhub1 port 4 configuration 1 interface 0
[     5.749965] uhidev1: vendor 0430 (0x430) Sun USB Keyboard (0xa2),
rev 2.00/1.05, addr 4, iclass 3/1
[     5.769965] ukbd0 at uhidev1
[     6.179960] wskbd1 at ukbd0: console keyboard, using wsdisplay0
[     7.729949] uhidev2 at uhub0 port 4 configuration 1 interface 0
[     7.729949] uhidev2: SONiX (0xc45) USB DEVICE (0x8513), rev
2.00/1.04, addr 5, iclass 3/1
[     7.740584] ukbd1 at uhidev2
[     8.149940] wskbd2 at ukbd1 mux 1
[     8.149940] wskbd2: connecting to wsdisplay0
[     8.149940] uhidev3 at uhub0 port 4 configuration 1 interface 1
[     8.149940] uhidev3: SONiX (0xc45) USB DEVICE (0x8513), rev
2.00/1.04, addr 5, iclass 3/1
[     8.169942] uhidev3: 4 report ids
[     8.169942] ukbd2 at uhidev3 reportid 1
[     8.589936] wskbd3 at ukbd2 mux 1
[     8.589936] wskbd3: connecting to wsdisplay0
[     8.589936] uhid0 at uhidev3 reportid 2: input=1, output=0, feature=0
[     8.589936] uhid1 at uhidev3 reportid 3: input=2, output=0, feature=0
[     8.606118] uhid2 at uhidev3 reportid 4: input=63, output=63, feature=0
[     8.619943] WARNING: 1 error while detecting hardware; check system log.
[     8.630223] root on wd0a dumps on wd0b
[     8.639940] root file system type: ffs
[     8.639940] kern.module.path=/stand/sparc64/9.0/modules
[    11.359908] autoconfiguration error: aceride0:1:0: lost interrupt
[    11.359908]     type: atapi tc_bcount: 32 tc_skip: 0
[    11.359908] autoconfiguration error: aceride0:1:0: bus-master DMA
error: missing interrupt, status=0x21
[    11.376239] aceride0:1:0: device timeout, c_bcount=32, c_skip=0
[    11.376239] cd0: autoconfiguration error: transfer error,
downgrading to Ultra-DMA mode 1
[    11.376239] cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 1
(using DMA)
[    11.391836] cd0(aceride0:1:0): generic HBA error
[    13.489887] autoconfiguration error: aceride0:1:0: lost interrupt
[    13.489887]     type: atapi tc_bcount: 32 tc_skip: 0
[    13.489887] autoconfiguration error: aceride0:1:0: bus-master DMA
error: missing interrupt, status=0x21
[    13.506239] aceride0:1:0: device timeout, c_bcount=32, c_skip=0
[    13.506239] cd0: autoconfiguration error: transfer error,
downgrading to PIO mode 4
[    13.506239] cd0(aceride0:1:0): using PIO mode 4
[    13.521627] cd0(aceride0:1:0): generic HBA error