Port-macppc archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: NetBSD 8.1 on a PowerBook G3 Wallstreet
On 7/20/19 10:37 AM, userm57%yahoo.com@localhost wrote:
> On 7/19/19 1:36 PM, Michael wrote:
> ...
>>>> This machine should just boot from CD, what exactly went wrong there?
>>>
>
> First, I tried booting while holding down the "C" key. The system
> booted Mac OS 9 from disk, with the "NetBSD 8.1 macppccd" CD in the
> CD-ROM drive. The CD can be accessed from Mac OS (as a "Mac OS
> Standard" volume).
>
>> ...
>> All Apple OF versions can read ISO9660 filesystems to varying degrees,
>> and that's all we need ( some Performas can't boot via OF from it but
>> that's a different story ). Old World versions just need load-base and
>> real-base set for the loader to work, and the syntax may be weird
>> ( even for OF... )
>> For example, you may need something like boot cd:,OFWBOOT.XCF;1
>> ( assuming there's a cd devalias )
>
> The Wallstreet has Open Firmware v2.0.1, so there is no cd devalias.
>
>> ...> What exactly did you try and what exactly did go wrong how exactly?
>>
>
> See Open Firmware information below. The CD-ROM module is in the right
> media bay; the floppy module is in the left bay.
>
>> - did the cdrom drive spin up when trying to boot from it?
> Not from OF, but I probably didn't specify the CD-ROM drive correctly:
>
> 0 > pwd /pci@80000000/mac-io@10/media-bay@34/ata1@21000/disk@0,0 ok
> 0 > boot
> /pci@800000000/mac-io@10/media-bay@34/ata1@21000/disk@0,0:,OFWBOOT.XCF;1
> can't OPEN:
> /pci@800000000/mac-io@10/media-bay@34/ata1@21000/disk@0,0:,OFWBOOT.XCF;1
I also tried "boot ide1/@0:0,\OFWBOOT.XCF" as per the PowerBook G3
Series (Wallstreet) Footnotes section near the bottom of this page:
https://www.netbsd.org/ports/macppc/models.html#pbg3s
The response was "can't OPEN: ide1/@0:0,\OFWBOOT.XCF"
>
>> - did the loader load?
> Trying the floppy drive method instead, "boot fd2:0" (left bay floppy)
> works.
>
>> - did it print something?
>> - did it crash?
>> - did it try to load a kernel?
> There were several TIMEOUT@READ errors while reading the first floppy.
> The second floppy then reports an error (see below).
>
> -----
>
> Open Firmware, 2.0.1
> To continue booting the MacOS type:
> BYE<return>
> To continue booting from the default boot device type:
> BOOT<return>
> For Open Firmware serial I/O type:
> TTYA IO<return>
> ok
> 0 > dev / ok
> 0 > ls
>
> Children of the node:
> FF829FE8: / [AAPL,PowerBook1998 MacRISC]
>
> Node Adr Node Name Compatible
>
> FF82B3E0: /cpus@0
> FF82B4F8: /PowerPC,750@0
> FF82B910: /l2-cache@0,0
> FF82BF88: /chosen@0
> FF82C0B8: /memory@0
> FF82C200: /openprom@0
> FF82C2C0: /AAPL,ROM@FFC00000 [AAPL,ROM]
> FF82C508: /options@0
> FF82D070: /aliases@0
> FF82D620: /packages@0
> FF82D6A8: /deblocker@0,0
> FF82DDD0: /disk-label@0,0
> FF82E348: /obp-tftp@0,0
> FF8305B8: /mac-files@0,0
> FF830CD8: /mac-parts@0,0
> FF831438: /aix-boot@0,0
> FF831888: /fat-files@0,0
> FF832EA0: /iso-9660-files@0,0
> FF833808: /xcoff-loader@0,0
> FF8340D0: /terminal-emulator@0,0
> FF834168: /pci@80000000 [grackle]
> FF835208: /mac-io@10 [heathrow]
> FF8363E0: /mesh@10000 [mesh]
> FF837F08: /sd@0,0 [sd]
> FF838B28: /st@0,0 [st]
> FF8397F0: /escc@13000 [escc CHRP,es0]
> FF839988: /ch-a@13020 [ch-a CHRP,es2]
> FF83A020: /ch-b@13000 [ch-b CHRP,es3]
> FF83A6B8: /bmac@11000 [bmac]
> FF83BF88: /davbus@14000
> FF83C070: /sound@0,0 [awacs screamer]
> FF83C160: /media-bay@34 [heathrow-media-bay]
> FF83C498: /floppy@15000 [ohare-swim3]
> FF83D658: /ata1@21000 [heathrow-ata]
> FF83F4B8: /disk@0,0
> FF83F568: /ata0@20000 [heathrow-ata]
> FF8413C8: /disk@0,0
> FF841450: /via-pmu@16000
> FF8430F0: /adb@0,0
> FF8431E0: /keyboard@0,0
> FF843A70: /mouse@1,0
> FF843D30: /nvram@0,0 [nvram]
> FF843EC8: /rtc@0,0 [rtc]
> FF844390: /power-mgt@0,0 [power-mgt]
> FF844480: /battery@0,0
> FF844530: /backlight@F300,0
> FF8445F0: /mac-io@D [gatwick]
> FF845840: /escc@13000
> FF845930: /ch-a@13020 [cobalt]
> FF845F80: /media-bay@34 [heathrow-media-bay]
> FF846290: /floppy@15000 [ohare-swim3]
> FF847428: /ata4@21000 [heathrow-ata]
> FF84A0D8: /ATY,RageLTPro@11
> FF8500F8: /pccard@13 [ti1130]
> FF8554E0: /pccard@13,1 [ti1130]
> ok
> 0 > devalias
> cpu0 /cpus/PowerPC,750
> pci1 /pci@80000000
> mac-io /pci/mac-io
> pmu /pci/mac-io/via-pmu
> kbd /pci/mac-io/via-pmu/adb/keyboard
> mouse /pci/mac-io/via-pmu/adb/mouse
> screen /pci/ATY,RageLTPro
> lower /pci/pccard@13
> upper /pci/pccard@13,1
> ttya /pci/mac-io/escc/ch-a
> ttyb /pci/mac-io/escc/ch-b
> scsi /pci/mac-io/mesh
> scsi-int /pci/mac-io/mesh
> ata2 /pci/pccard@13
> ata3 /pci/pccard@13,1
> bay-ata1 /pci/mac-io/media-bay/ata1/ata-disk
> atapi1 /pci/mac-io/media-bay/ata1/atapi-disk
> fd /pci/mac-io/media-bay/floppy
> bay-ata4 /pci/mac-io@D/media-bay/ata4/ata-disk
> atapi4 /pci/mac-io@D/media-bay/ata4/atapi-disk
> fd2 /pci/mac-io@D/media-bay/floppy
> enet /pci/mac-io/bmac
> ide0 /pci/@10/ata0
> ide1 /pci/@10/@34/ata1
> ide4 /pci/@d/@34/ata4
> ok
> 0 > boot fd2:0 -
> OF_open bootpath=fd2
> read stage 2 blocks: 01234567. done!
> starting stage 2...
>
>>> NetBSD/macppc OpenFirmware Boot, Revision 1.13 (Fri May 31 08:43:59
> UTC 2019)
> 6081956READ TIMEOUT@READ TIMEOUT@READ TIMEOUT@READ TIMEOUT@READ
> TIMEOUT@READ TIMEOUT@READ TIMEOUT@READ TIMEOUT@READ TIMEOUT@read text:
> Input/output error
> /
> Please remove disk 1, insert disk 2, and press return...
> open /netbsd.gz: Device not configured
> open /netbsd.macppc: Device not configured
> Boot:
> open /netbsd: Device not configured
> open /netbsd.gz: Device not configured
> open /netbsd.macppc: Device not configured
> Boot:
>
Home |
Main Index |
Thread Index |
Old Index