Re: HP NetServer boot trouble

[Joerg Sonnenberger <joerg%britannica.bec.de@localhost>]

On Sun, Jun 19, 2011 at 09:48:56PM -0400, der Mouse wrote:
> >> [ACPI breakpoint opcode in NetServer LP 1000r]
> >> Looking at the (NetBSD) code gives me the feeling this is some kind
> >> of debugging facility and I could "fix" it by just having
> >> AcpiOsSignal handle ACPI_SIGNAL_BREAKPOINT by silently returning
> >> without doing anything.
> > There were some ACPI tables in productive BIOSes that contained ACPI
> > break points.  Those are skipped now (since 5.0 or so?), so if that
> > really is the problem, try a 5.x kernel first.
> 
> No joy.  (It also appears they're not as skipped as you think.)

Ah, looks like my memory is at fault. It's dev/acpi/acpica/OsdMisc.c,
revision 1.6. netbsd-5 was branched from 1.5...

> If I "c" here, it carries on with autoconf but wedges later (more
> ten-finger copying):

What's your problem -- the cpu1: failed to start?

> 
> scsibus0: waiting 2 seconds for devices to settle...
> scsibus1: waiting 2 seconds for devices to settle...
> cpu1: failed to start
> fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
> uhub0 at usb0: vendor 0x1166 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> sd0 at scsibus0 target 0 lun 0: <DEC, RZ1CF-AF (C) DEC, 1614> disk fixed
> sd0: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
> sd0: sync (100.00ns offset 31), 8-bit (10.000MB/s) transfers
> ses0 at scsibus0 target 11 lun 0: <SDR, GEM318, 0> processor fixed
> ses0: SAF-TE Compliant Device
> ses0: async, 8-bit transfers
> atapibus0 at atabus0: 2 targets
> cd0 at atapibus0 drive 0: <CD-224E, , 1.5A> cdrom removable

Joerg