Re: rpi cm4 + waveshare mini base board B stops after kernel load

["Jake A." <vikingspamcafe%gmail.com@localhost>]

When I try the recent image 2024-07-16-netbsd-raspi-aarch64.img, I am
now able to boot the kernel to the login prompt,
but key presses from my Apple USB A1243 keyboard are not recognized.

What steps do I need to perform regarding: "To use USB, set UEFI+FDT"?

I tried setting Device Manager ->  Raspberry Pi Configuration ->
Advanced Configuration -> System Table Selection -> ACPI + Devicetree,
and my keyboard works prior to loading the kernel (Raspberry Pi splash
screen and boot countdown timer).  But not after.
When I tried setting it solely to "Devicetree" as specified in this
post: http://mail-index.netbsd.org/port-arm/2022/10/03/msg007875.html
I get a kernel load hang with hex code 0x15e9d38.

Is there something else in the Raspberry Pi config screen I need to
set, or perhaps config.txt?
I understand .dtb files and overlays; I simply need a nudge in the
right direction.

On Sat, Jul 6, 2024 at 10:16 PM Jake A. <vikingspamcafe%gmail.com@localhost> wrote:
>
> I am seeing the same symptom as the two postings referenced in the
> following README
> at https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/aarch64/README
> from 2021:
> - rpi cm4 + waveshare mini base board B seems stop after kernel load
> - fixed: To use USB, set UEFI+FDT
>
> I am using recent build 2024-06-19-netbsd-raspi-aarch64.img, and I see
> a hang here:
>     Press return to boot now, any other key for boot prompt
>     booting netbsd - starting in 0 seconds.
>     8660656
>
> hardware:
> Raspberry Pi Compute Module 4 CM4108008
> Waveshare CM4-IO-BASE-B
> UEFI Firmware v1.37
>
> The README implies that it should work, so perhaps there is something
> I need to configure?