Re: Volunteer for "Add FFS support to U-Boot"

[Jared McNeill <jmcneill%invisible.ca@localhost>]

Perfect! Good luck!


> On Feb 15, 2018, at 5:06 PM, berte <behzaterte%yandex.com@localhost> wrote:
> 
> I've already compile uboot master branch for orange pi win, currently I'm working on ffs filesystem port for uboot. 
> 
> I've some obstacles but still proceeding if stuck with it than I'll ping you back :)
> 
> Cheers,
> --berte.
> 
> 15.02.2018, 23:58, "Jared McNeill" <jmcneill%invisible.ca@localhost>:
>> Aarch64 should be fine here on the Orange Pi Win, but be aware that building U-Boot for sun50i family boards is a bit more complicated than others due to the dependency on ARM Trusted Framework.
>> 
>> There is a U-Boot framework in pkgsrc (currently based on 2017.11 release) that you may want to use as a starting point. Creating a package for your board will be simple:
>> 
>>  $ cd /usr/pkgsrc/sysutils
>>  $ cp -r u-boot-pine64 u-boot-orangepi-win
>>  $ cd u-boot-orangepi-win
>>  $ vi DESCR
>>  (Change last line of description to match your board name)
>>  $ vi Makefile
>>  (Change UBOOT_TARGET to orangepi-win, UBOOT_CONFIG to orangepi_win_defconfig, remove PKGREVISION)
>>  $ vi PLIST
>>  (Change share/u-boot/pine64 to share/u-boot/orangepi-win)
>> 
>> That should give you a working u-boot-sunxi-with-spl.bin.
>> 
>> Cheers,
>> Jared
>> 
>>>  On Feb 15, 2018, at 4:46 PM, berte <behzaterte%yandex.com@localhost> wrote:
>>> 
>>>  I've raspberry pi (v1), orange pi zero and orange pi win. So I can quickly change architecture if aarch64 not suitable.
>>> 
>>>  15.02.2018, 23:42, "Jared McNeill" <jmcneill%invisible.ca@localhost>:
>>>>  What board are you using?
>>>> 
>>>>>   On Feb 15, 2018, at 3:31 PM, berte <behzaterte%yandex.com@localhost> wrote:
>>>>> 
>>>>>   Hi Jared,
>>>>> 
>>>>>   Thanks for your support.
>>>>> 
>>>>>   I'll start with u-boot master branch and also I want to compile that for aarch64, is it okay for you?
>>>>> 
>>>>>   Cheers,
>>>>>   -- berte.
>>>>> 
>>>>>   15.02.2018, 20:05, "Jared McNeill" <jmcneill%invisible.ca@localhost>:
>>>>>>   Hi berte --
>>>>>> 
>>>>>>   Do you have any specific questions in mind?
>>>>>> 
>>>>>>   Cheers,
>>>>>>   Jared
>>>>>> 
>>>>>>   On Thu, 15 Feb 2018, berte wrote:
>>>>>> 
>>>>>>>    Hi all,
>>>>>>> 
>>>>>>>    I want to work for this title so could you please guide me about that ?
>>>>>>> 
>>>>>>>    Cheers,
>>>>>>>    --berte.