Re: Volunteer for "Add FFS support to U-Boot"

[berte <behzaterte%yandex.com@localhost>]

I've already compile uboot master branch for orange pi win, currently I'm working on ffs filesystem port for uboot. 

I've some obstacles but still proceeding if stuck with it than I'll ping you back :)

Cheers,
--berte.

15.02.2018, 23:58, "Jared McNeill" <jmcneill%invisible.ca@localhost>:
> Aarch64 should be fine here on the Orange Pi Win, but be aware that building U-Boot for sun50i family boards is a bit more complicated than others due to the dependency on ARM Trusted Framework.
>
> There is a U-Boot framework in pkgsrc (currently based on 2017.11 release) that you may want to use as a starting point. Creating a package for your board will be simple:
>
>  $ cd /usr/pkgsrc/sysutils
>  $ cp -r u-boot-pine64 u-boot-orangepi-win
>  $ cd u-boot-orangepi-win
>  $ vi DESCR
>  (Change last line of description to match your board name)
>  $ vi Makefile
>  (Change UBOOT_TARGET to orangepi-win, UBOOT_CONFIG to orangepi_win_defconfig, remove PKGREVISION)
>  $ vi PLIST
>  (Change share/u-boot/pine64 to share/u-boot/orangepi-win)
>
> That should give you a working u-boot-sunxi-with-spl.bin.
>
> Cheers,
> Jared
>
>>  On Feb 15, 2018, at 4:46 PM, berte <behzaterte%yandex.com@localhost> wrote:
>>
>>  I've raspberry pi (v1), orange pi zero and orange pi win. So I can quickly change architecture if aarch64 not suitable.
>>
>>  15.02.2018, 23:42, "Jared McNeill" <jmcneill%invisible.ca@localhost>:
>>>  What board are you using?
>>>
>>>>   On Feb 15, 2018, at 3:31 PM, berte <behzaterte%yandex.com@localhost> wrote:
>>>>
>>>>   Hi Jared,
>>>>
>>>>   Thanks for your support.
>>>>
>>>>   I'll start with u-boot master branch and also I want to compile that for aarch64, is it okay for you?
>>>>
>>>>   Cheers,
>>>>   -- berte.
>>>>
>>>>   15.02.2018, 20:05, "Jared McNeill" <jmcneill%invisible.ca@localhost>:
>>>>>   Hi berte --
>>>>>
>>>>>   Do you have any specific questions in mind?
>>>>>
>>>>>   Cheers,
>>>>>   Jared
>>>>>
>>>>>   On Thu, 15 Feb 2018, berte wrote:
>>>>>
>>>>>>    Hi all,
>>>>>>
>>>>>>    I want to work for this title so could you please guide me about that ?
>>>>>>
>>>>>>    Cheers,
>>>>>>    --berte.