Port-arm archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: Odroid heat issue and lock up



> >So I'd like to verify that others are not experiencing this. This way I
> >can hope that replacing the board will solve the problem. But since I
> >haven't asked, I really don't know.
> 
> I've got a bit of a different workload on mine (building from pkgsrc on the
> eMMC) but my ODROID-C1 (non plus), in the stock case, with all 4 cores
> running at 1.5GHz hasn't seen any of these issues on 8.0_BETA.
> 
> First thing's first -- have you tried a different SD / eMMC card, and/or
> power supply?

Using SDcards, and I have tested with a different one. I have also used 
more than one powersupply. The current one is 5.25V@2A. It was suggested 
by adafruit do to power loss throught cables. I have also used different 
cables.

Webkit2.4-GTK built to completion without lock up using reduced 
settings (after disabling webkit-jit). I've done several tests on the 
same package, and without fail it locks up not long after enabling 
another core, and or increasing above 1200Mhz.

I thought for certian this had to be a power issue. SD cards I have a 
few of and one is new. But power supplies I have many. All at 
least 5v@2A. But I really doubt I am reaching near the draw required to 
put 2Amps to the test.  

Webkit isn't the only thing that has locked up. But the temperature in 
the room seems to greatly affect it. During early spring and late 
winter, I never even thought to reduce the cpu settings. It only locked 
up a hand full of timed. And it could have been that usb2ethernet 
adapter had been bumped or something, so I never thought too much about 
it. Ever since it has warmed up it happens all the time. now nothing is 
connected to it other than what I mentioned before.

Thanks for the reply


Home | Main Index | Thread Index | Old Index