Re: 2016-10-01-netbsd-raspi-earmv6hf.img (Re: Raspberry Pi update please.)

[Alan Corey <alan01346%gmail.com@localhost>]

Is is normal to have uhidev0 keep detaching?  This is on a Raspberry
Pi 3B, I moved the mouse from an external hub to the internal one,
doesn't make much difference.  It seems to work so it's connected most
of the time.  Looking in the archives I thought this had been fixed.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.39 (RPI2) #7: Thu Sep 29 20:10:24 JST 2016
	jun%amiasp1.soum.co.jp@localhost:/usr/obj/kernel/earmv6hf/RPI2
total memory = 944 MB
avail memory = 925 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: 600 MHz Cortex-A53 r0p4 (Cortex V8A core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB/64B 2-way L1 VIPT Instruction cache
cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
cpu0: 512KB/64B 16-way write-through L2 PIPT Unified cache
vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
cpu1 at mainbus0 core 1
cpu2 at mainbus0 core 2
cpu3 at mainbus0 core 3
obio0 at mainbus0
bcmicu0 at obio0: Multiprocessor
armgtmr0 at obio0: ARMv7 Generic 64-bit Timer (19200 kHz)
armgtmr0: interrupting on irq 3
timecounter: Timecounter "armgtmr0" frequency 19200000 Hz quality 500
bcmmbox0 at obio0 intr 193: VC mailbox
vcmbox0 at bcmmbox0
vchiq0 at obio0 intr 194: BCM2835 VCHIQ
bcmpm0 at obio0: Power management, Reset and Watchdog controller
bcmdmac0 at obio0: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10
bcmrng0 at obio0: RNG
plcom0 at obio0 intr 185
plcom0: txfifo disabled
plcom0: console
genfb0 at obio0: switching to framebuffer console
genfb0: framebuffer at 0xfd402000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (default, vt100 emulation)
sdhc0 at obio0 intr 190: SDHC controller
sdhc0: interrupting on intr 190
dwctwo0 at obio0 intr 137: USB controller
bcmspi0 at obio0 intr 182: SPI
spi0 at bcmspi0: SPI bus
bcmbsc at obio0 not configured
bsciic0 at obio0 intr 181: BSC1
iic0 at bsciic0: I2C bus
bcmgpio0 at obio0: GPIO [0...31]
gpio0 at bcmgpio0: 32 pins
bcmgpio1 at obio0: GPIO [32...53]
gpio1 at bcmgpio1: 22 pins
bcmcm at obio0 not configured
bcmpwm at obio0 not configured
usb0 at dwctwo0: USB revision 2.0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpu1: 600 MHz Cortex-A53 r0p4 (Cortex V8A core)
cpu1: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu1: 32KB/64B 2-way L1 VIPT Instruction cache
cpu1: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
cpu1: 512KB/64B 16-way write-through L2 PIPT Unified cache
vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
cpu3: 600 MHz Cortex-A53 r0p4 (Cortex V8A core)
cpu3: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu3: 32KB/64B 2-way L1 VIPT Instruction cache
cpu3: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
cpu3: 512KB/64B 16-way write-through L2 PIPT Unified cache
vfp3 at cpu3: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
cpu2: 600 MHz Cortex-A53 r0p4 (Cortex V8A core)
cpu2: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu2: 32KB/64B 2-way L1 VIPT Instruction cache
cpu2: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
cpu2: 512KB/64B 16-way write-through L2 PIPT Unified cache
vfp2 at cpu2: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
sdhc0: SDHC 3.0, rev 153, platform DMA, 250000 kHz, HS SDR50 3.3V,
re-tuning mode 1, 1024 byte blocks
sdmmc0 at sdhc0 slot 0
uhub0 at usb0: vendor 0000 DWC2 root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
IPsec: Initialized Security Association Processing.
ld0 at sdmmc0: <0x12:0x5678:ASTC:0x34:0x000065ce:0x104>
ld0: 7616 MB, 3868 cyl, 64 head, 63 sec, 512 bytes/sect x 15597568 sectors
ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
uhub1 at uhub0 port 1: vendor 0424 product 9514, class 9/0, rev
2.00/2.00, addr 2
uhub1: multiple transaction translators
uhub1: 5 ports with 4 removable, self powered
usmsc0 at uhub1 port 1
usmsc0: vendor 0424 product ec00, rev 2.00/2.00, addr 3
usmsc0: Ethernet address b8:27:eb:6a:a4:3a
ukphy0 at usmsc0 phy 1: OUI 0x00800f, model 0x000c, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
urtwn0 at uhub1 port 4
urtwn0: Realtek 802.11n WLAN Adapter, rev 2.00/2.00, addr 4
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address 44:33:4c:64:6d:58
urtwn0: 1 rx pipe, 2 tx pipes
urtwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
urtwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps
18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
uhub2 at uhub1 port 5: vendor 05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 5
uhub2: multiple transaction translators
uhub2: 4 ports with 4 removable, self powered
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub2 port 3 configuration 1 interface 0
uhidev1: Logitech USB Keyboard, rev 1.10/66.01, addr 7, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub2 port 3 configuration 1 interface 1
uhidev2: Logitech USB Keyboard, rev 1.10/66.01, addr 7, iclass 3/0
uhidev2: 3 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev2 reportid 3: input=3, output=0, feature=0
ugen0 at uhub2 port 4
ugen0: Realtek RTL2838UHIDIR, rev 2.00/1.00, addr 8
uhub0: illegal enable change, port 1
WARNING: 1 error while detecting hardware; check system log.
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
kern.module.path=/stand/evbarm/7.99.39/modules
vchiq: local ver 6 (min 3), remote ver 6.
vcaudio0 at vchiq0: auds
vchiq_get_state: g_state.remote->initialised != 1 (0)
vchiq: vchiq_initialise: videocore initialized after 1 retries

WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
audio0 at vcaudio0: half duplex, playback, capture, independent
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsdisplay0: screen 4 added (default, vt100 emulation)
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub2 port 1 (addr 6) disconnected
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub1 port 3 (addr 6) disconnected
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub1 port 3 (addr 6) disconnected
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub1 port 3 (addr 6) disconnected
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev0: detached
uhidev0: at uhub1 port 3 (addr 6) disconnected
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/63.00, addr 6, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0


On 10/1/16, Alan Corey <alan01346%gmail.com@localhost> wrote:
> Never mind, gunzip -t says it's OK.
>
> On 10/1/16, Alan Corey <alan01346%gmail.com@localhost> wrote:
>> Is there an md5 or sha for 2016-10-01-netbsd-raspi-earmv6hf.img.gz
>> somewhere?
>>
>> I started downloading it days ago, might finish today, but it's had a
>> few dozen interruptions and I'd like to check it.  It's 87% downloaded
>> so far.
>>
>> --
>> Credit is the root of all evil.  - AB1JX
>>
>
>
> --
> Credit is the root of all evil.  - AB1JX
>


-- 
Credit is the root of all evil.  - AB1JX