NetBSD-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Laptop crashes with PCMCIA insertion/removal



Hi,

I have an older laptop which has no built-in network, but two PCMCIA cards, so one can insert e.g. a wired and a wireless card. I just installed NetBSD 7.0 on it. However, I can't get network on it because any card I tried to insrt (tried two wireless, one wired) causes a kernel panic. If I boot the machine without cards and insert it after, I get a crasg. But if I leave it in, the card does not get detected as a device and I get a crash on eject.

I attach a dmesg below, luckily at the next reboot the previous got preserved.
I also have the the "core" that got saved in /var/crash at the next reboot.

Why does it say "no cardbus found" when I see this:
cbb0: cacheline 0x40 lattimer 0x40
cbb0: bhlc 0x824040
cbb0: secondary bus number uninitialized; try PCI_BUS_FIXUP
cbb0: interrupting at irq 10
cardslot0 at cbb0
pcmcia0 at cardslot0
cbb1: cacheline 0x40 lattimer 0x10
cbb1: bhlc 0x821040
cbb1: secondary bus number uninitialized; try PCI_BUS_FIXUP
cbb1: interrupting at irq 10
cardslot1 at cbb1
pcmcia1 at cardslot1


Thank you,
Riccardo
---


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0 (GENERIC.201509250726Z)
total memory = 383 MB
avail memory = 360 MB
kern.module.path=/stand/i386/7.0/modules
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 0x20<config_unit>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
MiTAC            6120             (00)
mainbus0 (root)
ACPI: RSDP 0xf0010 000014 (v00 OID_00)
ACPI: RSDT 0x17fffbd0 00002C (v01 OID_00 RSDT_000 30303030   ?& 00010000)
ACPI: FACP 0x17fffb20 000074 (v01 OID_00 FACP_000 30303030   ?& 00010000)
ACPI: DSDT 0x17ffcc80 002E99 (v01 INT440 SYSFexxx 00001001 MSFT 0100000B)
ACPI: FACS 0x17ffffc0 000040
ACPI: BOOT 0x17fffba0 000026 (v01 OID_00 BOOT_000 30303030   ?& 00010000)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0: Intel 686-class, 697MHz, id 0x683
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <OID_00,RSDT_000,30303030>, AslId < M^P&,00010000>
LNKD: ACPI: Found matching pin for 0.7.INTD at func 2: 128
LNKD: BIOS IRQ 128 for 0.7.INTD is invalid
LNKA: ACPI: Found matching pin for 0.8.INTA at func 0: 10
LNKB: ACPI: Found matching pin for 0.10.INTA at func 0: 5
LNKC: ACPI: Found matching pin for 0.9.INTA at func 0: 5
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
acpiec0 at acpi0 (EC0, PNP0C09)
: io 0x62,0x66
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibat0 at acpi0 (BAT0, PNP0C0A): ACPI Battery
acpibut0 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpibut1 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
pckbc1 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
pckbc2 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64 irq 1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x448 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
SYSR (PNP0C02) at acpi0 not configured
COPR (PNP0C04) at acpi0 not configured
FDC0 (PNP0700) at acpi0 not configured
LPT (PNP0400) at acpi0 not configured
UAR0 (PNP0501) at acpi0 not configured
FIR (NSC6001) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-646)
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pms0: Synaptics touchpad version 4.1
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x7190 (rev. 0x03)
agp0 at pchb0: aperture at 0x20000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7191 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x4c42 (rev. 0xdc)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
pcib0 at pci0 dev 7 function 0: vendor 0x8086 product 0x7110 (rev. 0x02)
piixide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: vendor 0x8086 product 0x7112 (rev. 0x01)
LNKD: Picked IRQ 5 with weight 0
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 7 function 3: vendor 0x8086 product 0x7113 (rev. 0x02)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 900
piixpm0: 24-bit timer
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
cbb0 at pci0 dev 8 function 0: vendor 0x104c product 0xac1c (rev. 0x01)
cbb1 at pci0 dev 8 function 1: vendor 0x104c product 0xac1c (rev. 0x01)
clcs0 at pci0 dev 9 function 0: vendor 0x1013 product 0x6003 (rev. 0x01)
clcs0: interrupting at irq 5
clcs0: ac97: Crystal CS4297 codec; headphone, 18 bit DAC, 18 bit ADC, no 3D stereo
audio0 at clcs0: full duplex, playback, capture, independent
midi1 at clcs0: CS4280 MIDI UART
vendor 0x11c1 product 0x044a (miscellaneous communications, revision 0x01) at pci0 dev 10 function 0 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
cbb0: cacheline 0x40 lattimer 0x40
cbb0: bhlc 0x824040
cbb0: secondary bus number uninitialized; try PCI_BUS_FIXUP
cbb0: interrupting at irq 10
cardslot0 at cbb0
pcmcia0 at cardslot0
cbb1: cacheline 0x40 lattimer 0x10
cbb1: bhlc 0x821040
cbb1: secondary bus number uninitialized; try PCI_BUS_FIXUP
cbb1: interrupting at irq 10
cardslot1 at cbb1
pcmcia1 at cardslot1
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0
wd0: <IC25N020ATCS04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 38760 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <Pioneer DVD-ROM ATAPIModel DVD-K11T 010, , E1.03> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
WARNING: clock gained 4 days
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
panic: no cardbus on cardslot0
cpu0: Begin traceback...
vpanic(c0d3f14c,d2e6df68,d2e6df8c,c0256724,c0d3f14c,c1b9791c,c0d3f141,0,0,c1a85c38) at netbsd:vpanic+0x121 snprintf(c0d3f14c,c1b9791c,c0d3f141,0,0,c1a85c38,0,c1a85c20,c025641c,c1b99d20) at netbsd:snprintf cardslot_16_submatch(c1a85c20,1194000,119d000,0,c0100304,0,0,0,0,0) at netbsd:cardslot_16_submatch
cpu0: End traceback...

dumping to dev 0,1 offset 2695
dump succeede


Home | Main Index | Thread Index | Old Index