Hardware status for IBM X3550 (dmesg)

[Ulrich Habel <rhaen%NetBSD.org@localhost>]

I managed to get a grip on a IBM xSeries 3550 with SAS harddrives. I
planned to use it for Xen, however NetBSD wasn't able to detect the SAS
drives. I've attached a dmesg output for information. I don't plan to do
any further testing.

NetBSD-4.0 has been booted


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0 (INSTALL_LARGE) #0: Sun Dec 16 01:44:06 PST 2007
        
builds@wb34:/home/builds/ab/netbsd-4-0-RELEASE/i386/200712160005Z-obj/home/builds/ab/netbsd-4-0-RELEASE/src/sys/arch/i386/compile/INSTALL_LARGE
total memory = 3071 MB
rbus: rbus_min_start set to 0xc0000000
avail memory = 3006 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd841
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel (686-class), 2992.62 MHz, id 0xf64
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 e4bd<SSE3,MONITOR,DS-CPL,VMX,EST,CID,xTPR>
cpu0: features3 20000000<EM64T>
cpu0: "Intel(R) Xeon(TM) CPU 3.00GHz"
cpu0: I-cache 12K uOp cache 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: calibrating local timer
cpu0: apic clock running at 166 MHz
cpu0: 64 page colors
cpu1 at mainbus0: apid 2 (application processor)
cpu1: not started
cpu2 at mainbus0: apid 1 (application processor)
cpu2: not started
cpu3 at mainbus0: apid 3 (application processor)
cpu3: not started
ioapic0 at mainbus0 apid 14 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <IBM   ,SERDEFNT,00001000>, AslId <IBM ,45444f43>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A08 [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0003 [APIC] at acpi0 not configured
PNP0003 [APIC] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0C04 [Math Coprocessor] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0103 [HPET Timer] at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x25c0 (rev. 0x31)
ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x25f7 (rev. 0x31)
pci1 at ppb0 bus 16
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x3500 (rev. 0x01)
pci2 at ppb1 bus 17
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x3510 (rev. 0x01)
pci3 at ppb2 bus 19
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci2 dev 1 function 0: vendor 0x8086 product 0x3514 (rev. 0x01)
pci4 at ppb3 bus 18
pci4: no spaces enabled!
ppb4 at pci1 dev 0 function 3: vendor 0x8086 product 0x350c (rev. 0x01)
pci5 at ppb4 bus 20
pci5: no spaces enabled!
ppb5 at pci0 dev 3 function 0: vendor 0x8086 product 0x25e3 (rev. 0x31)
pci6 at ppb5 bus 35
pci6: i/o space, memory space enabled
ppb6 at pci0 dev 4 function 0: vendor 0x8086 product 0x25f8 (rev. 0x31)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci0 dev 5 function 0: vendor 0x8086 product 0x25e5 (rev. 0x31)
pci8 at ppb7 bus 34
pci8: no spaces enabled!
ppb8 at pci0 dev 6 function 0: vendor 0x8086 product 0x25e6 (rev. 0x31)
pci9 at ppb8 bus 3
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci9 dev 0 function 0: vendor 0x1166 product 0x0103 (rev. 0xc3)
pci10 at ppb9 bus 4
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
bnx0 at pci10 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T
bnx0: Ethernet address 00:1a:64:12:39:e9
ukphy0 at bnx0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x001018, model 0x0036, rev. 6
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb10 at pci0 dev 7 function 0: vendor 0x8086 product 0x25e7 (rev. 0x31)
pci11 at ppb10 bus 2
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x9005 product 0x0286 (RAID mass storage, revision 0x02) at pci11 dev 0 
function 0 not configured
vendor 0x8086 product 0x1a38 (miscellaneous system, revision 0x31) at pci0 dev 
8 function 0 not configured
pchb1 at pci0 dev 16 function 0
pchb1: vendor 0x8086 product 0x25f0 (rev. 0x31)
pchb2 at pci0 dev 16 function 1
pchb2: vendor 0x8086 product 0x25f0 (rev. 0x31)
pchb3 at pci0 dev 16 function 2
pchb3: vendor 0x8086 product 0x25f0 (rev. 0x31)
pchb4 at pci0 dev 17 function 0
pchb4: vendor 0x8086 product 0x25f1 (rev. 0x31)
pchb5 at pci0 dev 19 function 0
pchb5: vendor 0x8086 product 0x25f3 (rev. 0x31)
pchb6 at pci0 dev 21 function 0
pchb6: vendor 0x8086 product 0x25f5 (rev. 0x31)
pchb7 at pci0 dev 22 function 0
pchb7: vendor 0x8086 product 0x25f6 (rev. 0x31)
ppb11 at pci0 dev 28 function 0: vendor 0x8086 product 0x2690 (rev. 0x09)
pci12 at ppb11 bus 5
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
ppb12 at pci12 dev 0 function 0: vendor 0x1166 product 0x0103 (rev. 0xc3)
pci13 at ppb12 bus 6
pci13: i/o space, memory space enabled, rd/line, wr/inv ok
bnx1 at pci13 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T
bnx1: Ethernet address 00:1a:64:12:39:eb
ukphy1 at bnx1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x001018, model 0x0036, rev. 6
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2688 (rev. 0x09)
uhci0: interrupting at ioapic0 pin 23 (irq 5)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2689 (rev. 0x09)
uhci1: interrupting at ioapic0 pin 22 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x268a (rev. 0x09)
uhci2: interrupting at ioapic0 pin 23 (irq 5)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x268c (rev. 0x09)
ehci0: interrupting at ioapic0 pin 23 (irq 5)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb13 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd9)
pci14 at ppb13 bus 1
pci14: i/o space, memory space enabled
vga1 at pci14 dev 1 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x2670 (rev. 0x09)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 631xESB/632xESB IDE Controller (rev. 0x09)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
vendor 0x8086 product 0x269b (SMBus serial bus, revision 0x09) at pci0 dev 31 
function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
timecounter: Timecounter "TSC" frequency 2992713660 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
md0: internal 5000 KB image area
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <UJDA770 DVD/CDRW, , 1.21> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 36 days
WARNING: CHECK AND RESET THE DATE!
warning: no /dev/console
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Motorola USB Keyboard & Mouse, rev 1.10/1.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Motorola USB Keyboard & Mouse, rev 1.10/1.00, addr 2, iclass 3/1
uhid at uhidev1 not configured

Regards
Uli