Re: kern/43806: No sound on Thinkpad T510

[bch%methodlogic.net@localhost]

On Fri, Aug 27, 2010 at 07:25:10PM +0000, bch%methodlogic.net@localhost wrote:
> On Fri, Aug 27, 2010 at 05:20:03PM +0000, Bernd Ernesti wrote:
> > The following reply was made to PR kern/43806; it has been noted by GNATS.


Sorry for poor formatting. Commands are (as root on my box):

# hdaudioctl list
# hdaudioctl set 0x00 0x01

0x00 and 0x01 are params for my machine. See output of "hdaudioctl list"
cmd to see what works for your machine.

> I'm running -current on a T410, and it's hit/miss whether it will produce
> audio via built-in speakers or out audio jack at any one time... I've
> taken to (as root)
> 
> hdaudioctl list hdaudioctl set 0x00 0x01 # adjust the 0x00, 0x01 per
> output of hdaudioctl list -- I just picked first device listed in
> "hdaudioctl list"
> 
> After this resetting, I can usually listen to audio as I want. Mixer,
> however has been non-functional for a while now...
> 
> -bch
> 
> > From: Bernd Ernesti <netbsd%lists.veego.de@localhost>
> > To: gnats-bugs%NetBSD.org@localhost
> > Cc: 
> > Subject: Re: kern/43806: No sound on Thinkpad T510
> > Date: Fri, 27 Aug 2010 19:16:48 +0200
> > 
> >  On Fri, Aug 27, 2010 at 01:30:00PM +0000, lechapelaing%yahoo.fr@localhost 
> > wrote:
> >  
> >  [..]
> >  > hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
> >  > hdaudio0: interrupting at ioapic0 pin 16
> >  > hdafg0 at hdaudio0 vendor 0x10DE product 0x000B nid 0x01 (firmware 
> > configuration)
> >  > hdafg0: DAC00 2ch: Digital Out [Jack]
> >  > hdafg0: 2ch/0ch 48000Hz 16/16*
> >  > audio0 at hdafg0: full duplex, playback, capture, independent
> >  > hdafg1 at hdaudio0 vendor 0x10DE product 0x000B nid 0x01 (firmware 
> > configuration)
> >  > hdafg1: DAC00 2ch: Digital Out [Jack]
> >  > hdafg1: 2ch/0ch 48000Hz 16/16*
> >  > audio1 at hdafg1: full duplex, playback, capture, independent
> >  > hdafg2 at hdaudio0 vendor 0x10DE product 0x000B nid 0x01 (firmware 
> > configuration)
> >  > hdafg2: DAC00 2ch: Digital Out [Jack]
> >  > hdafg2: 2ch/0ch 48000Hz 16/16*
> >  > audio2 at hdafg2: half duplex, capture
> >  > hdafg3 at hdaudio0 vendor 0x10DE product 0x000B nid 0x01 (firmware 
> > configuration)
> >  > hdafg3: DAC00 2ch: Digital Out [Jack]
> >  > hdafg3: 2ch/0ch 48000Hz 16/16*
> >  > audio3 at hdafg3: half duplex, capture
> >  [..]
> >  
> >  > hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
> >  > hdaudio1: interrupting at ioapic0 pin 17
> >  > hdafg4 at hdaudio1 vendor 0x14F1 product 0x5069 nid 0x01 (firmware 
> > configuration)
> >  > hdafg4: DAC00 2ch: HP Out [Jack]
> >  > hdafg4: ADC01 2ch: Mic In [Jack]
> >  > hdafg4: DAC02 2ch: Speaker [Built-In]
> >  > hdafg4: ADC03 2ch: Mic In [Built-In]
> >  > hdafg4: 2ch/2ch 44100Hz 48000Hz 96000Hz 16/16 20/32 24/32
> >  > audio4 at hdafg4: full duplex, playback, capture, independent
> >  > hdvsmfg at hdaudio1 vendor 0x14F1 product 0x5069 nid 0x02 not configured
> >  
> >  Welcome to the wonderful world of audio via HDMI.
> >  It would be really nice to attach the HDMI audio* after the 'real' one.
> >  
> >  If you use the devices from audio4 then you get the sound.
> >  
> >  Bernd
> >  
> 
> -- 
> Brad Harder
> Method Logic Digital Consulting
> http://methodlogic.net
> http://twitter.com/bcharder
> 

-- 
Brad Harder
Method Logic Digital Consulting
http://methodlogic.net
http://twitter.com/bcharder