Re: Indigo R3000, Indigo R4000 and Indy R5000

[Frank Scheiner <frank.scheiner%web.de@localhost>]

Hi,

On 08/25/2018 08:13 AM, Naruaki.Etomi wrote:
> Try this kernel.
> https://github.com/nullnilaki/NetBSD_irisboot/blob/master/IndigoR3K/re_netbsd.ecoff
>
> This kernel might be able to deal with MAC address problem.

Unfortunately not (yet):

```
>> eaddr

Ethernet address is ---- 08:00:69:11:22:33
>> boot
Setting $netaddr to 172.16.2.103 (from server )
Obtaining  from server
2829712+0+82768 entry: 0x80002000
[   1.0000000] arcemu: unknown console "", using serial
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014,
2015, 2016, 2017,
[   1.0000000]     2018 The NetBSD Foundation, Inc.  All rights
reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All
rights reserved.

[   1.0000000] NetBSD 8.99.24 (GENERIC32_IP12) #6: Sat Aug 25 05:57:06
UTC 2018
[   1.0000000]  naruaki@:/usr/obj.sgimips/sys/arch/sgimips/compile
/GENERIC32_IP12
[   1.0000000] total memory = 24576 KB
[   1.0000000] (0 reserved for ARCS)
[   1.0000000] avail memory = 21124 KB
[   1.0000000] WARNING: module error: sequencer: can't find builtin
dependency `midi'
[   1.0000000] mainbus0 (root): SGI-IP12 [SGI, IP12], 1 processor
[   1.0000000] cpu0 at mainbus0: MIPS R3000A CPU (0x230) Rev. 3.0 with
MIPS R3010 FPC Rev. 4.0
[   1.0000000] cpu0: 32KB/4B direct-mapped Instruction cache, 64 TLB
entries
[   1.0000000] cpu0: 32KB/4B direct-mapped write-through Data cache
[   1.0000000] int0 at mainbus0 addr 0x1fb801c0
[   1.0000050] pic0 at mainbus0 addr 0x1fa00000
[   1.0000050] pic0: Revision B: dblk (0x2), iblk (0x8)
[   1.0000050] pic0: Indigo R3000, board revision 1
[   1.0000050] pic0: cache disabled, store partial, bus drive
[   1.0000050] gio0 at pic0
[   1.0000050] light0 at gio0: SGI LG2 (board revision 3)
[   1.0000050] wsdisplay0 at light0 kbdmux 1
[   1.0000050] hpc0 at gio0: SGI HPC1.5 (onboard)
[   1.0000050] zsc0 at hpc0 offset 0xd10arcemu: unknown console "",
using serial

[   1.0000050] zstty0 at zsc0 channel 1 (console i/o)
[   1.0000050] zstty1 at zsc0 channel 0
[   1.0000050] zsc1 at hpc0 offset 0xd00arcemu: unknown console "",
using serial

[   1.0000050] zsms0 at zsc1 channel 1: baud rate 4800
[   1.0000050] wsmouse0 at zsms0 mux 0
[   1.0000050] zskbd0 at zsc1 channel 0: baud rate 600
[   1.0000050] wskbd0 at zskbd0 mux 1
[   1.0000050] sq0 at hpc0 offset 0x100: SGI Seeq 8003
[   1.0000050] sq0: Ethernet address 00:00:00:00:00:00
[   1.0000050] Get MAC address! via arcemu
[   1.0000050] wdsc0 at hpc0 offset 0x11f: WD33C93A (20.0 MHz clock,
BURST DMA, SCSI ID 0)
[   1.0000050] scsibus0 at wdsc0: 8 targets, 8 luns per target
[   1.0000050] dpclock0 at mainbus0 addr 0x1fb80e00
[   1.8553730] scsibus0: waiting 2 seconds for devices to settle...
[   2.4653170] WARNING: module error: sequencer: can't find builtin
dependency `midi'
[   3.9852610] sd0 at scsibus0 target 1 lun 0: <SEAGATE, ST1280, 5822>
disk fixed
[   4.0752530] sd0: 228 MB, 1476 cyl, 5 head, 63 sec, 512 bytes/sect x
468655 sectors
[   4.1654770] sd0: sync (200.00ns offset 12), 8-bit (5.000MB/s)
transfers, tagged queueing
[   5.7953010] boot device: sq0
[   5.8252370] root on sq0
```

I also checked under IRIX 5.3 to further rule out a hardware error and
it sees the real MAC address there:

```
IRIS 9# /usr/etc/netstat -ia
Name Mtu   Network     Address            Ipkts Ierrs    Opkts Oerrs  Coll
ec0* 1500  190.168     IRIS                   0     0        1     0     5
                        224.0.0.1
                        08:00:69:11:22:33
```

> Please don't get your hopes up...

Never.

Say, can we get a printout of sq0 related data in memory during kernel 
startup, maybe we spot the MAC address somewhere else as expected.

Cheers,
Frank