Port-arm archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: serial console on Pi Zero W

On Mon, 23 Aug 2021 at 16:39 +0200, Pouya Tafti wrote:
> I started suspecting the wires and replaced them.  It seems
> to work now, up to a point before it starts printing
> gibberish, but I guess that may be because my ttys are
> misconfigured.  Will experiment with those settings next.

I was wrong again (although as I suspected this had to do
with changing baud rates).  The reason is this:


As a work-around, I added force_turbo=1 to config.txt on
the boot partition, which worked.

Home | Main Index | Thread Index | Old Index