Port-arm archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: How to install the new kernel image?



On 01/01/18 10:36, Tom Ivar Helbekkmo wrote:
Tom Ivar Helbekkmo <tih%hamartun.priv.no@localhost> writes:

Your booting infrastructure is newer, though.  I should probably try
updating those files, and see if that helps.
I updated to the latest firmware files in -current.  They boot my kernel
from October just fine, but not a current one.  There is a difference,
though: the old firmware just sat with the rainbow screen when it tried
to boot the new kernel, while the new firmware shows a black screen.  My
monitor is slow to wake up, so something may have happened before that,
of course.

cvs update

sys/arch/evbarm/rpi/rpi_start.S:1.16 should fix this.


Also, it finally dawned on me why it seemed that the kernel from October
would randomly hang while ifconfig'ing the built in network interface:
turns out it hung if nothing else was connected to USB at the time, but
worked just fine each time I had a keyboard attached.  I now have a WiFi
stick that I happened to have handy plugged into the Pi, and the network
i/f comes up reliably.  :)
 Please file a PR

Thanks,
Nick


Home | Main Index | Thread Index | Old Index