[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: 2013-09-09-netbsd-evbarm.img (Re: 2013-08-23-netbsd-raspi.img)
On 09/12/2013 20:53, Nick Hudson wrote:
On 09/12/13 17:41, Carsten Larsen wrote:
On 12 Sep 2013, 09:58 (CEST), Jun Ebihara wrote:
I've updated 2013-09-09-netbsd-evbarm.img.gz for RPI.
I fetched the image and installed it a few days ago.
- More Migration test for hardfloat: userland and pkgsrc
There seems to be an issue with vfs. Also when I attach an USB network
interface the module fails. I assume it might be due lack of power.
If you mean the
WARNING: module error:vfs load failed for `usbverbose', error 45
messages when you say 'issue with vfs' then you can ignore these.
OK. Ignored :)
As for your axe(4), if you aren't physically removing/re-inserting it
then it is most likely power. Debug output from uhubdebug=20 might help.
btw, what's wrong with the built in ethernet? :)
All I did during the previously posted dmesg sequence was to power on
the PI and then finally unplug the USB NIC.
I didn't try to debug afterwards but I did conclude the hardware acts
unpredictable when not enough current is supplied. I had some similar
experiences with another ARM board and when I upgraded the PSU all
Besides, the NetBSD image from Jun Ebihara works perfectly.
Main Index |
Thread Index |