Re: 2013-09-09-netbsd-evbarm.img (Re: 2013-08-23-netbsd-raspi.img)

[Carsten Larsen <csr%innolan.dk@localhost>]

On 12 Sep 2013, 09:58 (CEST), Jun Ebihara wrote:
> I've updated 2013-09-09-netbsd-evbarm.img.gz for RPI.
>
> ftp://ftp.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2013-09-09-netbsd-evbarm.img.gz

I fetched the image and installed it a few days ago.

> Todo:
> - More Migration test for hardfloat: userland and pkgsrc
> - benchmarking

There seems to be an issue with vfs. Also when I attach an USB network 
interface the module fails. I assume it might be due lack of power.


dmesg for the device:


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.23 (RPI) #0: Thu Sep  5 11:27:49 JST 2013
        
jun%undead-kobold.soum.co.jp@localhost:/usr/obj/evbarm.evbarm/sys/arch/evbarm/compile/RPI
total memory = 192 MB
avail memory = 182 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: 700 MHz ARM1176JZ-S r0p7 (ARM11J V6ZK core)
cpu0: DC enabled IC enabled WB enabled LABT
cpu0: isar: [0]=0x140011 [1]=0x12002111 [2]=0x11231121 [3]=0x1102131, 
[4]=0x1141, [5]=0
cpu0: mmfr: [0]=0x1130003 [1]=0x10030302 [2]=0x1222100 [3]=0
cpu0: pfr: [0]=0x111 [1]=0x11
cpu0: 16KB/32B 4-way L1 Instruction cache
cpu0: 16KB/32B 4-way write-back-locking-C L1 Data cache
vfp0 at cpu0: VFP11
vfp0: mvfr: [0]=0x11111111 [1]=0
obio0 at mainbus0
bcmicu0 at obio0
bcmmbox0 at obio0: VC mailbox
vcmbox0 at bcmmbox0
bcmtmr0 at obio0 intr 3: VC System Timer
vchiq0 at obio0 intr 66: BCM2835 VCHIQ
bcmpm0 at obio0: Power management, Reset and Watchdog controller
bcmrng0 at obio0: RNG
plcom0 at obio0 intr 57
plcom0: txfifo disabled
plcom0: console
genfb0 at obio0: switching to framebuffer console
genfb0: framebuffer at 0xc006000, size 1600x1200, depth 32, stride 6400
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (default, vt100 emulation)
sdhc0 at obio0 intr 62: SDHC controller
sdhc0: interrupting on intr 62
sdhc0: SD Host Specification 3.0, rev.153
sdmmc0 at sdhc0 slot 0
dotg0 at obio0 intr 9: USB controller
bcmspi0 at obio0 intr 54: SPI
spi0 at bcmspi0: SPI bus
bsciic0 at obio0 intr 53: BSC0
iic0 at bsciic0: I2C bus
bsciic1 at obio0 intr 53: BSC1
iic1 at bsciic1: I2C bus
usb0 at dotg0: USB revision 2.0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "bcmtmr0" frequency 1000000 Hz quality 100
WARNING: module error: vfs load failed for `usbverbose', error 45
uhub0 at usb0WARNING: module error: vfs load failed for `usbverbose', 
error 45
: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
ld0 at sdmmc0: <0x03:0x5344:SU08G:0x80:0x025c67eb:0x0c6>
ld0: 7580 MB, 3850 cyl, 64 head, 63 sec, 512 bytes/sect x 15523840 sectors
ld0: 4-bit width, bus clock 50.000 MHz
WARNING: module error: vfs load failed for `usbverbose', error 45
WARNING: module error: vfs load failed for `usbverbose', error 45
uhub1 at uhub0 port 1WARNING: module error: vfs load failed for 
`usbverbose', error 45
WARNING: module error: vfs load failed for `usbverbose', error 45
: vendor 0x0424 product 0x9512, class 9/0, rev 2.00/2.00, addr 2
uhub1: multiple transaction translators
uhub1: 3 ports with 2 removable, self powered
WARNING: module error: vfs load failed for `usbverbose', error 45
WARNING: module error: vfs load failed for `usbverbose', error 45
usmsc0 at uhub1 port 1
WARNING: module error: vfs load failed for `usbverbose', error 45
WARNING: module error: vfs load failed for `usbverbose', error 45
usmsc0: vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3
usmsc0:  Ethernet address b8:27:eb:f4:84:64
ukphy0 at usmsc0 phy 1WARNING: module error: vfs load failed for 
`miiverbose', error 45
: OUI 0x00800f, model 0x000c, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
boot device: ld0
root on ld0a dumps on ld0b
mountroot: trying nfs...
mountroot: trying msdos...
mountroot: trying ext2fs...
mountroot: trying ffs...
/: replaying log to memory
root file system type: ffs
vchiq: local ver 6 (min 3), remote ver 6.
vcaudio0 at vchiq0: AUDS
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
audio0 at vcaudio0: half duplex, playback, capture, independent
init: copying out path `/sbin/init' 11
/: replaying log to disk
WARNING: module error: vfs load failed for `compat', error 78
WARNING: module error: vfs load failed for `compat', error 78
WARNING: module error: vfs load failed for `compat', error 78
WARNING: module error: vfs load failed for `compat', error 78
WARNING: module error: vfs load failed for `compat', error 78
WARNING: module error: vfs load failed for `compat', error 78
WARNING: module error: vfs load failed for `com', error 78
WARNING: module error: vfs load failed for `com', error 78
usmsc0: link state UP (was UNKNOWN)
usmsc0: link state DOWN (was UP)
WARNING: module error: vfs load failed for `compat', error 78
WARNING: module error: vfs load failed for `compat', error 78
usmsc0: link state UP (was DOWN)
WARNING: module error: vfs load failed for `compat', error 78
WARNING: module error: vfs load failed for `compat', error 78
WARNING: module error: vfs load failed for `compat', error 78
wsdisplay0: screen 4 added (default, vt100 emulation)
usbd_get_string: getting lang failed, using 0
axe0 at uhub1 port 2
axe0: vendor 0x2001 product 0x3c05, rev 2.00/0.01, addr 4
axe0: Ethernet address 00:80:c8:3b:ea:e4
ukphy1 at axe0 phy 3: OUI 0x0009c3, model 0x0005, rev. 4
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
axe0: link state DOWN (was UNKNOWN)
ukphy1: detached
axe0: detached
axe0: at uhub1 port 2 (addr 4) disconnected
usbd_get_string: getting lang failed, using 0
axe0 at uhub1 port 2
axe0: vendor 0x2001 product 0x3c05, rev 2.00/0.01, addr 4
axe0: Ethernet address 00:80:c8:3b:ea:e4
ukphy1 at axe0 phy 3: OUI 0x0009c3, model 0x0005, rev. 4
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
axe0: link state DOWN (was UNKNOWN)
ukphy1: detached
axe0: detached
axe0: at uhub1 port 2 (addr 4) disconnected
usbd_get_string: getting lang failed, using 0
axe0 at uhub1 port 2
axe0: vendor 0x2001 product 0x3c05, rev 2.00/0.01, addr 4
axe0: Ethernet address 00:80:c8:3b:ea:e4
ukphy1 at axe0 phy 3: OUI 0x0009c3, model 0x0005, rev. 4
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
axe0: link state DOWN (was UNKNOWN)
ukphy1: detached
axe0: detached
axe0: at uhub1 port 2 (addr 4) disconnected
usbd_get_string: getting lang failed, using 0
axe0 at uhub1 port 2
axe0: vendor 0x2001 product 0x3c05, rev 2.00/0.01, addr 4
axe0: Ethernet address 00:80:c8:3b:ea:e4
ukphy1 at axe0 phy 3: OUI 0x0009c3, model 0x0005, rev. 4
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
axe0: link state DOWN (was UNKNOWN)
ukphy1: detached
axe0: detached
axe0: at uhub1 port 2 (addr 4) disconnected
usbd_get_string: getting lang failed, using 0
axe0 at uhub1 port 2
axe0: vendor 0x2001 product 0x3c05, rev 2.00/0.01, addr 4
axe0: Ethernet address 00:80:c8:3b:ea:e4
ukphy1 at axe0 phy 3: OUI 0x0009c3, model 0x0005, rev. 4
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
axe0: link state DOWN (was UNKNOWN)
ukphy1: detached
axe0: detached
axe0: at uhub1 port 2 (addr 4) disconnected
usbd_get_string: getting lang failed, using 0
axe0 at uhub1 port 2
axe0: vendor 0x2001 product 0x3c05, rev 2.00/0.01, addr 4
axe0: Ethernet address 00:80:c8:3b:ea:e4
ukphy1 at axe0 phy 3: OUI 0x0009c3, model 0x0005, rev. 4
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy1: detached
axe0: detached
axe0: at uhub1 port 2 (addr 4) disconnected
usbd_get_string: getting lang failed, using 0
axe0 at uhub1 port 2
axe0: vendor 0x2001 product 0x3c05, rev 2.00/0.01, addr 4
axe0: Ethernet address 00:80:c8:3b:ea:e4
ukphy1 at axe0 phy 3: OUI 0x0009c3, model 0x0005, rev. 4
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
axe0: link state DOWN (was UNKNOWN)
ukphy1: detached
axe0: detached
axe0: at uhub1 port 2 (addr 4) disconnected
usbd_get_string: getting lang failed, using 0
axe0 at uhub1 port 2
axe0: vendor 0x2001 product 0x3c05, rev 2.00/0.01, addr 4
axe0: Ethernet address 00:80:c8:3b:ea:e4
axe0: read PHY failed
ukphy1 at axe0 phy 3: OUI 0xfcffff, model 0x003f, rev. 15
axe0: write PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
axe0: read PHY failed
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 100baseT4, 
1000baseSX, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX, auto
ukphy1: detached
axe0: detached
axe0: at uhub1 port 2 (addr 4) disconnected
usmsc0: link state DOWN (was UP)
usmsc0: link state UP (was DOWN)