Port-amiga archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: Installing NetBSD1.32 without install script



On 13-Oct-98, Ignatios Souvatzis wrote:
> On Mon, Oct 12, 1998 at 04:15:45PM -0700, Allen Wittenauer wrote:
> > 
> > 
> > 
> > > >  I only can guess from your description that you might have
> > > > no FPU at all, which makes the very first programm accessing the FPU
> > > > to crash. Normally this would be "fsck", in your case it is possibly
> > > > "zcat". NetBSD/Amiga does support Non-FPU environments, but I am not
> > > > sure about the supplied GENERIC kernel.
> > > 
> > > some of them. To be precise: 68020 and 68030 ones. _NOT_ 68LC040
> > > or 68LC060, currently. This is clearly stated in the INSTALL document
> > > near the top, so you can't sue me :-).
> > 
> > I have the same problems, but with an A4060T.  I didn't think the QuickPak
> > card used a 68LC060... but, then again, my SCSI bus appears to hang on me.
> > 
> > I've noticed that if I do a manual install (ie, booting to single user
mode,
> > and doing the mounts, ifconfigs, etc) that I can get a LOT farther...
> > 
> No comment, unless you give full information.

> E.g., as you make it that far, the kernel itself should tell you what kind
> of CPU you have.

> -is

Hello,
Amiga 3000 with Microbotics 8up Ram card (with 8meg on it) 4meg on the mother
board and 2 chip ram. EGS specturm card.

First off netbsd will crash when i try and boot the kernel unless i use the
-pZ options for loadbsd. Wich only gives me 4meg of fast ram, 2 of wich the
Specturm card uses. 

Secondly when i boot up netbsd the netbsd install script crashes right when
its supposed to be extracting the sets. (I know this from going through the
install script myself)

Thirdly I did try pulling the Ram card and netbsd would boot without the -pZ
options, but would still crash when trying to extract the sets.

As for the memory problem, I hope i could use that 8 meg on the board by
making my own kernel? but the first priority is installing netbsd1.3.2

Thank you,
Ben Bogart




Home | Main Index | Thread Index | Old Index