NetBSD-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: I2C trackpad support?

To: netbsd-users%netbsd.org@localhost
Subject: Re: I2C trackpad support?
From: Vincent DEFERT <20.100%defert.com@localhost>
Date: Sat, 2 May 2020 19:47:45 +0200

I run NetBSD 9.0 amd64 GENERIC_KASLR on a Lenovo Ideapad 120S-14IAP
Here is the output of dmesg:

[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,2003, 2004, 2005,[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,2014, 2015, 2016, 2017,[ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. Allrights reserved.

[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993

[ 1.000000] The Regents of the University of California. Allrights reserved.


[     1.000000] NetBSD 9.0 (GENERIC_KASLR) #0: Fri Feb 14 00:06:28 UTC 2020

[ 1.000000]mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC_KASLR

[     1.000000] total memory = 3726 MB
[     1.000000] avail memory = 3552 MB
[     1.000000] cpu_rng: RDSEED
[     1.000000] rnd: seeded with 256 bits
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[     1.000000] RTC BIOS diagnostic error 0x80<clock_battery>

[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hzquality 100

[     1.000003] LENOVO 81A5 (Lenovo ideapad 120S-14IAP)
[     1.000003] mainbus0 (root)
[     1.000003] ACPI: RSDP 0x00000000000F0140 000024 (v02 LENOVO)

[ 1.000003] ACPI: XSDT 0x0000000079328188 0000FC (v01 LENOVOCB-01 00000003 PTEC 00000002)[ 1.000003] ACPI: FACP 0x0000000079340000 00010C (v05 LENOVOCB-01 00000003 PTEC 00000002)[ 1.000003] Firmware Warning (ACPI): 32/64X length mismatch inFADT/Pm1aEventBlock: 32/16 (20190405/tbfadt-642)[ 1.000003] Firmware Warning (ACPI): Invalid length forFADT/Pm1aEventBlock: 16, using default 32 (20190405/tbfadt-745)[ 1.000003] ACPI: DSDT 0x0000000079330000 008304 (v02 LENOVOEDK2 00000003 BRXT 0100000D)

[     1.000003] ACPI: FACS 0x00000000792F2000 000040

[ 1.000003] ACPI: SSDT 0x0000000079346000 0003CC (v02 LENOVOTpm2Tabl 00001000 INTL 20150818)[ 1.000003] ACPI: TPM2 0x0000000079345000 000034 (v03 LENOVOCB-01 00000000 PTEC 00000002)[ 1.000003] ACPI: UEFI 0x00000000792F6000 000042 (v01 LENOVOCB-01 00000002 PTEC 00000002)[ 1.000003] ACPI: BDAT 0x0000000079344000 000030 (v02 LENOVOCB-01 00000000 PTEC 00000002)[ 1.000003] ACPI: DBG2 0x0000000079343000 000072 (v00 LENOVOCB-01 00000003 PTEC 00000002)[ 1.000003] ACPI: DBGP 0x0000000079342000 000034 (v01 LENOVOCB-01 00000003 PTEC 00000002)[ 1.000003] ACPI: HPET 0x000000007933F000 000038 (v01 LENOVOCB-01 00000003 PTEC 00000002)[ 1.000003] ACPI: LPIT 0x000000007933E000 00005C (v01 LENOVOCB-01 00000003 PTEC 00000002)[ 1.000003] ACPI: APIC 0x000000007933D000 000084 (v03 LENOVOCB-01 00000003 PTEC 00000002)[ 1.000003] ACPI: MCFG 0x000000007933C000 00003C (v01 LENOVOCB-01 00000003 PTEC 00000002)[ 1.000003] ACPI: NPKT 0x000000007933B000 000065 (v01 LENOVOCB-01 00000003 PTEC 00000002)[ 1.000003] ACPI: PRAM 0x000000007933A000 000030 (v01 LENOVOCB-01 00000003 PTEC 00000002)[ 1.000003] ACPI: WSMT 0x0000000079339000 000028 (v01 LENOVOCB-01 00000003 PTEC 00000002)[ 1.000003] ACPI: SSDT 0x000000007932E000 0012F8 (v02 LENOVODptfTab 00000003 BRXT 0100000D)[ 1.000003] ACPI: SSDT 0x000000007932D000 0001E8 (v01 LENOVOPlatform 00001000 INTL 20150818)[ 1.000003] ACPI: BATB 0x000000007932C000 00004A (v02 LENOVOCB-01 00000000 PTEC 00000002)[ 1.000003] ACPI: SSDT 0x000000007932B000 000400 (v02 LENOVOCpu0Ist 00003000 INTL 20150818)[ 1.000003] ACPI: SSDT 0x000000007932A000 00072B (v02 LENOVOCpuSsdt 00003000 INTL 20150818)[ 1.000003] ACPI: SSDT 0x0000000079329000 00032D (v02 LENOVOCpu0Tst 00003000 INTL 20150818)[ 1.000003] ACPI: SSDT 0x0000000079347000 00017C (v02 LENOVOApTst 00003000 INTL 20150818)[ 1.000003] ACPI: MSDM 0x0000000079327000 000055 (v03 LENOVOCB-01 00000000 PTEC 00000002)[ 1.000003] ACPI: SSDT 0x0000000079324000 002760 (v02 LENOVOSaSsdt 00003000 INTL 20150818)[ 1.000003] ACPI: FPDT 0x0000000079323000 000044 (v01 LENOVOCB-01 00000002 PTEC 00000002)[ 1.000003] ACPI: BGRT 0x0000000079322000 000038 (v01 LENOVOCB-01 00000002 PTEC 00000002)[ 1.000003] ACPI: WDAT 0x0000000079341000 000104 (v01 LENOVOCB-01 00000000 PTEC 00000002)[ 1.000003] ACPI: UEFI 0x00000000792ED000 00017A (v01 LENOVOCB-01 00000001 PTEC 00000002)

[     1.000003] ACPI: 9 ACPI AML tables successfully acquired and loaded

[ 1.000003] ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20,120 pins

[     1.000003] cpu0 at mainbus0 apid 0
[     1.000003] cpu0: Intel(R) Pentium(R) CPU N4200 @ 1.10GHz, id 0x506c9
[     1.000003] cpu0: package 0, core 0, smt 0
[     1.000003] cpu1 at mainbus0 apid 2
[     1.000003] cpu1: Intel(R) Pentium(R) CPU N4200 @ 1.10GHz, id 0x506c9
[     1.000003] cpu1: package 0, core 1, smt 0
[     1.000003] cpu2 at mainbus0 apid 4
[     1.000003] cpu2: Intel(R) Pentium(R) CPU N4200 @ 1.10GHz, id 0x506c9
[     1.000003] cpu2: package 0, core 2, smt 0
[     1.000003] cpu3 at mainbus0 apid 6
[     1.000003] cpu3: Intel(R) Pentium(R) CPU N4200 @ 1.10GHz, id 0x506c9
[     1.000003] cpu3: package 0, core 3, smt 0
[     1.000003] acpi0 at mainbus0: Intel ACPICA 20190405

[ 1.000003] acpi0: X/RSDT: OemId <LENOVO,CB-01 ,00000003>, AslId<PTEC,00000002>[ 1.000003] ACPI Error: No handler for Region [ECF2](0xffff915bcfd81b40) [EmbeddedControl] (20190405/evregion-183)[ 1.000003] ACPI Error: Region EmbeddedControl (ID=3) has no handler(20190405/exfldio-323)[ 1.000003] ACPI Error: Aborting method\_SB.PCI0.LPCB.H_EC.BAT1._STA due to previous error (AE_NOT_EXIST)(20190405/psparse-581)

[     1.000003] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000e0000000
[     1.000003] ACPI: Dynamic OEM Table Load:

[ 1.000003] ACPI: SSDT 0xFFFF915B5794B248 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20150818)

[     1.000003] ACPI: Dynamic OEM Table Load:

[ 1.000003] ACPI: SSDT 0xFFFF915B579B5048 00015F (v02 PmRef ApIst 00003000 INTL 20150818)

[     1.000003] ACPI: Dynamic OEM Table Load:

[ 1.000003] ACPI: SSDT 0xFFFF915B57991198 00008D (v02 PmRef ApCst 00003000 INTL 20150818)

[     1.000003] acpi0: SCI interrupting at int 9
[     1.000003] acpi0: fixed power button present

[ 1.000003] timecounter: Timecounter "ACPI-Fast" frequency 3579545Hz quality 1000[ 1.002322] hpet0 at acpi0: high precision event timer (mem0xfed00000-0xfed00400)[ 1.002322] timecounter: Timecounter "hpet0" frequency 19200000 Hzquality 2000

[     1.002653] acpiec0 at acpi0 (H_EC, PNP0C09-1): io 0x62,0x66
[     1.002653] acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
[     1.002653] acpibat0: ACPI 4.0 functionality present
[     1.002653] VPC0 (VPC2004) at acpi0 not configured
[     1.002653] acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
[     1.002653] LDRC (PNP0C02) at acpi0 not configured

[ 1.002653] attimer1 at acpi0 (TIMR, PNP0100): io0x40-0x43,0x50-0x53 irq 0[ 1.002653] pckbc1 at acpi0 (PS2K, MSFT0001-0) (kbd port): io0x60,0x64 irq 1

[     1.002653] TPD0 (ELAN060F) at acpi0 not configured
[     1.002653] PDRC (PNP0C02) at acpi0 not configured
[     1.002653] acpivga0 at acpi0 (GFX0): ACPI Display Adapter

[ 1.002653] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display OutputDevice[ 1.002653] acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display OutputDevice[ 1.002653] acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display OutputDevice[ 1.002653] acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display OutputDevice[ 1.002653] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display OutputDevice[ 1.002653] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display OutputDevice[ 1.002653] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display OutputDevice[ 1.002653] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display OutputDevice[ 1.002653] acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display OutputDevice[ 1.002653] acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display OutputDevice[ 1.002653] acpiout10 at acpivga0 (DD0B, 0x000b): ACPI DisplayOutput Device[ 1.002653] acpiout11 at acpivga0 (DD0C, 0x000c): ACPI DisplayOutput Device[ 1.002653] acpiout12 at acpivga0 (DD0D, 0x000d): ACPI DisplayOutput Device[ 1.002653] acpiout13 at acpivga0 (DD0E, 0x000e): ACPI DisplayOutput Device[ 1.002653] acpiout14 at acpivga0 (DD0F, 0x000f): ACPI DisplayOutput Device[ 1.002653] acpiout15 at acpivga0 (DD1F, 0x0400): ACPI DisplayOutput Device

[     1.002653] acpiout15: brightness levels: [1-100]

[ 1.002653] acpiout16 at acpivga0 (IPU0, 0x34d7): ACPI DisplayOutput Device[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout0[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout1[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout2[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout3[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout4[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout5[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout6[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout7[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout8[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout9[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout10[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout11[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout12[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout13[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout14[ 1.002653] acpivga0: autoconfiguration error: unknown output deviceacpiout16

[     1.002653] acpivga0: connected output devices:

[ 1.002653] acpivga0: 0x0400 (acpiout15): Unknown Output Device,head 0

[     1.002653] acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
[     1.002653] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[     1.002653] GPO0 (INT3452) at acpi0 not configured
[     1.002653] GPO1 (INT3452) at acpi0 not configured
[     1.002653] GPO2 (INT3452) at acpi0 not configured
[     1.002653] GPO3 (INT3452) at acpi0 not configured
[     1.002653] PEPD (INT33A1) at acpi0 not configured
[     1.002653] TPM (MSFT0101) at acpi0 not configured
[     1.002653] IETM (INT3400) at acpi0 not configured
[     1.002653] TDSP (INT3406) at acpi0 not configured
[     1.002653] SEN1 (INT3403) at acpi0 not configured
[     1.002653] CHRG (INT3403) at acpi0 not configured
[     1.002653] acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
[     1.002653] acpifan0: autoconfiguration error: failed to initialize
[     1.002653] acpitz0 at acpi0 (TZ01): cpu0
[     1.002653] acpitz0: active cooling level 0: 60.0C
[     1.002653] acpitz0: levels: critical 100.0 C, passive 95.0 C
[     1.002653] ACPI: Enabled 5 GPEs in block 00 to 7F
[     1.002653] pckbd0 at pckbc1 (kbd slot)
[     1.002653] pckbc1: using irq 1 for kbd slot
[     1.002653] wskbd0 at pckbd0: console keyboard
[     1.002653] pci0 at mainbus0 bus 0: configuration mode 1

[ 1.002653] pci0: i/o space, memory space enabled, rd/line, rd/mult,wr/inv ok[ 1.002653] pchb0 at pci0 dev 0 function 0: vendor 8086 product 5af0(rev. 0x0b)[ 1.002653] vendor 8086 product 5a8c (miscellaneous DASP, revision0x0b) at pci0 dev 0 function 1 not configured

[     1.002653] i915drmkms: preliminary hardware support disabled

[ 1.002653] vga0 at pci0 dev 2 function 0: vendor 8086 product 5a84(rev. 0x0b)[ 1.002653] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100emulation), using wskbd0

[     1.002653] wsmux1: connecting to wsdisplay0
[     1.002653] drm at vga0 not configured
[     1.002653] hdaudio0 at pci0 dev 14 function 0: HD Audio Controller
[     1.002653] hdaudio0: interrupting at msi0 vec 0
[     1.002653] hdafg0 at hdaudio0: vendor 10ec product 0269
[     1.002653] hdafg0: DAC00 2ch: Speaker [Built-In]
[     1.002653] hdafg0: DAC01 2ch: HP Out [Jack]
[     1.002653] hdafg0: ADC02 2ch: Mic In [Jack]
[     1.002653] hdafg0: ADC03 2ch: Mic In [Built-In]

[ 1.002653] hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz192000Hz PCM16 PCM20 PCM24 AC3[ 1.002653] audio0 at hdafg0: playback, capture, full duplex,independent

[     1.002653] audio0: slinear_le:16 2ch 48000Hz, blk 4ms for playback
[     1.002653] audio0: slinear_le:16 2ch 48000Hz, blk 4ms for recording
[     1.002653] spkr0 at audio0: PC Speaker (synthesized)
[     1.002653] wsbell at spkr0 not configured
[     1.002653] hdafg1 at hdaudio0: vendor 8086 product 280a
[     1.002653] hdafg1: DP00 8ch: Digital Out [Jack]
[     1.002653] hdafg1: 8ch/0ch 48000Hz PCM16*

[ 1.002653] vendor 8086 product 5a9a (miscellaneous communications,revision 0x0b) at pci0 dev 15 function 0 not configured[ 1.002653] ahcisata0 at pci0 dev 18 function 0: vendor 8086 product5ae3 (rev. 0x0b)

[     1.002653] ahcisata0: 64-bit DMA

[ 1.002653] ahcisata0: AHCI revision 1.31, 2 ports, 32 slots, CAP0xe536ff01<PSC,SSC,PMD,SPM,SAM,ISS=0x3=Gen3,SCLO,SALP,SSNTF,SNCQ,S64A>

[     1.002653] ahcisata0: interrupting at msi1 vec 0
[     1.002653] atabus0 at ahcisata0 channel 0
[     1.002653] atabus1 at ahcisata0 channel 1

[ 1.002653] ppb0 at pci0 dev 20 function 0: vendor 8086 product 5ad6(rev. 0xfb)[ 1.002653] ppb0: PCI Express capability version 2 <Root Port ofPCI-E Root Complex> x1 @ 5.0GT/s

[     1.002653] ppb0: link is x1 @ 2.5GT/s
[     1.002653] pci1 at ppb0 bus 1
[     1.002653] pci1: i/o space, memory space enabled

[ 1.002653] rtsx0 at pci1 dev 0 function 0: vendor 10ec product 5229(rev. 0x01)

[     1.002653] rtsx0: interrupting at msi2 vec 0
[     1.002653] sdmmc0 at rtsx0

[ 1.002653] ppb1 at pci0 dev 20 function 1: vendor 8086 product 5ad7(rev. 0xfb)[ 1.002653] ppb1: PCI Express capability version 2 <Root Port ofPCI-E Root Complex> x1 @ 5.0GT/s

[     1.002653] ppb1: link is x1 @ 2.5GT/s
[     1.002653] pci2 at ppb1 bus 2
[     1.002653] pci2: i/o space, memory space enabled

[ 1.002653] iwm0 at pci2 dev 0 function 0: vendor 8086 product 3166(rev. 0x99)

[     1.002653] iwm0: interrupting at msi3 vec 0

[ 1.002653] xhci0 at pci0 dev 21 function 0: vendor 8086 product5aa8 (rev. 0x0b)

[     1.002653] xhci0: interrupting at msi4 vec 0
[     1.002653] xhci0: xHCI version 1.0
[     1.002653] usb0 at xhci0: USB revision 3.0
[     1.002653] usb1 at xhci0: USB revision 2.0

[ 1.002653] vendor 8086 product 5aac (miscellaneous DASP, revision0x0b) at pci0 dev 22 function 0 not configured[ 1.002653] vendor 8086 product 5ab0 (miscellaneous DASP, revision0x0b) at pci0 dev 22 function 2 not configured[ 1.002653] sdhc0 at pci0 dev 28 function 0: vendor 8086 product5acc (rev. 0x0b)

[     1.002653] sdhc0: interrupting at ioapic0 pin 39

[ 1.002653] sdhc0: SDHC 3.0, rev 16, SDMA, 200000 kHz, embeddedslot, HS SDR50 DDR50 SDR104 HS200 1.8V, re-tuning mode 1 (128s timer),2048 byte blocks

[     1.002653] sdmmc1 at sdhc0 slot 0

[ 1.002653] pcib0 at pci0 dev 31 function 0: vendor 8086 product5ae8 (rev. 0x0b)[ 1.002653] ichsmb0 at pci0 dev 31 function 1: vendor 8086 product5ad4 (rev. 0x0b)

[     1.002653] ichsmb0: interrupting at ioapic0 pin 20
[     1.002653] iic0 at ichsmb0: I2C bus
[     1.002653] isa0 at pcib0
[     1.002653] pcppi0 at isa0 port 0x61
[     1.002653] spkr1 at pcppi0: PC Speaker
[     1.002653] wsbell at spkr1 not configured
[     1.002653] midi0 at pcppi0: PC speaker
[     1.002653] sysbeep0 at pcppi0
[     1.002653] attimer1: attached to pcppi0
[     1.002653] acpicpu0 at cpu0: ACPI CPU

[ 1.002653] acpicpu0: autoconfiguration error: failed to addC-state: AE_SUPPORT[ 1.002653] acpicpu0: autoconfiguration error: failed to addC-state: AE_SUPPORT

[     1.002653] acpicpu0: C1: HLT, lat   1 us, pow  1000 mW

[ 1.002653] acpicpu0: P0: FFH, lat 10 us, pow 0 mW, 1101 MHz,turbo boost

[     1.002653] acpicpu0: P1: FFH, lat  10 us, pow     0 mW, 1100 MHz
[     1.002653] acpicpu0: P2: FFH, lat  10 us, pow     0 mW, 1000 MHz
[     1.002653] acpicpu0: P3: FFH, lat  10 us, pow     0 mW,  900 MHz
[     1.002653] acpicpu0: P4: FFH, lat  10 us, pow     0 mW,  800 MHz
[     1.002653] acpicpu0: T0: FFH, lat   1 us, pow     0 mW, 100 %
[     1.002653] acpicpu0: T1: FFH, lat   1 us, pow     0 mW,  88 %
[     1.002653] acpicpu0: T2: FFH, lat   1 us, pow     0 mW,  75 %
[     1.002653] acpicpu0: T3: FFH, lat   1 us, pow     0 mW,  63 %
[     1.002653] acpicpu0: T4: FFH, lat   1 us, pow     0 mW,  50 %
[     1.002653] acpicpu0: T5: FFH, lat   1 us, pow     0 mW,  38 %
[     1.002653] acpicpu0: T6: FFH, lat   1 us, pow     0 mW,  25 %
[     1.002653] acpicpu0: T7: FFH, lat   1 us, pow     0 mW,  13 %
[     1.002653] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
[     1.002653] acpicpu1 at cpu1: ACPI CPU

[ 1.002653] acpicpu1: autoconfiguration error: failed to addC-state: AE_SUPPORT[ 1.002653] acpicpu1: autoconfiguration error: failed to addC-state: AE_SUPPORT

[     1.002653] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
[     1.002653] acpicpu2 at cpu2: ACPI CPU

[ 1.002653] acpicpu2: autoconfiguration error: failed to addC-state: AE_SUPPORT[ 1.002653] acpicpu2: autoconfiguration error: failed to addC-state: AE_SUPPORT

[     1.002653] coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=105
[     1.002653] acpicpu3 at cpu3: ACPI CPU

[ 1.002653] acpicpu3: autoconfiguration error: failed to addC-state: AE_SUPPORT[ 1.002653] acpicpu3: autoconfiguration error: failed to addC-state: AE_SUPPORT

[     1.002653] coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=105

[ 1.002653] timecounter: Timecounter "clockinterrupt" frequency 100Hz quality 0[ 1.438710] timecounter: Timecounter "TSC" frequency 1094738890 Hzquality 3000[ 1.443653] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class9/0, rev 3.00/1.00, addr 0

[     1.443653] uhub0: 7 ports with 7 removable, self powered

[ 1.443653] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class9/0, rev 2.00/1.00, addr 0

[     1.443653] uhub1: 8 ports with 8 removable, self powered
[     1.548883] acpiacad0: AC adapter online.
[     1.548883] sdhc0: cmd timeout error
[     1.598965] sdmmc1: sdmmc_mem_enable failed with error 60
[     1.608981] sdmmc1: autoconfiguration error: couldn't enable card: 60
[     1.729175] ahcisata0 port 1: device present, speed: 6.0Gb/s
[     1.729175] sdhc0: cmd timeout error
[     1.769240] sdmmc1: sdmmc_mem_enable failed with error 60
[     1.779256] sdmmc1: autoconfiguration error: couldn't enable card: 60
[     1.789273] IPsec: Initialized Security Association Processing.
[     1.799295] acpibat0: LENOVO LiP rechargeable battery

[ 1.799295] acpibat0: granularity: low->warn 0.043 Ah, warn->full0.064 Ah

[     2.750832] ahcisata0 port 0: PHY offline
[     3.151480] umass0 at uhub0 port 2 configuration 1 interface 0

[ 3.151480] umass0: JMicron (0x152d) USB to ATA/ATAPI Bridge(0x578), rev 3.00/1.00, addr 1

[     3.151480] umass0: using SCSI over Bulk-Only
[     3.151480] scsibus0 at umass0: 2 targets, 1 lun per target

[ 3.151480] sd0 at scsibus0 target 0 lun 0: <JMicron, Generic, 8101>disk fixed

[     3.171512] sd0: fabricating a geometry

[ 3.171512] sd0: 232 GB, 238475 cyl, 64 head, 32 sec, 512 bytes/sectx 488397168 sectors

[     3.171512] ubt0 at uhub1 port 7

[ 3.171512] ubt0: vendor 8087 (0x8087) product 0a2a (0xa2a), rev2.00/0.01, addr 2

[     3.181529] sd0: fabricating a geometry
[     3.291708] wd0 at atabus1 drive 0
[     3.291708] wd0: <WDC WDS500G2B0B-00YS70>
[     3.291708] wd0: drive supports 1-sector PIO transfers, LBA48 addressing

[ 3.291708] wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sectx 976773168 sectors

[     3.291708] wd0: GPT GUID: 197926d2-e829-11e9-bcde-b7740b3aebd7
[     3.291708] dk0 at wd0: "efiboot0", 409600 blocks at 40, type: msdos
[     3.291708] dk1 at wd0: "root", 62500000 blocks at 411648, type: ext2fs

[ 3.291708] dk2 at wd0: "swap", 7811072 blocks at 62912512, type:<unknown>[ 3.291708] dk3 at wd0: "home", 906047488 blocks at 70723584, type:ext2fs[ 3.291708] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMAmode 6 (Ultra/133), NCQ (32 tags)[ 3.291708] wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2,Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)[ 4.103021] uvideo0 at uhub1 port 8 configuration 1 interface 0:Bison (0x5986) EasyCamera (0x112b), rev 2.00/53.03, addr 3[ 4.103021] video0 at uvideo0: Bison (0x5986) EasyCamera (0x112b),rev 2.00/53.03, addr 3[ 4.133069] WARNING: 27 errors while detecting hardware; checksystem log.

[     4.133069] boot device: sd0
[     4.133069] root on sd0a dumps on sd0b
[     4.133069] root file system type: ffs
[     4.133069] kern.module.path=/stand/amd64/9.0/modules

[ 4.163120] iwm0: hw rev 0x210, fw ver 22.361476.0, addressbc:a8:a6:fa:d5:b1[ 4.163120] iwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps48Mbps 54Mbps

[     4.163120] iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps

[ 4.173167] iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps

[    13.558336] wsdisplay0: screen 1 added (80x25, vt100 emulation)
[    13.568352] wsdisplay0: screen 2 added (80x25, vt100 emulation)
[    13.568352] wsdisplay0: screen 3 added (80x25, vt100 emulation)
[    13.568352] wsdisplay0: screen 4 added (80x25, vt100 emulation)
[    37.483841] umass1 at uhub0 port 5 configuration 1 interface 0

[ 37.483841] umass1: Philips (0x13fe) USB Flash Drive (0x6300), rev3.20/1.10, addr 4

[    37.483841] umass1: using SCSI over Bulk-Only
[    37.483841] scsibus1 at umass1: 2 targets, 1 lun per target

[ 37.483841] sd1 at scsibus1 target 0 lun 0: <Philips, USB FlashDrive, PMAP> disk removable

[    37.483841] sd1: fabricating a geometry

[ 37.483841] sd1: 59064 MB, 59064 cyl, 64 head, 32 sec, 512bytes/sect x 120963072 sectors

[    37.493861] sd1: fabricating a geometry


On 02/05/2020 18:19, Manuel Bouyer wrote:

On Sat, May 02, 2020 at 06:11:38PM +0200, Vincent DEFERT wrote:

I have installed GENERIC_KASLR, could this be the reason I don't see it?

It shouldn't.

But you don't mention which NetBSD version you're running, and on which
hardware.
Also posting the dmesg could help.

Follow-Ups:
- Re: I2C trackpad support?
  - From: Manuel Bouyer

References:
- I2C trackpad support?
  - From: Vincent DEFERT
- Re: I2C trackpad support?
  - From: Manuel Bouyer
- Re: I2C trackpad support?
  - From: Vincent DEFERT
- Re: I2C trackpad support?
  - From: Manuel Bouyer
- Re: I2C trackpad support?
  - From: Vincent DEFERT
- Re: I2C trackpad support?
  - From: Manuel Bouyer

Prev by Date: Re: I2C trackpad support?
Next by Date: listing "commit comments" in CVS
Previous by Thread: Re: I2C trackpad support?
Next by Thread: Re: I2C trackpad support?
Indexes:

Home | Main Index | Thread Index | Old Index