Suspend to RAM failes

[Carsten Kunze <carsten.kunze%arcor.de@localhost>]

Hello,

sysctl -w hw.acpi.sleep.state=3

failes with

acpi0: entering state S3
Devices without power management support: hdaudio0
acpi0: aborting suspend

Above in dmesg is found:

hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdaudio0: timeout leaving reset state
hdaudio0: device driver failed to attach

A similar problem was discussed in https://mail-index.netbsd.org/netbsd-users/2011/12/07/msg009717.html

Is it somehow possible to handle this without compiling the kernel?  E.g. by manually remove hdaudio0 or force the suspend somehow?

--Carsten

dmesg:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.42 (GENERIC.201611250700Z)
total memory = 8097 MB
avail memory = 7842 MB
cpu_rng: RDRAND
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. Latitude E6540 (01)
mainbus0 (root)
ACPI: RSDP 0x00000000000EF980 000024 (v02 DELL  )
ACPI: XSDT 0x00000000C8FD3098 0000B4 (v01 DELL   CBX3     01072009 AMI  00010013)
ACPI: FACP 0x00000000C8FE4AF0 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
ACPI: DSDT 0x00000000C8FD31E0 01190D (v02 DELL   CBX3     00000014 INTL 20120711)
ACPI: FACS 0x00000000CA7ED080 000040
ACPI: APIC 0x00000000C8FE4C00 000072 (v03 DELL   CBX3     01072009 AMI  00010013)
ACPI: FPDT 0x00000000C8FE4C78 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
ACPI: SLIC 0x00000000C8FE4CC0 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
ACPI: LPIT 0x00000000C8FE4E38 00005C (v01 DELL   CBX3     00000000 AMI. 00000005)
ACPI: SSDT 0x00000000C8FE4E98 000228 (v01 INTEL  sensrhub 00000000 INTL 20120711)
ACPI: SSDT 0x00000000C8FE50C0 000160 (v01 Intel  zpodd    00001000 INTL 20120711)
ACPI: SSDT 0x00000000C8FE5220 00051F (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
ACPI: SSDT 0x00000000C8FE5740 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
ACPI: HPET 0x00000000C8FE6218 000038 (v01 DELL   CBX3     01072009 AMI. 00000005)
ACPI: SSDT 0x00000000C8FE6250 0003D2 (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: MCFG 0x00000000C8FE6628 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
ACPI: SSDT 0x00000000C8FE6668 001044 (v01 SgRef  SgPeg    00001000 INTL 20120711)
ACPI: ASF! 0x00000000C8FE76B0 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: SSDT 0x00000000C8FE7758 000589 (v01 AMITCG PROC     00000001 INTL 20120711)
ACPI: DMAR 0x00000000C8FE7CE8 0000B0 (v01 INTEL  HSW      00000001 INTL 00000001)
ACPI: SSDT 0x00000000C8FE7D98 00109B (v01 AmdRef AmdTabl  00001000 INTL 20120711)
ACPI: TCPA 0x00000000C8FE8E38 000032 (v02 APTIO4 NAPAASF  00000001 MSFT 01000013)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 9 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz, id 0x306c3
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz, id 0x306c3
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz, id 0x306c3
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz, id 0x306c3
acpi0 at mainbus0: Intel ACPICA 20160930
acpi0: X/RSDT: OemId <DELL  , CBX3   ,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE822CC32810 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810E7DA810 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810E727A50 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (ECDV, PNP0C09-0)
: io 0x930,0x934
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, DLLK05BE) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, DLL05BE) (aux port): irq 12
UAR1 (PNP0501) at acpi0 not configured
LPTE (PNP0401) at acpi0 not configured
ACD0 (INT33CA) at acpi0 not configured
DFUD (INT33D7) at acpi0 not configured
acpivga0 at acpi0 (PEGP): ACPI Display Adapter
acpivga0: connected output devices:
acpivga0:   0x0100: Ext. Monitor, head 0
acpivga0:   0x0400: Unknown Output Device, head 0
acpivga0:   0x0302: Unknown Output Device, head 0
acpivga0:   0x0303: Unknown Output Device, head 0
acpivga0:   0x0300: Unknown Output Device, head 0
acpivga0:   0x0301: Unknown Output Device, head 0
acpivga0:   0x0304: Unknown Output Device, head 0
acpivga0:   0x0305: Unknown Output Device, head 0
acpivga1 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga1 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga1 (LCD, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [5-100]
acpiout2 at acpivga1 (DVI, 0x0302): ACPI Display Output Device
acpiout3 at acpivga1 (DVI2, 0x0303): ACPI Display Output Device
acpiout4 at acpivga1 (DVI3, 0x0304): ACPI Display Output Device
acpiout5 at acpivga1 (DP, 0x0300): ACPI Display Output Device
acpiout6 at acpivga1 (DP2, 0x0301): ACPI Display Output Device
acpiout7 at acpivga1 (DP3, 0x0305): ACPI Display Output Device
acpivga1: connected output devices:
acpivga1:   0x0100 (acpiout0): Ext. Monitor, head 0
acpivga1:   0x0400 (acpiout1): Unknown Output Device, head 0
acpivga1:   0x0302 (acpiout2): Unknown Output Device, head 0
acpivga1:   0x0303 (acpiout3): Unknown Output Device, head 0
acpivga1:   0x0300 (acpiout5): Unknown Output Device, head 0
acpivga1:   0x0301 (acpiout6): Unknown Output Device, head 0
acpivga1:   0x0304 (acpiout4): Unknown Output Device, head 0
acpivga1:   0x0305 (acpiout7): Unknown Output Device, head 0
PDRC (PNP0C02) at acpi0 not configured
A_CC (SMO8810) at acpi0 not configured
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
wmidell0 at acpiwmi0: Dell WMI mappings
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: Samsung SDI LION rechargeable battery
acpibat0: granularity: low->warn 0.088 Ah, warn->full 0.088 Ah
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery
RBTN (DELLABCE) at acpi0 not configured
TPM (PNP0C31) at acpi0 not configured
acpitz0 at acpi0 (THM)
acpitz0: levels: critical 107.0 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 3F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0c04 (rev. 0x06)
ppb0 at pci0 dev 1 function 0: vendor 8086 product 0c01 (rev. 0x06)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
radeon0 at pci1 dev 0 function 0: vendor 1002 product 6606 (rev. 0x00)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0416 (rev. 0x06)
drm: Memory usable by graphics device = 2048M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff80008e5dd000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdaudio0: timeout leaving reset state
hdaudio0: device driver failed to attach
vendor 8086 product 8c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3: Intel 8 Series KT (com)
com2 at puc0 port 0 (16550-compatible): ioaddr 0xf0e0, interrupting at ioapic0 pin 19
com2: ns16550a, working fifo
wm0 at pci0 dev 25 function 0: I217 LM Ethernet Connection (rev. 0x04)
wm0: interrupting at msi0 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address f0:1f:af:4e:d5:85
ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 4
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 8086 product 8c2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg0 at hdaudio1: vendor 10ec product 0292
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: DAC01 2ch: Speaker [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb1 at pci0 dev 28 function 0: vendor 8086 product 8c10 (rev. 0xd4)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 2: vendor 8086 product 8c14 (rev. 0xd4)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci3 dev 0 function 0: vendor 8086 product 088e (rev. 0x24)
iwn0: interrupting at ioapic0 pin 18
iwn0: MIMO 2T2R, AGN, address b4:b6:76:df:7f:00
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb3 at pci0 dev 28 function 4: vendor 8086 product 8c18 (rev. 0xd4)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 5: vendor 8086 product 8c1a (rev. 0xd4)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 28 function 6: vendor 8086 product 8c1c (rev. 0xd4)
ppb5: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci0 dev 28 function 7: vendor 8086 product 8c1e (rev. 0xd4)
ppb6: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb6: link is x1 @ 2.5GT/s
pci7 at ppb6 bus 14
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
sdhc0 at pci7 dev 0 function 0: vendor 1217 product 8520 (rev. 0x01)
sdhc0: interrupting at ioapic0 pin 19
sdhc0: SDHC 4.0, rev 6, SDMA, 50000 kHz, HS SDR50 DDR50 SDR104 HS200 1.8V 3.3V, re-tuning mode 1, 2048 byte blocks
sdmmc0 at sdhc0 slot 0
ehci1 at pci0 dev 29 function 0: vendor 8086 product 8c26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 21
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 8c4f (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 8c03 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 5 ports, 32 slots, CAP 0xdf30ff64<SXS,EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SMPS,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 8c22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x32041114 rev 0x40
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat 148 us, pow   200 mW
acpicpu0: P0: FFH, lat  10 us, pow 37000 mW, 2601 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 37000 mW, 2600 MHz
acpicpu0: P2: FFH, lat  10 us, pow 35116 mW, 2500 MHz
acpicpu0: P3: FFH, lat  10 us, pow 31455 mW, 2300 MHz
acpicpu0: P4: FFH, lat  10 us, pow 29678 mW, 2200 MHz
acpicpu0: P5: FFH, lat  10 us, pow 27936 mW, 2100 MHz
acpicpu0: P6: FFH, lat  10 us, pow 26234 mW, 2000 MHz
acpicpu0: P7: FFH, lat  10 us, pow 23259 mW, 1800 MHz
acpicpu0: P8: FFH, lat  10 us, pow 21650 mW, 1700 MHz
acpicpu0: P9: FFH, lat  10 us, pow 20074 mW, 1600 MHz
acpicpu0: P10: FFH, lat  10 us, pow 17026 mW, 1400 MHz
acpicpu0: P11: FFH, lat  10 us, pow 15866 mW, 1300 MHz
acpicpu0: P12: FFH, lat  10 us, pow 14418 mW, 1200 MHz
acpicpu0: P13: FFH, lat  10 us, pow 13001 mW, 1100 MHz
acpicpu0: P14: FFH, lat  10 us, pow 10266 mW,  900 MHz
acpicpu0: P15: FFH, lat  10 us, pow  8945 mW,  800 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
DRM error in intel_uncore_check_errors: Unclaimed register before interrupt
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2594254290 Hz quality 3000
IPsec: Initialized Security Association Processing.
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ahcisata0 port 1: device present, speed: 1.5Gb/s
ahcisata0 port 0: device present, speed: 6.0Gb/s
drm: Enabling RC6 states: RC6 on, RC6p off, RC6pp off
wd0 at atabus0 drive 0
wd0: <ST500LM000-1EJ162>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVD+/-RW GU90N, KW4D8RK1330, A100> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub2 at uhub1 port 1: vendor 8087 product 8000, class 9/0, rev 2.00/0.04, addr 2
uhub2: single transaction translator
uhub3 at uhub0 port 1: vendor 8087 product 8008, class 9/0, rev 2.00/0.04, addr 2
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
uhub4 at uhub2 port 4: SMSC USB2134, class 9/0, rev 2.00/41.03, addr 3
uhub4: multiple transaction translators
uhub4: 3 ports with 3 removable, self powered
uhidev0 at uhub4 port 1 configuration 1 interface 0
uhidev0: Dell Dell USB Optical Mouse, rev 2.00/43.01, addr 4, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse1 at ums0 mux 0
uhub5 at uhub2 port 7: vendor 413c product 2513, class 9/0, rev 2.00/0.05, addr 5
uhub5: multiple transaction translators
uhub5: 3 ports with 3 removable, self powered
umass0 at uhub2 port 1 configuration 1 interface 0
umass0: Kingston DataTraveler 2.0, rev 2.00/1.00, addr 6
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Kingston, DataTraveler 2.0, PMAP> disk removable
sd0: 30008 MB, 7531 cyl, 255 head, 32 sec, 512 bytes/sect x 61457664 sectors
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
WARNING: 2 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.42/modules
drm: initializing kernel modesetting (OLAND 0x1002:0x6606 0x1028:0x05BE).
drm: register mmio base: 0xf7c00000
drm: register mmio size: 262144
DRM error in radeon_get_bios: Unable to locate a BIOS ROM
radeon0: error: Fatal error during GPU init
radeon0: unable to attach drm: 22
umass1 at uhub5 port 3 configuration 1 interface 0
umass1: Corsair Voyager Mini, rev 2.00/11.00, addr 7
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <Corsair, Voyager Mini, 1100> disk removable
sd1: 3824 MB, 7872 cyl, 16 head, 63 sec, 512 bytes/sect x 7831552 sectors
umass2 at uhub5 port 2 configuration 1 interface 0
umass2: USBest Technology USB Mass Storage Device, rev 2.00/1.00, addr 8
umass2: using SCSI over Bulk-Only
scsibus2 at umass2: 2 targets, 1 lun per target
sd2 at scsibus2 target 0 lun 0: <, , 0.00> disk removable
sd2: 3856 MB, 500 cyl, 8 head, 32 sec, 512 bytes/sect x 7897088 sectors
umass3 at uhub3 port 2 configuration 1 interface 0
umass3: TOSHIBA USB FLASH DRIVE, rev 2.10/1.10, addr 3
umass3: using SCSI over Bulk-Only
scsibus3 at umass3: 2 targets, 1 lun per target
sd3 at scsibus3 target 0 lun 0: <TOSHIBA, USB FLASH DRIVE, PMAP> disk removable
sd3: fabricating a geometry
sd3: 59568 MB, 59568 cyl, 64 head, 32 sec, 512 bytes/sect x 121995264 sectors
sd3: fabricating a geometry
acpibat0: normal capacity on 'charge state'
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
sd3: detached
scsibus3: detached
umass3: detached
umass3: at uhub3 port 2 (addr 3) disconnected
sd2: detached
scsibus2: detached
umass2: detached
umass2: at uhub5 port 2 (addr 8) disconnected
acpi0: entering state S3
Devices without power management support: hdaudio0
acpi0: aborting suspend