Re: NetBSD 5.1 AMD64 not recognize ethernet card

[patricio retamales <patricioretamales1%gmail.com@localhost>]

Hi, I changed the kernel, but still does not recognize my network cards.
The following steps I made​​:

cp netbsd-GENERIC.gz /netbsd
gunzip /netbsd

these are the outputs:

uname -a
NetBSD pillan 5.1.0_PATCH NetBSD 5.1.0_PATCH (GENERIC) #0: Sun May  1 06:06:07 UTC 2011  builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-1/amd64/201105010400Z-obj/home/builds/ab/netbsd-5-1/src/sys/arch/amd64/compile/GENERIC amd64

dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1.0_PATCH (GENERIC) #0: Sun May  1 06:06:07 UTC 2011
    builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-1/amd64/201105010400Z-obj/home/builds/ab/netbsd-5-1/src/sys/arch/amd64/compile/GENERIC
total memory = 3000 MB
avail memory = 2893 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.5 @ 0xbbac0000 (45 entries)
Acer            Aspire 5738                     (0100           )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 6384MHz, id 0x1067a
cpu0: Enhanced SpeedStep (1260 mV) 1000 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1000 900 800 700 600
cpu1 at mainbus0 apid 1: Intel 686-class, 6384MHz, id 0x1067a
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <ACRSYS,ACRPRDCT,06040000>, AslId <INNA,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: SANYO, LION, AS07A31 44018
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
pckbc1 at acpi0 (KBD0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN1B22) (aux port): irq 12
FWHD (INT0800) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
WMI0 (PNP0C14) at acpi0 not configured
AMW0 (pnp0c14) at acpi0 not configured
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpitz0 at acpi0 (TZS0): critical 90.0C passive 41.0C, passive cooling
acpitz1 at acpi0 (TZS1): critical 90.0C, passive cooling
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.2
pms0: Up/down buttons, Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2a40 (rev. 0x07)
agp0 at pchb0: detected 65532k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a42 (rev. 0x07)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 0x8086 product 0x2a43 (miscellaneous display, revision 0x07) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 20
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 20
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 21
azalia0: host: 0x8086/0x293e (rev. 3), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x03)
ppb0: disabling notification events
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x14e4 product 0x1698 (ethernet network, revision 0x10) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2942 (rev. 0x03)
ppb1: disabling notification events
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2944 (rev. 0x03)
ppb2: disabling notification events
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x4232 (miscellaneous network) at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 28 function 4: vendor 0x8086 product 0x2948 (rev. 0x03)
ppb3: disabling notification events
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 23
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 17
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 18
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 3: vendor 0x8086 product 0x2939 (rev. 0x03)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x03)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x93)
pci5 at ppb4 bus 13
pci5: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x2919 (rev. 0x03)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2929
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: AHCI revision 1.2, 4 ports, 32 command slots, features 0xef20e0c0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
attimer1: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Realtek ALC888 (rev. 2.2), HDA rev. 1.0
azalia0: codec[1]: 0x11c1/0x1040 (rev. 2.0), HDA rev. 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
azalia0: codec[3]: 0x8086/0x2802 (rev. 0.0), HDA rev. 1.0
audio0 at azalia0: full duplex, playback, capture, independent
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 8 ports with 8 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
ahcisata0 port 5: PHY offline
wd0 at atabus0 drive 0: <ST9320320AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <TSSTcorp CDDVDW TS-L633B, , AC01> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
acpiacad0: AC adapter online.
uvideo0 at uhub7 port 5 configuration 1 interface 0: SuYin Video WebCam, rev 2.00/5.00, addr 2
video0 at uvideo0: SuYin Video WebCam, rev 2.00/5.00, addr 2
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

pcictl /dev/pci0 list
000:00:0: Intel 82GM45 Host Bridge (host bridge, revision 0x07)
000:02:0: Intel 82GM45 Integrated Graphics Device (VGA display, revision 0x07)
000:02:1: Intel 82GM45 Integrated Graphics Device (miscellaneous display, revision 0x07)
000:26:0: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x03)
000:26:1: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x03)
000:26:7: Intel 82801I USB EHCI Controller (USB serial bus, interface 0x20, revision 0x03)
000:27:0: Intel 82801I High Definition Audio Controller (multimedia subclass 0x03, revision 0x03)
000:28:0: Intel 82801I PCI Express Port #1 (PCI bridge, revision 0x03)
000:28:1: Intel 82801I PCI Express Port #2 (PCI bridge, revision 0x03)
000:28:2: Intel 82801I PCI Express Port #3 (PCI bridge, revision 0x03)
000:28:4: Intel 82801I PCI Express Port #5 (PCI bridge, revision 0x03)
000:29:0: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x03)
000:29:1: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x03)
000:29:2: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x03)
000:29:3: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x03)
000:29:7: Intel 82801I USB EHCI Controller (USB serial bus, interface 0x20, revision 0x03)
000:30:0: Intel 82801BAM Hub-PCI Bridge (PCI bridge, interface 0x01, revision 0x93)
000:31:0: Intel 82801IM LPC Interface Bridge (ISA bridge, revision 0x03)
000:31:2: Intel 82801I Mobile AHCI SATA Controller with 4 ports (SATA mass storage, interface 0x01, revision 0x03)
000:31:3: Intel 82801I SMBus Controller (SMBus serial bus, revision 0x03)

pcictl /dev/pci0 list -n
000:00:0: 0x2a408086 (0x06000007)
000:02:0: 0x2a428086 (0x03000007)
000:02:1: 0x2a438086 (0x03800007)
000:26:0: 0x29378086 (0x0c030003)
000:26:1: 0x29388086 (0x0c030003)
000:26:7: 0x293c8086 (0x0c032003)
000:27:0: 0x293e8086 (0x04030003)
000:28:0: 0x29408086 (0x06040003)
000:28:1: 0x29428086 (0x06040003)
000:28:2: 0x29448086 (0x06040003)
000:28:4: 0x29488086 (0x06040003)
000:29:0: 0x29348086 (0x0c030003)
000:29:1: 0x29358086 (0x0c030003)
000:29:2: 0x29368086 (0x0c030003)
000:29:3: 0x29398086 (0x0c030003)
000:29:7: 0x293a8086 (0x0c032003)
000:30:0: 0x24488086 (0x06040193)
000:31:0: 0x29198086 (0x06010003)
000:31:2: 0x29298086 (0x01060103)
000:31:3: 0x29308086 (0x0c050003)

pcictl /dev/pci1 list
002:00:0: Broadcom product 0x1698 (ethernet network, revision 0x10)

pcictl /dev/pci1 list -n
002:00:0: 0x169814e4 (0x02000010)


ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33648
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1

Thanks.

2011/5/2 Matthias Scheler <tron%zhadum.org.uk@localhost>

On Mon, May 02, 2011 at 07:23:28PM -0300, patricio retamales wrote:
> Yes, I can install this branch removing my current installation of netbsd
> 5.1, but after a couple of days more, because I have very little time due to
> my work.

You don't to replace your current NetBSD installation. All you need is
a new kernel. You will find it on that ISO image you can download
it here:

http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-5-1/201105010400Z/amd64/binary/kernel/netbsd-GENERIC.gz

       Kind regards

--
Matthias Scheler                                  http://zhadum.org.uk/