Re: NetBSD on Dell Mini 12 ? (dmesg)

To: netbsd-users%NetBSD.org@localhost
Subject: Re: NetBSD on Dell Mini 12 ? (dmesg)
From: Geert Hendrickx <ghen%telenet.be@localhost>
Date: Tue, 24 Mar 2009 11:51:31 +0100

On Fri, Mar 06, 2009 at 09:04:55PM +0100, Geert Hendrickx wrote:
> Hi,
> 
> does anyone have NetBSD (5.0 or current) running on a Dell Mini 12 ?
> Those look like nice netbooks but with a decent keyboard size so I'm
> tempted to buy one. :-)

Well, it arrived today.  The dmesg for NetBSD 5.0_RC3 is attached. :-)

ACPI, wired network, sound and webcam seem to work properly.  But the
wireless card isn't recognized:

vendor 0x14e4 product 0x4315 (miscellaneous network, revision 0x01) at pci2
dev 0 function 0 not configured

Unfortunately I don't know what kind of card it is.  Any idea whether this
should be supported by any of our existing drivers?

I'm also having trouble getting X configured.  With no (or a generated)
xorg.conf, I get "(EE) VESA(0): No matching modes", and X dies with "(EE)
Screen(s) found, but none have a usable configuration".
If I manually specify the mode (1280x800) and the "vga" driver, X will
start without complaining, but the screen just goes black.  Ctrl-Alt-
Backspace works to bring me back to the console.

Any idea?

        Geert

-- 
Geert Hendrickx  -=-  ghen%telenet.be@localhost  -=-  PGP: 0xC4BB9E9F
This e-mail was composed using 100% recycled spam messages!

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_RC3 (GENERIC) #0: Fri Mar 20 14:59:26 CET 2009
        
ghen%boris.ghen.be@localhost:/scratch/netbsd/netbsd-5/obj/i386/sys/arch/i386/compile/GENERIC
total memory = 1014 MB
avail memory = 985 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. Inspiron 1210    (A02)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1596MHz, id 0x106c2
cpu0: Enhanced SpeedStep (1196 mV) 1600 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1600 1467 1333 1200 1067 
933 800
cpu1 at mainbus0 apid 1: Intel 686-class, 1596MHz, id 0x106c2
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <DELL  , M09    ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Error (evxfevnt-0288): Could not enable PowerButton event [20080321]
ACPI Warning (evxface-0235): Could not enable fixed event 2 [20080321]
acpi0: unable to install handler for fixed power button: AE_NO_HARDWARE_RESPONSE
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
EMSC (CPL0002) at acpi0 not configured
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
FWHD (INT0800) at acpi0 not configured
npx1 at acpi0 (MATH, PNP0C04)
npx1: io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TIMR, PNP0100): AT Timer
attimer1: io 0x40-0x43
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: Dell, Lion,  11
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0601): aux port
pckbc2: irq 12
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.0
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x8100 (rev. 0x07)
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x8108 (rev. 0x07)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22
azalia0: host: 0x8086/0x811b (rev. 7), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x8110 (rev. 0x07)
ppb0: disabling notification events
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci1 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 
10/100BaseTX (rev. 0x02)
re0: interrupting at ioapic0 pin 16
re0: Ethernet address 00:21:70:e7:df:6b
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x8112 (rev. 0x07)
ppb1: disabling notification events
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x14e4 product 0x4315 (miscellaneous network, revision 0x01) at pci2 dev 
0 function 0 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x8114 (rev. 0x07)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x8115 (rev. 0x07)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x8116 (rev. 0x07)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x8117 (rev. 0x07)
ehci0: interrupting at ioapic0 pin 21
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x8119 (rev. 0x07)
pciide0 at pci0 dev 31 function 1
pciide0: vendor 0x8086 product 0x811a (rev. 0x07)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to compatibility mode
pciide0: primary channel interrupting at ioapic0 pin 14
atabus0 at pciide0 channel 0
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (not responding; disabled or no drives?)
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
attimer1: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Realtek ALC269 (rev. 0.4), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: Corsair Flash Voyager, rev 2.00/11.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Corsair, Flash Voyager, 1100> disk removable
sd0: 1936 MB, 3936 cyl, 16 head, 63 sec, 512 bytes/sect x 3964928 sectors
wd0 at atabus0 drive 0: <TOSHIBA MK8025GAL>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
uvideo0 at uhub3 port 6 configuration 1 interface 0: SONiX Technology Inc 
Integrated Webcam, rev 2.00/87.21, addr 3
video0 at uvideo0: SONiX Technology Inc Integrated Webcam, rev 2.00/87.21, addr 
3
ubt0 at uhub1 port 1
ubt0: Broadcom Corp BCM2046 Bluetooth Device, rev 2.00/4.67, addr 2
umass1 at uhub3 port 7 configuration 1 interface 0
umass1: Generic USB2.0-CRW, rev 2.00/58.87, addr 4
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
sd1: drive offline
sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1: unable to open device, error = 19
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs

Follow-Ups:
- Re: NetBSD on Dell Mini 12 -> X11 ok now
  - From: Geert Hendrickx
- Re: NetBSD on Dell Mini 12 ? (dmesg)
  - From: dieter roelants
- Re: NetBSD on Dell Mini 12 ? (dmesg)
  - From: Pouya D. Tafti

References:
- NetBSD on Dell Mini 12 ?
  - From: Geert Hendrickx

Prev by Date: Re: WLAN power save on NetBSD?
Next by Date: Re: OpenSolaris hg clone fails for me
Previous by Thread: NetBSD on Dell Mini 12 ?
Next by Thread: Re: NetBSD on Dell Mini 12 ? (dmesg)
Indexes:

Home | Main Index | Thread Index | Old Index