Kernel 5.0 Rc1 fails booting

To: netbsd-users%NetBSD.org@localhost
Subject: Kernel 5.0 Rc1 fails booting
From: Thilo Jeremias <thilo.jeremias%gmail.com@localhost>
Date: Thu, 05 Feb 2009 07:17:45 +1000
G'day

I compiled a CVS checkout yesterday and the generic kernel hangs with
disk-errors (timeouts below is the boot log)
the XEN kernels immediatly crash and reboot the machine.

any ideas ?

The system has 2 sata  and 6 pata drives as multiple auto-conf raid
the root fs is on raid too.
The system works flawless with netbsd 40

cheers

mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD 686-class, 2099MHz, id 0x60fb1
cpu0: AMD PowerNow! Technology 2100 MHz
cpu0: available frequencies (Mhz): 1000 1800 2000 2100
cpu1 at mainbus0 apid 1: AMD 686-class, 2099MHz, id 0x60fb1
ioapic0 at mainbus0 apid 2
ioapic1 at mainbus0 apid 3
acpi0 at mainbus0: Intel ACPICA 20080321
ALKB: BIOS IRQ 10 does not match initial IRQ 11
ALKB: BIOS IRQ 11 for 0.16.INTB does not match previous BIOS IRQ 10
ALKB: BIOS IRQ 11 for 0.16.INTC does not match previous BIOS IRQ 10
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
LPT1 (PNP0400) at acpi0 not configured
pckbc1 at acpi0 (PS2M, PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PS2K, PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
FAN (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 73.0C critical 75.0C
passive 47.0C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0336 (rev. 0x00)
agp0 at pchb0 (v3): aperture at 0xd0000000, size 0x10000000
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1106 product 0x1336 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1106 product 0x2336 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: vendor 0x1106 product 0x3336 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: vendor 0x1106 product 0x4336 (rev. 0x00)
vendor 0x1106 product 0x5336 (interrupt system, interface 0x20) at pci0
dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 7
pchb5: vendor 0x1106 product 0x7336 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb188 (rev. 0x00)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x3230 (rev. 0x11)
wsdisplay0 at vga1 kbdmux 1
drm at vga1 not configured
ppb1 at pci0 dev 2 function 0: vendor 0x1106 product 0xa238 (rev. 0x00)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 3 function 0: vendor 0x1106 product 0xc238 (rev. 0x00)
pci3 at ppb2 bus 3
cmdide0 at pci0 dev 5 function 0
cmdide0: Silicon Image 0680 (rev. 0x02)
cmdide0: primary channel configured to native-PCI mode
cmdide0: using ioapic0 pin 16 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel configured to native-PCI mode
atabus1 at cmdide0 channel 1
skc0 at pci0 dev 6 function 0: ioapic0 pin 17
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk0 at skc0 port A: Ethernet address 00:21:91:92:ee:9a
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
rtk0 at pci0 dev 9 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 19
rtk0: Ethernet address 00:15:58:6d:63:81
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
ALKA: mpacpi_findintr_linkdev: irq mismatch (11 vs 1)
viaide0: using ioapic0 pin 11 for native-PCI interrupt
atabus2 at viaide0 channel 0
atabus3 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: primary channel interrupting at ioapic0 pin 14
atabus4 at viaide1 channel 0
viaide1: secondary channel interrupting at ioapic0 pin 15
atabus5 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci0: interrupting at ioapic0 pin 11
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci1: interrupting at ioapic0 pin 11
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci2: interrupting at ioapic0 pin 11
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 16 function 3: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci3: interrupting at ioapic0 pin 11
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x86)
ehci0: interrupting at ioapic0 pin 11
ehci0: dropped intr workaround enabled
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x3227 (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC'97 Audio
(rev 0x60)
auvia0: interrupting at ioapic0 pin 11
auvia0: ac97: Avance Logic ALC655 codec; no 3D stereo
auvia0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
audio0 at auvia0: full duplex, independent
pchb6 at pci0 dev 24 function 0
pchb6: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb7 at pci0 dev 24 function 1
pchb7: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb8 at pci0 dev 24 function 2
pchb8: vendor 0x1022 product 0x1102 (rev. 0x00)
amdtemp0 at pci0 dev 24 function 3
amdtemp0: AMD CPU Temperature Sensors (K8: core rev BH-G1, socket AM2)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3 at usb3: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4 at usb4: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
viaide0 port 0: device present, speed: 1.5Gb/s
viaide0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <Maxtor 6L200P0>
wd0: 189 GB, 395136 cyl, 16 head, 63 sec, 512 bytes/sect x 398297088 sectors
wd1 at atabus1 drive 0: <ST3320620A>
wd1: quirks 2<FORCE_LBA48>
wd1: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd2 at atabus2 drive 0viaide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
: <SAMSUNG HD103UI>
wd2: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168
sectors
viaide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
viaide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
viaide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
viaide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
viaide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
viaide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
viaide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0)
viaide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
viaide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
viaide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
viaide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
Follow-Ups:
- Re: Kernel 5.0 Rc1 fails booting
  - From: Jonathan A. Kollasch
Prev by Date: Re: /usr/bin/tip + serial console?
Next by Date: Re: problems when using usb with NetBSD
Previous by Thread: /usr/bin/tip + serial console?
Next by Thread: Re: Kernel 5.0 Rc1 fails booting
Indexes:
Home | Main Index | Thread Index | Old Index