Re: 4.0.1 GENERIC: uhub0: device problem, disabling port 1

["Ingolf Steinbach" <ingolf.steinbach%googlemail.com@localhost>]

2008/12/25 Jean-Yves Migeon <jean-yves.migeon%espci.fr@localhost>:
> boot -c
> [wait for userconf prompt, then]
> disable acpi
> quit

That looks a lot better now (see below). Thank you for the hint.
Should I file a PR or does it look more like bogous hardware?

Kind regards
Ingolf


4.0.1 GENERIC with ACPI disabled:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0.1 (GENERIC) #0: Tue Oct  7 22:58:48 PDT 2008
        
builds@wb30:/home/builds/ab/netbsd-4-0-1-RELEASE/i386/200810080053Z-obj/home/builds/ab/netbsd-4-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 255 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 240 MB
timecounter: Timecounters tick every 10.000 msec
userconf: configure system autoconfiguration:
uc> disable acpi
[464] acpi0 disabled
uc> quit
Continuing...
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfb350
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Duron (686-class), 797.34 MHz, id 0x631
cpu0: features c1c7f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features c1c7f9ff<PGE,MCA,CMOV,PAT,PSE36,PN,MMXX,MMX>
cpu0: features c1c7f9ff<FXSR,3DNOW2,3DNOW>
cpu0: "AMD Duron(tm) Processor"
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 64 KB 64B/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 24 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8363 (Apollo KT133) Host Bridge (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8363 (Apollo KT133)
PCI to AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Rage Fury MAXX AGP 4x
(TMDS) (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C686A PCI-ISA Bridge (rev. 0x40)
viaide0 at pci0 dev 7 function 1
viaide0: VIA Technologies VT82C686A (Apollo KX133) ATA100 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB
Controller (rev. 0x16)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB
Controller (rev. 0x16)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 7 function 4
pchb1: VIA Technologies VT82C686A SMBus Controller (rev. 0x40)
auvia0 at pci0 dev 7 function 5: VIA Technologies VT82C686A AC'97
Audio (rev 0x50)
auvia0: interrupting at irq 5
auvia0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
auvia0: ac97: ext id 200<AMAP>
audio0 at auvia0: full duplex, independent
rtk0 at pci0 dev 9 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:00:1c:d3:c3:13
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
pcppi0: children must have an explicit unit
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
ulpt0 at uhub0 port 1 configuration 1 interface 0
ulpt0: Hewlett-Packard DeskJet 815C, rev 1.00/1.00, addr 2, iclass 7/1
ulpt0: using uni-directional mode
uhub2 at uhub0 port 2
uhub2: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr 3
uhub2: 4 ports with 4 removable, self powered
wd0 at atabus0 drive 0: <ST320413A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <JLMS DVD-ROM LTD-166S, , DS0C> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 3
cd1 at atapibus0 drive 1: <LG CD-RW CED-8080B, 2000/07/27, 1.06> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 3 (using DMA)
cd1(viaide0:1:1): using PIO mode 4, DMA mode 2 (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs