Re: burning a DVD

["Francisco Valladolid" <ficovh%gmail.com@localhost>]

I'm using all time dvd+rw tools :
from the following manner:

# growisofs  -dvd-compat -Z /dev/rcd0d=imagen.iso

I write a short article in we wiki: (spanish only)

http://wiki.netbsd.org.mx/index.php/Grabando_CD/DVD


Regards.

On Mon, Aug 4, 2008 at 12:51 AM, Steven M. Bellovin 
<smb%bellovin.org@localhost> wrote:
> I'm trying to burn a DVD from a .iso file.  I'm not having any luck --
> what am I doing wrong?
>
> When I simply try 'dvdrecord file.iso', it tells me that the device does
> not support TAO recording.  I tried -dao; I got further but still no
> joy.  -packet complained that TAO mode wasn't support, and -sao isn't
> recognized.  Anything else I can try?  (This is dvdrecord-0.1.5nb2
> on two different -current machines, with different drive hardware.)
>
> ----
>
> # dvdrecord -dao ~smb/windowsvistasp1.iso
> dvdrtools v0.1.4
> Portions (c) 2002-2003 Ark Linux <bero%arklinux.org@localhost>
> This program is free software; you can redistribute it and/or modify it under
> the terms of the GNU General Public License as published by the Free Software
> Foundation; either version 2, or (at your option) any later version.
>
> This program is distributed in the hope that it will be useful, but WITHOUT 
> ANY
> WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
> A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
>
> You should have received a copy of the GNU General Public License along with
> this program; see the file COPYING.  If not, write to the Free Software
> Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
> Based on:
> scsidev: '/dev/rcd0d'
> devname: '/dev/rcd0d'
> scsibus: -2 target: -2 lun: -2
> Using libscg version 'bero-0.5a'
> dvdrecord: Warning: using inofficial version of libscg (bero-0.5a 
> '@(#)scsitransp.c     1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
> dvdrecord: Warning: using inofficial libscg transport code version 
> (frueauf-scsi-bsd.c-1.40nb1 '@(#)scsi-bsd.c  1.40 01/03/18 Copyright 1997 J. 
> Schilling').
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 2
> Capabilities   :
> Vendor_info    : 'HL-DT-ST'
> Identifikation : 'DVDRAM GSA-U10N '
> Revision       : '1.05'
> Device seems to be: Generic mmc2 DVD.
> Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
> Driver flags   : SWABAUDIO BURNFREE
> Supported modes: PACKET SAO
> Starting to write CD/DVD at speed 8 in write mode for single session.
> Last chance to quit, starting real write in 0 seconds. Operation starts.
> trackno=0
> dvdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
> CDB:  2A 00 00 08 66 A6 00 00 1E 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 0C 21 02 00 00 00 00 00 00 00 
> 00 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x21 Qual 0x02 (logical block address out of range) [No matching 
> qualifier] Fru 0x0
> Sense flags: Blk 0 (not valid)
> resid: 61440
> cmd finished after 0.002s timeout 200s
> write track data: error after 0 bytes
> Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 0C 21 02 00 00 00 00 00 00 00 
> 00 00 00 00 00 00 00 00 00 00 00
>
>
>                --Steve Bellovin, http://www.bellovin.org
>



-- 
Francisco Valladolid H.
 -- http://bsdguy.net - Jesus Christ follower.