Re: i965 graphic card

To: netbsd-users%NetBSD.org@localhost
Subject: Re: i965 graphic card
From: Pierrick Brossin <pierrick%bs-network.net@localhost>
Date: Thu, 17 Jul 2008 15:14:44 +0200

Matthias Scheler wrote:

On Tue, Jul 15, 2008 at 01:08:24PM +0200, Pierrick Brossin wrote:
I have a intel 965 graphic card in my laptop. I installed xorg,configured it properly but when I run startx I get (in the logs):
Unable to open: /dev/agpgart
Which version of NetBSD are you using?


It's NetBSD 4.0 STABLE.

The file is there though. I have no info about AGP and DRM in dmesg.


What is the actual output of "dmesg"?


dmesg.boot attached !

Thanks for your time

Pierrick

x8086 0x283a   C  0x02  11  0    already assigned
000:28:0 0x8086 0x283f   A  0x00   5  0    WARNING: preserving irq 10
000:28:1 0x8086 0x2841   B  0x01  10  0    already assigned
000:28:2 0x8086 0x2843   C  0x02  11  0    already assigned
000:28:4 0x8086 0x2847   A  0x00   5  0    WARNING: preserving irq 10
000:29:0 0x8086 0x2830   A  0x04  10  0    already assigned
000:29:1 0x8086 0x2831   B  0x05  10  0    already assigned
000:29:2 0x8086 0x2832   C  0x02  11  0    already assigned
000:29:7 0x8086 0x2836   A  0x04  10  0    already assigned
000:31:1 0x8086 0x2850   A  0x00   5  0    WARNING: preserving irq 10
000:31:2 0x8086 0x2829   B  0x05  10  0    already assigned
002:04:0 0x1180 0x0476   A  0x00   5  0    already assigned
016:00:0 0x8086 0x4222   A  0x01  10  0    already assigned
024:00:0 0x14e4 0x1693   A  0x02  11  0    already assigned
------------------------------------------
mainbus0 (root)
pci_addr_fixup: 000:31:1 0x8086 0x2850 new address 0x00005800
pci_addr_fixup: 000:31:1 0x8086 0x2850 new address 0x00005808
pci_addr_fixup: 000:31:1 0x8086 0x2850 new address 0x00005810
pci_addr_fixup: 000:31:1 0x8086 0x2850 new address 0x0000580c
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Core 2 (Merom) (686-class), 1995.23 MHz, id 0x6fd
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
cpu0: "Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1420 mV) 2200 MHz
cpu0: unknown Enhanced SpeedStep CPU.
cpu0: using only highest and lowest power states.
cpu0: Enhanced SpeedStep frequencies available (MHz): 2200 1200
cpu0: 64 page colors
cpu at mainbus0: not configured
ioapic at mainbus0: not configured
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000001>, AslId <HP  ,00000001>
ACPI Error (evgpeblk-0394): Unknown GPE method type: C1B9 (name not of form 
_Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C1BA (name not of form 
_Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C1BC (name not of form 
_Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C1BD (name not of form 
_Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C1BB (name not of form 
_Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C2AF (name not of form 
_Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C2B0 (name not of form 
_Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C2B1 (name not of form 
_Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C2B2 (name not of form 
_Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C154 (name not of form 
_Lxx or _Exx) [20060217]
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
mpacpi: could not get bus number, assuming bus 0
C12D: ACPI: Found matching pin for 0.2.INTA at func 0: 10
C12D: ACPI: Found matching pin for 0.27.INTA at func 0: 10
C12D: ACPI: Found matching pin for 0.28.INTA at func 0: 10
C12E: ACPI: Found matching pin for 0.28.INTB at func 1: 10
C12F: ACPI: Found matching pin for 0.28.INTC at func 2: 11
C140: ACPI: Found matching pin for 0.29.INTA at func 0: 10
C141: ACPI: Found matching pin for 0.29.INTB at func 1: 10
C12F: ACPI: Found matching pin for 0.29.INTC at func 2: 11
C12D: ACPI: Found matching pin for 0.26.INTA at func 0: 10
C12E: ACPI: Found matching pin for 0.26.INTB at func 1: 10
C12F: ACPI: Found matching pin for 0.26.INTC at func 7: 11
C12D: ACPI: Found matching pin for 0.31.INTA at func 1: 10
C12E: ACPI: Found matching pin for 0.31.INTB at func 2: 10
C12D: ACPI: Found matching pin for 5.4.INTA at func 0: 5
C12D: BIOS IRQ 5 for 5.4.INTA is invalid
C12E: ACPI: Found matching pin for 2.0.INTA at func 0: 10
C12F: ACPI: Found matching pin for 3.0.INTA at func 0: 11
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0C01 at acpi0 not configured
PNP0A08 at acpi0 not configured
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
PNP0A06 at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
PNP0401 at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
IFX0102 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0103 at acpi0 not configured
PNP0303 at acpi0 not configured
SYN0134 at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0C02 at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
HPQ0004 at acpi0 not configured
PNP0C02 at acpi0 not configured
HPQ0006 at acpi0 not configured
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpibat1 at acpi0 (PNP0C0A-2): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
PNP0C14 at acpi0 not configured
PNP0C02 at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
PNP0C0B at acpi0 not configured
PNP0C0B at acpi0 not configured
PNP0C0B at acpi0 not configured
PNP0C0B at acpi0 not configured
PNP0C0B at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: active cooling level 0: 80.0C
acpitz0: active cooling level 1: 65.0C
acpitz0: active cooling level 2: 55.0C
acpitz0: active cooling level 3: 45.0C
acpitz0: active cooling level 4: 35.0C
acpitz0:
acpitz1 at acpi0: ACPI Thermal Zone
acpitz1: unable to get polling interval; using default of 30.0s
acpitz1: critical 108.0C passive 59.0C
acpitz2 at acpi0: ACPI Thermal Zone
acpitz2: unable to get polling interval; using default of 30.0s
acpitz2: critical 105.0C passive 46.0C
acpitz3 at acpi0: ACPI Thermal Zone
acpitz3: unable to get polling interval; using default of 30.0s
acpitz3: critical 108.0C passive 27.9C
acpitz4 at acpi0: ACPI Thermal Zone
acpitz4: unable to get polling interval; using default of 30.0s
acpitz4: critical 110.0C
apm0 at acpi0: Power Management spec V1.2
acpibat0: battery info: Hewlett-Packard, LIon, Primary, 42538 2007/08/15
acpiec0: EcRead: timeout waiting for EC to send data
ACPI Exception (evregion-0521): AE_ERROR, Returned by Handler for 
[EmbeddedControl] [20060217]
ACPI Exception (dswexec-0568): AE_ERROR, While resolving operands for 
[AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed 
[\_SB_.C003.C004.C006.C22F] (Node 0xc2e394c0), AE_ERROR
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.C22F] (Node 
0xc2e3d420), AE_ERROR
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.C23B._BST] 
(Node 0xc2e3d360), AE_ERROR
acpibat0: failed to evaluate _BST: AE_ERROR
acpiacad0: AC adapter offline.
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x2a00 (rev. 0x0c)
vga1 at pci0 dev 2 function 0: Intel product 0x2a02 (rev. 0x0c)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Intel product 0x2a03 (miscellaneous display, revision 0x0c) at pci0 dev 2 
function 1 not configured
uhci0 at pci0 dev 26 function 0: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 26 function 1: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 26 function 7: Intel 82801H USB EHCI Controller (rev. 0x03)
ehci0: interrupting at irq 11
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at irq 10
azalia0: host: Intel 82801H High Definition Audio Controller (rev. 3)
azalia0: host: High Definition Audio rev. 1.0
ppb0 at pci0 dev 28 function 0: Intel 82801H PCI Express Port #1 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: Intel 82801H PCI Express Port #2 (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci2 dev 0 function 0: Intel PRO/Wireless LAN 3945ABG Mini-PCI Adapter 
(rev. 0x02)
wpi0: interrupting at irq 10
, MoW2, address 00:1b:77:cc:63:56
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 
36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 2: Intel 82801H PCI Express Port #3 (rev. 0x03)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci3 dev 0 function 0: Broadcom BCM5787M Gigabit Ethernet
bge0: interrupting at irq 11
bge0: ASIC BCM5754/5787 A2 (0xb002), Ethernet address 00:1a:4b:6a:d3:89
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5754/5787 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb3 at pci0 dev 28 function 4: Intel 82801H PCI Express Port #5 (rev. 0x03)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
uhci2 at pci0 dev 29 function 0: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci2: interrupting at irq 10
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 1: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci3: interrupting at irq 10
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4 at pci0 dev 29 function 2: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci4: interrupting at irq 11
usb5 at uhci4: USB revision 1.0
uhub5 at usb5
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci1 at pci0 dev 29 function 7: Intel 82801H USB EHCI Controller (rev. 0x03)
ehci1: interrupting at irq 10
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
uhub6 at usb6
uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
ppb4 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xf3)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
cbb0 at pci5 dev 4 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0xb6)
cbb0: interrupting at irq 10
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 6
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x2815 (rev. 0x03)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: Intel 82801HBM SATA Controller
ahcisata0: interrupting at irq 10
ahcisata0: AHCI revision 1.1, 3 ports, 32 command slots, features 0xef20e080
atabus1 at ahcisata0 channel 0
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Palm detect, Multi-finger
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
pcppi0: children must have an explicit unit
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
WARNING: Callback scheduled before sysmon task queue thread present.
WARNING: Callback scheduled before sysmon task queue thread present.
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Analog Devices AD1981HD (rev. 2.0)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: playback: max channels=2, encodings=1<PCM>
azalia0: playback: PCM 
formats=e007f<24bit,20bit,16bit,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz,8kHz>
azalia0: recording: max channels=2, encodings=1<PCM>
azalia0: recording: PCM 
formats=6007f<20bit,16bit,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz,8kHz>
azalia0: codec[1]: 0x11c1/0x1040 (rev. 2.0)
azalia0: codec[1]: High Definition Audio rev. 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, independent
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-T20N, KX978RN3827, WP03> cdrom 
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ahcisata0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus1 drive 0: <Hitachi HTS541616J9SA00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
umass0 at uhub6 port 1 configuration 1 interface 0
umass0: OCZ Technology RALLY2, rev 2.00/11.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <OCZ, RALLY2, 1100> disk removable
sd0: 7648 MB, 15744 cyl, 16 head, 63 sec, 512 bytes/sect x 15663104 sectors
ubt0 at uhub0 port 1 configuration 1 interface 0
ubt0: Broadcom Corp HP Integrated Module, rev 2.00/1.00, addr 2
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
ugen0 at uhub3 port 2
ugen0: AuthenTec Fingerprint Sensor, rev 1.10/6.23, addr 2
uhidev0 at uhub4 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/27.20, addr 2, iclass 3/1
ums0 at uhidev0: 8 buttons and Z dir.
wsmouse1 at ums0 mux 0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)

Follow-Ups:
- Re: i965 graphic card
  - From: Matthias Scheler

References:
- i965 graphic card
  - From: Pierrick Brossin
- Re: i965 graphic card
  - From: Matthias Scheler

Prev by Date: Re: i965 graphic card
Next by Date: How can I scan for available ssid's?
Previous by Thread: Re: i965 graphic card
Next by Thread: Re: i965 graphic card
Indexes:

Home | Main Index | Thread Index | Old Index