Re: Seagate Cheetahs only async on controller

[Christian Baer <christian.baer%uni-dortmund.de@localhost>]

Manuel Bouyer wrote:

> > Here is a part of my dmesg using FreeBSD 7.0-STABLE on the same machine:
> > da1 at sym0 bus 0 target 1 lun 0
> > da1: <SEAGATE SX173404LC BD0A> Fixed Direct Access SCSI-3 device
> > da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit)
> > da1: Command Queueing Enabled
> > da1: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
> > da0 at sym0 bus 0 target 0 lun 0
> > da0: <SEAGATE SX173404LC BD0A> Fixed Direct Access SCSI-3 device
> > da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit)
> > da0: Command Queueing Enabled
> > da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
> > cd0 at sym0 bus 0 target 6 lun 0
> > cd0: <TOSHIBA DVD-ROM SD-M1401 1007> Removable CD-ROM SCSI-2 device
> > cd0: 20.000MB/s transfers (20.000MHz, offset 16)

> Could you rebuild a kernel with DEBUG_NEG #defined in dev/ic/siop_common.c,
> and post dmesg ?

No problem! But I *would* like to know what you think about it just the 
same. :-)

Note: Instead of the "normal" #undef line, I put in
#define DEBUG_NEG 1
Which should do the trick.

Regards,
Chris

This is pretty much complete. Maybe it helps...

Program terminated
{0} ok boot disk
Resetting ...


Sun Ultra 60 UPA/PCI (2 X UltraSPARC-II 450MHz), No Keyboard
OpenBoot 3.27, 2048 MB memory installed, Serial #15069787.
Ethernet address 8:0:20:e5:f2:5b, Host ID: 80e5f25b.



Rebooting with command: boot disk
Boot device: /pci@1f,4000/scsi@3/disk@0,0  File and args:
NetBSD IEEE 1275 Bootblock
>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.9
>> (builds@wb26, Sun Dec 16 01:20:57 PST 2007)
=0x421cb8
Loading netbsd: 4332664+507200 [348168+223510]=0x5298d8
xtlb[0]: Tag: 1000000 Data: e0000000bf800076
xtlb[1]: Tag: 1400000 Data: e0000000bf400076
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.67 (SUNNY) #0: Tue Jul  1 15:13:10 CEST 2008

christian@sunny:/usr/build/obj.sparc64/usr/src/sys/arch/sparc64/compile/SUNNY
total memory = 2048 MB
avail memory = 2000 MB
mainbus0 (root): SUNW,Ultra-60 (Sun Ultra 60 UPA/PCI): hostid 80e5f25b
cpu0 at mainbus0: SUNW,UltraSPARC-II @ 450.030 MHz, UPA id 0
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 4096K external (64 b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-II @ 450.030 MHz, UPA id 2
cpu1: 32K instruction (32 b/l), 16K data (32 b/l), 4096K external (64 b/l)
psycho0 at mainbus0 addr 0xfffb4000
psycho0: SUNW,psycho: impl 0, version 4: ign 7c0 bus range 0 to 0; PCI bus 0
DVMA map: fe000000 to ffffe000
IOTSB: 2582000 to 258a000
pci0 at psycho0
ebus0 at pci0 dev 1 function 0
ebus0: Sun Microsystems PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 
72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
sc at ebus0 addr 500000-500007 not configured
sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2
sabtty0 at sab0 port 0: console i/o
sabtty1 at sab0 port 1
com0 at ebus0 addr 3083f8-3083ff ipl 41: ns16550a, working fifo
kbd0 at com0
com1 at ebus0 addr 3062f8-3062ff ipl 42: ns16550a, working fifo
ms0 at com1
lpt0 at ebus0 addr 3043bc-3043cb, 300398-300399, 700000-70000f ipl 34
fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 
not configured
clock0 at ebus0 addr 0-1fff: mk48t59
flashprom at ebus0 addr 0-fffff not configured
audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 
722000-722003 ipl 35 ipl 36: CS4231A
audio0 at audiocs0: full duplex
hme0 at pci0 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ivec 3021
hme0: Ethernet address 08:00:20:e5:f2:5b
ukphy0 at hme0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0006b8, model 0x000c, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
esiop0 at pci0 dev 3 function 0: Symbios Logic 53c875 (ultra-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at ivec 1820
scsibus0 at esiop0: 16 targets, 8 luns per target
esiop1 at pci0 dev 3 function 1: Symbios Logic 53c875 (ultra-wide scsi)
esiop1: using on-board RAM
esiop1: interrupting at ivec 1826
scsibus1 at esiop1: 16 targets, 8 luns per target
psycho1 at mainbus0 addr 0xfffc6000
psycho1: SUNW,psycho: impl 0, version 4: ign 7c0 bus range 128 to 128; 
PCI bus 128
pci1 at psycho1
timer0 at mainbus0 addr 0xfff9fc00 irq vectors 7ec
ffb0 at mainbus0 addr 0xfebc0000: Creator3D, model SUNW,501-4788, dac 10
ffb0: attached to /dev/fb0
wsdisplay1 at ffb0
pcons at mainbus0 not configured
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <SEAGATE, SX173404LC, BD0A> disk fixed
sd0: 70007 MB, 14100 cyl, 24 head, 423 sec, 512 bytes/sect x 143374738 
sectors
sd0: async, 8-bit transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <SEAGATE, SX173404LC, BD0A> disk fixed
sd1: 70007 MB, 14100 cyl, 24 head, 423 sec, 512 bytes/sect x 143374738 
sectors
sd1: async, 8-bit transfers, tagged queueing
cd0 at scsibus0 target 6 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1007> cdrom 
removable
cd0: sync (50.00ns offset 16), 8-bit (20.000MB/s) transfers
Kernelized RAIDframe activated
root on sd0a dumps on sd0b
root file system type: ffs
Tue Jul  1 14:34:58 GMT 2008
raid0: Component /dev/sd0e being configured at col: 0
         Column: 0 Num Columns: 2
         Version: 2 Serial Number: 20080618 Mod Counter: 70
         Clean: Yes Status: 0
raid0: Component /dev/sd1e being configured at col: 1
         Column: 1 Num Columns: 2
         Version: 2 Serial Number: 20080618 Mod Counter: 70
         Clean: Yes Status: 0
WARNING: truncating disk at c 0 to 102399936 blocks
raid0: RAID Level 1
raid0: Components: /dev/sd0e /dev/sd1e
raid0: Total Sectors: 102399872 (49999 MB)
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
/dev/rsd0a: file system is clean; not checking
/dev/rsd0d: file system is clean; not checking
/dev/rsd1f: file system is clean; not checking
/dev/rsd0g: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
Starting network.
Hostname: sunny.rz1.convenimus.net
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:
Starting dhclient.
Internet Systems Consortium DHCP Client V3.0.3
Copyright 2004-2005 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP

Listening on BPF/hme0/08:00:20:e5:f2:5b
Sending on   BPF/hme0/08:00:20:e5:f2:5b
Sending on   Socket/fallback
DHCPREQUEST on hme0 to 255.255.255.255 port 67
DHCPACK from 192.168.100.10
bound to 192.168.100.5 -- renewal in 1353 seconds.
Building databases: dev, utmp, utmpx done
Starting syslogd.
Checking for core dump...
savecore: no core dump
Mounting all filesystems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Starting local daemons:.
Updating motd.
Starting sshd.
/dev/rraid0c: Parity status: clean
postfix/postfix-script: starting the Postfix mail system
Starting inetd.
Starting cron.
Tue Jul  1 16:35:10 CEST 2008

NetBSD/sparc64 (sunny) (console)