NetBSD-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: Seagate Cheetahs only async on controller



On Wed, Jun 25, 2008 at 10:24:34PM +0100, Julian Coleman wrote:
> > sd0 at scsibus0 target 0 lun 0: <SEAGATE, SX173404LC, BD0A> disk fixed
> > sd0: 70007 MB, 14100 cyl, 24 head, 423 sec, 512 bytes/sect x 143374738
> >      sectors
> > sd0: async, 8-bit transfers, tagged queueing
> 
> I have also seen this with Sun (esiop) controllers and Seagate drives with
> SX (not ST) firmware.  I've not been able to try the drives with any other
> controller.

I see it here with my SX-series seagate, which indicates this is not a
unique problem with the esiop driver.

ahc1 at pci0 dev 8 function 0: Adaptec 2940 Ultra SCSI adapter
ahc1: interrupting at irq 11
ahc1: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
[...]
scsibus0 at ahc1: 16 targets, 8 luns per target
scsibus0: waiting 2 seconds for devices to settle...
[...]
sd0 at scsibus0 target 8 lun 0: <CONNER, CFP1080E SUN1.05, 5150> disk fixed
sd0: 1030 MB, 3658 cyl, 6 head, 96 sec, 512 bytes/sect x 2110812 sectors
sd0: sync (100.00ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
[...]
sd4 at scsibus0 target 13 lun 0: <SEAGATE, SX373405LC, C206> disk fixed
sd4: 70007 MB, 29550 cyl, 8 head, 606 sec, 512 bytes/sect x 143374738 sectors
sd4: async, 8-bit transfers, tagged queueing

-- 
  Aaron J. Grier | "Not your ordinary poofy goof." | 
agrier%poofygoof.com@localhost


Home | Main Index | Thread Index | Old Index