Re: mfii0 kudos to bouyer@ Was Re: dmesg | grep -c "not configured" = 240...

[Stephen Borrill <netbsd%precedence.co.uk@localhost>]

On Mon, 26 Nov 2018, Stephen Borrill wrote:
> Thanks Manuel!
>
> [     1.048805] mfii0 at pci11 dev 0 function 0: "RAID 930-8i 2GB Flash", 
> firmware 50.3.0-1075, 2048MB cache
> [     1.048805] mfii0: interrupting at ioapic4 pin 2
> [     1.048805] scsibus0 at mfii0: 64 targets, 8 luns per target
> [     2.161214] scsibus0: waiting 2 seconds for devices to settle...
> [     2.161214] mfii0: physical disk inserted id 18 enclosure 134
> [     2.161214] mfii0: physical disk inserted id 19 enclosure 134
> [     2.161214] mfii0: physical disk inserted id 20 enclosure 134
> [     2.161214] mfii0: physical disk inserted id 21 enclosure 134
> [     4.163289] sd0 at scsibus0 target 0 lun 0: <Lenovo, RAID 930-8i-2GB, 
> 5.03> disk fixed
> [     4.163289] sd0: fabricating a geometry
> [     4.163289] sd0: 2234 GB, 2287864 cyl, 64 head, 32 sec, 512 bytes/sect x 
> 4685545472 sectors
> [     4.163289] sd0: fabricating a geometry
> [     4.163289] sd0: tagged queueing
> [     4.163289] sd1 at scsibus0 target 1 lun 0: <Lenovo, RAID 930-8i-2GB, 
> 5.03> disk fixed
> [     4.163289] sd1: fabricating a geometry
> [     4.163289] sd1: 744 GB, 761985 cyl, 64 head, 32 sec, 512 bytes/sect x 
> 1560545280 sectors
> [     4.163289] sd1: fabricating a geometry
> [     4.163289] sd1: tagged queueing
> [    32.192359] mfii0: critical limit on 'mfii0 BBU state'
> [    32.192359] mfii0: normal state on 'mfii0:0' (online)
> [    32.192359] mfii0: normal state on 'mfii0:1' (online)

The other missing driver is handled by mpii in OpenBSD (SAS3408). Our mpii 
doesn't yet support any SAS3xxxx cards.
[     1.048805] vendor 1000 product 00af (SAS mass storage, revision 0x01) 
at pci4 dev 0 function 0 not configured

--
Stephen