Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
NetBSD current [AMD64] on a T400 laptop
Installed a 30th July snapshot of Current [AMD64] on a Lenovo T400. All
went OK till I ran:
X -configure
which resulted in an immediate panic. CVSing up to todays sources and
building/loading a new kernel gave exactly the same panic. Crash dmesg
from 30th July version follows, the drm_addmap failure message may be
significant. I can put the crash dump on an ftp server if requested.
t400root(t400)crash$ crash -M netbsd.0.core -N netbsd.0
Crash version 6.99.49, image version 6.99.49.
System panicked: trap
Backtrace from time of crash is available.
crash> dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.99.49 (GENERIC.201407300840Z) #0: Wed Jul 30 09:31:48 UTC 2014
builds%b45.netbsd.org@localhost:/home/builds/ab/HEAD/amd64/201407300840Z-obj/home/source/ab/HEAD/src/sys/arch/amd64/compile/GENERIC
total memory = 2968 MB
avail memory = 2865 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 7434AZ9 (ThinkPad T400)
mainbus0 (root)
ACPI: RSDP 0xf6440 000024 (v02 LENOVO)
ACPI: XSDT 0xb9b49b3a 000094 (v01 LENOVO TP-7U 00003240 LTP 00000000)
ACPI: FACP 0xb9b49c00 0000F4 (v03 LENOVO TP-7U 00003240 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in
FADT/Pm1aControlBlock: 16/32 (20131218/tbfadt-634)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32,
using default 16 (20131218/tbfadt-716)
ACPI: DSDT 0xb9b4a00e 00FB01 (v01 LENOVO TP-7U 00003240 MSFT 03000000)
ACPI: FACS 0xb9b8e000 000040
ACPI: SSDT 0xb9b49db4 00025A (v01 LENOVO TP-7U 00003240 MSFT 03000000)
ACPI: ECDT 0xb9b59b0f 000052 (v01 LENOVO TP-7U 00003240 LNVO 00000001)
ACPI: APIC 0xb9b59b61 000078 (v01 LENOVO TP-7U 00003240 LNVO 00000001)
ACPI: MCFG 0xb9b59bd9 00003C (v01 LENOVO TP-7U 00003240 LNVO 00000001)
ACPI: HPET 0xb9b59c15 000038 (v01 LENOVO TP-7U 00003240 LNVO 00000001)
ACPI: SLIC 0xb9b59dc2 000176 (v01 LENOVO TP-7U 00003240 LTP 00000000)
ACPI: BOOT 0xb9b59f38 000028 (v01 LENOVO TP-7U 00003240 LTP 00000001)
ACPI: ASF! 0xb9b59f60 0000A0 (v16 LENOVO TP-7U 00003240 PTL 00000001)
ACPI: SSDT 0xb9b8d1fa 000568 (v01 LENOVO TP-7U 00003240 INTL 20050513)
ACPI: TCPA 0xb9907000 000032 (v00 00000000 00000000)
ACPI: SSDT 0xb98d4000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: SSDT 0xb98d3000 000274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 0xb98d2000 000242 (v01 PmRef ApTst 00003000 INTL 20050624)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Duo CPU P8600 @
2.40GHz, id 0x1067a
cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 Duo CPU P8600 @
2.40GHz, id 0x1067a
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <LENOVO,TP-7U ,00003240>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
ACPI: SSDT 0xb98d7c20 0002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 0x0 0002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 0xb98d5020 00087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 0x0 00087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 0xb98d6ca0 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: SSDT 0x0 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: SSDT 0xb98d6f20 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI: SSDT 0x0 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
TPM (INTC0102) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: LGC LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
acpiout0: brightness levels: 20 25 30 35 40 45 50 55 60 65 70 75 80 85
90 100
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DVI1, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DVI2, 0x0302): ACPI Display Output Device
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout0): Unknown Output Device, head 0
acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 127.0 C, passive cooling
acpitz1 at acpi0 (THM1): cpu0 cpu1
acpitz1: levels: critical 100.0 C, passive 95.5 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_]
(20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_]
(20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.0
pms0: Passthrough, Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2a40 (rev. 0x07)
agp0 at pchb0: G4X-family chipset
agp0: detected 32252k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a42 (rev. 0x07)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
i915drm0 at vga0: Mobile Intel GM45 Express Chipset
error: [drm:pid0:drm_addmap] *ERROR* drm_addmap couldn't ioremap
registers with base F4400000, size 400000
i915drm0: AGP at 0xd0000000 256MB
i915drm0: Initialized i915 1.6.0 20080730
vendor 0x8086 product 0x2a43 (miscellaneous display, revision 0x07) at
pci0 dev 2 function 1 not configured
vendor 0x8086 product 0x2a44 (miscellaneous communications, revision
0x07) at pci0 dev 3 function 0 not configured
puc0 at pci0 dev 3 function 3: Intel GM45 KT (com)
com2 at puc0 port 0 (16550-compatible): ioaddr 0x1830, interrupting at
ioapic0 pin 17
com2: ns16550a, working fifo
wm0 at pci0 dev 25 function 0: 82801I mobile (AMT) LAN Controller (rev.
0x03)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:22:68:0c:8b:45
makphy0 at wm0 phy 2: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 0x8086 product 0x2939 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 17
hdafg0 at hdaudio0: Conexant CX20561
hdafg0: DAC00 2ch: HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: DAC02 2ch: Speaker [Built-In]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdvsmfg at hdaudio0 not configured
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x03)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2942 (rev. 0x03)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: vendor 0x8086 product 0x4237 (rev. 0x00)
iwn0: interrupting at ioapic0 pin 17
iwn0: MIMO 1T2R, MoW, address 00:22:fa:c8:4d:a8
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 3: vendor 0x8086 product 0x2946 (rev. 0x03)
ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 4: vendor 0x8086 product 0x2948 (rev. 0x03)
ppb3: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci4 at ppb3 bus 13
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 16
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 17
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x03)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x03)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x93)
pci5 at ppb4 bus 21
pci5: i/o space, memory space enabled
cbb0 at pci5 dev 0 function 0: vendor 0x1180 product 0x0476 (rev. 0xba)
fwohci0 at pci5 dev 0 function 1: vendor 0x1180 product 0x0832 (rev. 0x04)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:01:6c:20:00:a7:e7:c2
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
cbb0: cacheline 0x10 lattimer 0x20
cbb0: bhlc 0x822010
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 22
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2917 (rev.
0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2929 (rev.
0x03)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP
0xef20ffa3<SXS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 57 us, pow 100 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2401 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2400 MHz
acpicpu0: P2: FFH, lat 10 us, pow 15000 mW, 1600 MHz
acpicpu0: P3: FFH, lat 10 us, pow 12000 mW, 800 MHz
acpicpu0: T0: FFH, lat 1 us, pow 12000 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 10500 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 9000 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 7500 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 6000 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 4500 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 3000 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 1500 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
ehci0: handing over full speed device on port 3 to uhci1
wd0 at atabus0 drive 0
wd0: <HTS721010G9SA00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568
sectors
ehci0: handing over full speed device on port 4 to uhci1
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE MU10N, , 1.05> cdrom
removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
(Ultra/33) (using DMA)
ugen0 at uhub1 port 1
ugen0: vendor 0x08ff Fingerprint Sensor, rev 2.00/17.03, addr 2
uvideo0 at uhub3 port 6 configuration 1 interface 0: Chicony Electronics
Co., Ltd. Integrated Camera, rev 2.00/3.20, addr 2
video0 at uvideo0: Chicony Electronics Co., Ltd. Integrated Camera, rev
2.00/3.20, addr 2
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ubt0 at uhub1 port 2
ubt0: Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate
II, rev 2.00/3.99, addr 3
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
acpibat0: normal capacity on 'charge state'
uvm_fault(0xfffffe8045d1a000, 0x0, 1) -> e
fatal page fault in supervisor mode
trap type 6 code 0 rip ffffffff80345834 cs 8 rflags 13246 cr2 10 ilevel
0 rsp fffffe8045e79c68
curlwp 0xfffffe80b7166340 pid 15794.1 lowest kstack 0xfffffe8045e762c0
panic: trap
cpu1: Begin traceback...
vpanic() at netbsd:vpanic+0x13c
snprintf() at netbsd:snprintf
startlwp() at netbsd:startlwp
alltraps() at netbsd:alltraps+0x9e
i915_dma_cleanup() at netbsd:i915_dma_cleanup+0x82
drm_lastclose() at netbsd:drm_lastclose+0x3a
drm_close() at netbsd:drm_close+0x1b6
cdev_close() at netbsd:cdev_close+0x86
spec_close() at netbsd:spec_close+0x12c
VOP_CLOSE() at netbsd:VOP_CLOSE+0x33
vn_close() at netbsd:vn_close+0x33
closef() at netbsd:closef+0x54
fd_close() at netbsd:fd_close+0x19f
sys_close() at netbsd:sys_close+0x20
syscall() at netbsd:syscall+0x9a
--- syscall (number 6) ---
7f7ff423c3fa:
cpu1: End traceback...
dumping to dev 0,1 (offset=2311055, size=759816):
dump
crash>
That's the bad news. The good news is that a DRMKMS kernel from today's
sources ran through X -configure fine and produced a working xorg.conf.
Buoyed up by that success I edited the xinitrc file to start kde. Well
I wouldn't say the output is perfect, there are quite a few glitches,
but it didn't die. Firefox was, however, unusable...
dmesg below:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.99.49 (DRMKMS) #1: Tue Aug 5 14:02:40 BST 2014
root%t400.anduin.org.uk@localhost:/usr/obj/sys/arch/amd64/compile/DRMKMS
total memory = 2968 MB
avail memory = 2863 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 7434AZ9 (ThinkPad T400)
mainbus0 (root)
ACPI: RSDP 0xf6440 000024 (v02 LENOVO)
ACPI: XSDT 0xb9b49b3a 000094 (v01 LENOVO TP-7U 00003240 LTP 00000000)
ACPI: FACP 0xb9b49c00 0000F4 (v03 LENOVO TP-7U 00003240 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in
FADT/Pm1aControlBlock: 16/32 (20131218/tbfadt-634)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32,
using default 16 (20131218/tbfadt-716)
ACPI: DSDT 0xb9b4a00e 00FB01 (v01 LENOVO TP-7U 00003240 MSFT 03000000)
ACPI: FACS 0xb9b8e000 000040
ACPI: SSDT 0xb9b49db4 00025A (v01 LENOVO TP-7U 00003240 MSFT 03000000)
ACPI: ECDT 0xb9b59b0f 000052 (v01 LENOVO TP-7U 00003240 LNVO 00000001)
ACPI: APIC 0xb9b59b61 000078 (v01 LENOVO TP-7U 00003240 LNVO 00000001)
ACPI: MCFG 0xb9b59bd9 00003C (v01 LENOVO TP-7U 00003240 LNVO 00000001)
ACPI: HPET 0xb9b59c15 000038 (v01 LENOVO TP-7U 00003240 LNVO 00000001)
ACPI: SLIC 0xb9b59dc2 000176 (v01 LENOVO TP-7U 00003240 LTP 00000000)
ACPI: BOOT 0xb9b59f38 000028 (v01 LENOVO TP-7U 00003240 LTP 00000001)
ACPI: ASF! 0xb9b59f60 0000A0 (v16 LENOVO TP-7U 00003240 PTL 00000001)
ACPI: SSDT 0xb9b8d1fa 000568 (v01 LENOVO TP-7U 00003240 INTL 20050513)
ACPI: TCPA 0xb9907000 000032 (v00 00000000 00000000)
ACPI: SSDT 0xb98d4000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: SSDT 0xb98d3000 000274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 0xb98d2000 000242 (v01 PmRef ApTst 00003000 INTL 20050624)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Duo CPU P8600 @
2.40GHz, id 0x1067a
cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 Duo CPU P8600 @
2.40GHz, id 0x1067a
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <LENOVO,TP-7U ,00003240>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
ACPI: SSDT 0xb98d7c20 0002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 0x0 0002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 0xb98d5020 00087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 0x0 00087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 0xb98d6ca0 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: SSDT 0x0 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: SSDT 0xb98d6f20 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI: SSDT 0x0 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) WARNING: module error: vfs load failed for `acpiverbose',
error 45
at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
SIO (PNP0C02) WARNING: module error: vfs load failed for `acpiverbose',
error 45
at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
TPM (INTC0102) WARNING: module error: vfs load failed for `acpiverbose',
error 45
at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: LGC LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
acpiout0: brightness levels: 20 25 30 35 40 45 50 55 60 65 70 75 80 85
90 100
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DVI1, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DVI2, 0x0302): ACPI Display Output Device
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout0): Unknown Output Device, head 0
acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 127.0 C, passive cooling
acpitz1 at acpi0 (THM1): cpu0 cpu1
acpitz1: levels: critical 100.0 C, passive 95.5 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_]
(20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_]
(20131218/hwxface-646)
WARNING: module error: vfs load failed for `acpiverbose', error 45
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.0
pms0: Passthrough, Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82GM45 Host Bridge (rev. 0x07)
agp0 at pchb0: G4X-family chipset
agp0: detected 32252k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: Intel 82GM45 Integrated Graphics
Device (rev. 0x07)
drm: Memory usable by graphics device = 512M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
drm: failed to find VBIOS tables
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
i915drmkms0: unable to map VGA registers: 35
intelfb0: framebuffer at 0xffff800034e5a000, size 1280x800, depth 32,
stride 5120
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation),
using wskbd0
wsmux1: connecting to wsdisplay0
Intel 82GM45 Integrated Graphics Device (miscellaneous display, revision
0x07) at pci0 dev 2 function 1 not configured
Intel product 0x2a44 (miscellaneous communications, revision 0x07) at
pci0 dev 3 function 0 not configured
puc0 at pci0 dev 3 function 3: Intel GM45 KT (com)
com2 at puc0 port 0 (16550-compatible): ioaddr 0x1830, interrupting at
ioapic0 pin 17
com2: ns16550a, working fifo
wm0 at pci0 dev 25 function 0: 82801I mobile (AMT) LAN Controller (rev.
0x03)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:22:68:0c:8b:45
makphy0 at wm0 phy 2: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: Intel 82801I USB UHCI Controller (rev.
0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: Intel 82801I USB UHCI Controller (rev.
0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: Intel 82801I USB UHCI Controller (rev.
0x03)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: Intel 82801I USB EHCI Controller (rev.
0x03)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 17
hdafg0 at hdaudio0: Conexant CX20561
hdafg0: DAC00 2ch: HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: DAC02 2ch: Speaker [Built-In]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdvsmfg at hdaudio0 not configured
ppb0 at pci0 dev 28 function 0: Intel 82801I PCI Express Port #1 (rev. 0x03)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: Intel 82801I PCI Express Port #2 (rev. 0x03)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: Intel WiFi Link 5100 (rev. 0x00)
iwn0: interrupting at ioapic0 pin 17
iwn0: MIMO 1T2R, MoW, address 00:22:fa:c8:4d:a8
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 3: Intel 82801I PCI Express Port #4 (rev. 0x03)
ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 4: Intel 82801I PCI Express Port #5 (rev. 0x03)
ppb3: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci4 at ppb3 bus 13
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: Intel 82801I USB UHCI Controller (rev.
0x03)
uhci3: interrupting at ioapic0 pin 16
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: Intel 82801I USB UHCI Controller (rev.
0x03)
uhci4: interrupting at ioapic0 pin 17
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: Intel 82801I USB UHCI Controller (rev.
0x03)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: Intel 82801I USB EHCI Controller (rev.
0x03)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb4 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x93)
pci5 at ppb4 bus 21
pci5: i/o space, memory space enabled
cbb0 at pci5 dev 0 function 0: Ricoh 5C476 PCI-CardBus Bridge (rev. 0xba)
fwohci0 at pci5 dev 0 function 1: Ricoh 5C832
PCI-SD/MMC/MMC+/MS/xD/Firewire (rev. 0x04)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:01:6c:20:00:a7:e7:c2
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
cbb0: cacheline 0x10 lattimer 0x20
cbb0: bhlc 0x822010
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 22
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: Intel 82801IEM LPC Interface Bridge
(rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: Intel 82801I Mobile AHCI SATA
Controller with 4 ports (rev. 0x03)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP
0xef20ffa3<SXS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ichsmb0 at pci0 dev 31 function 3: Intel 82801I SMBus Controller (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 57 us, pow 100 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2401 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2400 MHz
acpicpu0: P2: FFH, lat 10 us, pow 15000 mW, 1600 MHz
acpicpu0: P3: FFH, lat 10 us, pow 12000 mW, 800 MHz
acpicpu0: T0: FFH, lat 1 us, pow 12000 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 10500 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 9000 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 7500 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 6000 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 4500 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 3000 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 1500 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 0: device present, speed: 1.5Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
ehci0: handing over full speed device on port 3 to uhci1
wd0 at atabus0 drive 0
wd0: <HTS721010G9SA00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568
sectors
ehci0: handing over full speed device on port 4 to uhci1
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE MU10N, , 1.05> cdrom
removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
(Ultra/33) (using DMA)
ugen0 at uhub1 port 1
ugen0: AuthenTec Fingerprint Sensor, rev 2.00/17.03, addr 2
uvideo0 at uhub3 port 6 configuration 1 interface 0: Chicony Electronics
Co., Ltd. Integrated Camera, rev 2.00/3.20, addr 2
video0 at uvideo0: Chicony Electronics Co., Ltd. Integrated Camera, rev
2.00/3.20, addr 2
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
dump_misc_init: max_paddr = 0xb9c00000
mountroot: trying smbfs...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying msdos...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
ubt0 at uhub1 port 2
ubt0: Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate
II, rev 2.00/3.99, addr 3
wm0: link state UP (was UNKNOWN)
wm0: link state DOWN (was UP)
wm0: link state UP (was DOWN)
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
acpibat0: normal capacity on 'charge state'
--
============================================
Phone: 07805784357
Open Source O/S: www.netbsd.org
Caving: http://www.wirralcavinggroup.org.uk
============================================
Home |
Main Index |
Thread Index |
Old Index