Re: Issues with i915drmkms on AMD64

To: Taylor R Campbell <riastradh%netbsd.org@localhost>, current-users%netbsd.org@localhost
Subject: Re: Issues with i915drmkms on AMD64
From: NONAKA Kimihiro <nonakap%gmail.com@localhost>
Date: Wed, 30 Jul 2014 02:09:03 +0900
Hi,

Updated my DRMKMS patch.
Now works with My ThinkPad X61.
Please try it.

- patch
http://ftp.netbsd.org/pub/NetBSD/misc/nonaka/drmkms/20140729-nbsd-drmkms-i915drmkms.diff

- DRMKMS kernel
http://ftp.netbsd.org/pub/NetBSD/misc/nonaka/drmkms/DRMKMS-6.99.49-amd64.xz

----- ThinkPad X61 with DRMKMS kernel dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.49 (DRMKMS) #69: Wed Jul 30 01:32:49 JST 2014
    nonaka@koharu.myhome.local:/usr/obj.amd64/sys/arch/amd64/compile/DRMKMS
total memory = 4022 MB
avail memory = 3886 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 7675A73 (ThinkPad X61)
mainbus0 (root)
ACPI: RSDP 0xf6950 000024 (v02 LENOVO)
ACPI: XSDT 0xbf6bd335 000094 (v01 LENOVO TP-7N    00002210  LTP 00000000)
ACPI: FACP 0xbf6bd400 0000F4 (v03 LENOVO TP-7N    00002210 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block:
64/32 (20131218/tbfadt-634)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block:
0/32 (20131218/tbfadt-634)
ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero
address or length: 0x000000000000102C/0x0 (20131218/tbfadt-664)
ACPI: DSDT 0xbf6bd7db 00E35D (v01 LENOVO TP-7N    00002210 MSFT 03000000)
ACPI: FACS 0xbf6e4000 000040
ACPI: SSDT 0xbf6bd5b4 000227 (v01 LENOVO TP-7N    00002210 MSFT 03000000)
ACPI: ECDT 0xbf6cbb38 000052 (v01 LENOVO TP-7N    00002210 LNVO 00000001)
ACPI: TCPA 0xbf6cbb8a 000032 (v02 LENOVO TP-7N    00002210 LNVO 00000001)
ACPI: APIC 0xbf6cbbbc 000068 (v01 LENOVO TP-7N    00002210 LNVO 00000001)
ACPI: MCFG 0xbf6cbc24 00003C (v01 LENOVO TP-7N    00002210 LNVO 00000001)
ACPI: HPET 0xbf6cbc60 000038 (v01 LENOVO TP-7N    00002210 LNVO 00000001)
ACPI: SLIC 0xbf6cbdf0 000176 (v01 LENOVO TP-7N    00002210  LTP 00000000)
ACPI: BOOT 0xbf6cbf66 000028 (v01 LENOVO TP-7N    00002210  LTP 00000001)
ACPI: ASF! 0xbf6cbf8e 000072 (v16 LENOVO TP-7N    00002210 PTL  00000001)
ACPI: SSDT 0xbf6e271b 00025F (v01 LENOVO TP-7N    00002210 INTL 20050513)
ACPI: SSDT 0xbf6e297a 0000A6 (v01 LENOVO TP-7N    00002210 INTL 20050513)
ACPI: SSDT 0xbf6e2a20 0004F7 (v01 LENOVO TP-7N    00002210 INTL 20050513)
ACPI: SSDT 0xbf6e2f17 0001D8 (v01 LENOVO TP-7N    00002210 INTL 20050513)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Duo CPU     T8300  @
2.40GHz, id 0x10676
cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 Duo CPU     T8300  @
2.40GHz, id 0x10676
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <LENOVO,TP-7N   ,00002210>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
ACPI: SSDT 0xbf6e1b32 000306 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT 0x0 000306 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT 0xbf6e1ebd 00085E (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
ACPI: SSDT 0x0 00085E (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
ACPI: SSDT 0xbf6e1a6a 0000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT 0x0 0000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT 0xbf6e1e38 000085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
ACPI: SSDT 0x0 000085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) WARNING: module error: vfs load failed for `acpiverbose', error 45
at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
SIO (PNP0C02) WARNING: module error: vfs load failed for `acpiverbose', error 45
at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM3780) (aux port): irq 12
DURT (PNP0501) WARNING: module error: vfs load failed for
`acpiverbose', error 45
at acpi0 not configured
DLPT (PNP0400) WARNING: module error: vfs load failed for
`acpiverbose', error 45
at acpi0 not configured
TPM (ATM1200) WARNING: module error: vfs load failed for `acpiverbose', error 45
at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: SANYO LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
acpiout0: brightness levels: 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 100
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout1): Ext. Monitor, head 0
acpivga0:   0x0300 (acpiout2): Unknown Output Device, head 0
acpivga0:   0x0400 (acpiout0): Unknown Output Device, head 0
GDCK (IBM0079) WARNING: module error: vfs load failed for
`acpiverbose', error 45
at acpi0 not configured
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 127.0 C, passive cooling
acpitz1 at acpi0 (THM1): cpu0 cpu1
acpitz1: levels: critical 99.0 C, passive 94.5 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_]
(20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_]
(20131218/hwxface-646)
WARNING: module error: vfs load failed for `acpiverbose', error 45
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82965PM Host Bridge (rev. 0x0c)
agp0 at pchb0: i965-family chipset
agp0: detected 7676k stolen memory
agp0: aperture at 0xe0000000, size 0x20000000
i915drmkms0 at pci0 dev 2 function 0: Intel 82965PM Integrated
Graphics Device (rev. 0x0c)
drm: Memory usable by graphics device = 512M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: initialized overlay support
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
i915drmkms0: unable to map VGA registers: 35
intelfb0: framebuffer at 0xffff8000476f0000, size 1024x768, depth 32,
stride 4096
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation),
using wskbd0
wsmux1: connecting to wsdisplay0
Intel 82965PM Integrated Graphics Device (miscellaneous display,
revision 0x0c) at pci0 dev 2 function 1 not configured
wm0 at pci0 dev 25 function 0: Intel i82801H (M_AMT) LAN Controller (rev. 0x03)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address XX:XX:XX:XX:XX:XX
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: Intel 82801H USB EHCI Controller (rev. 0x03)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 17
hdafg0 at hdaudio0: ADI AD1984
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack] [Built-In]
hdafg0: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz
88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdvsmfg at hdaudio0 not configured
ppb0 at pci0 dev 28 function 0: Intel 82801H PCI Express Port #1 (rev. 0x03)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: Intel 82801H PCI Express Port #2 (rev. 0x03)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: Intel Wireless WiFi Link 4965 (rev. 0x61)
iwn0: interrupting at ioapic0 pin 17
iwn0: MIMO 2T3R, JPN, address XX:XX:XX:XX:XX:XX
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
uhci2 at pci0 dev 29 function 0: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci2: interrupting at ioapic0 pin 16
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci3: interrupting at ioapic0 pin 17
usb4 at uhci3: USB revision 1.0
ehci1 at pci0 dev 29 function 7: Intel 82801H USB EHCI Controller (rev. 0x03)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3
usb5 at ehci1: USB revision 2.0
ppb2 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xf3)
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled
cbb0 at pci3 dev 0 function 0: Ricoh 5C476 PCI-CardBus Bridge (rev. 0xba)
fwohci0 at pci3 dev 0 function 1: Ricoh 5C832
PCI-SD/MMC/MMC+/MS/xD/Firewire (rev. 0x04)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:1d:72:ff:90:21:a2:ff
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
sdhc0 at pci3 dev 0 function 2: Ricoh 5C822 PCI-CardBus
Bridge/MS/SD/MMC/SC (rev. 0x21)
sdhc0: interrupting at ioapic0 pin 18
sdhc0: SD Host Specification 1.0, rev.4
sdhc0: using DMA transfer
sdmmc0 at sdhc0 slot 0
cbb0: cacheline 0x8 lattimer 0x20
cbb0: bhlc 0x822008
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 6
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: Intel 82801HEM LPC Interface
Bridge (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 82801HBM IDE Controller
(ICH8M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: Intel 82801HBM SATA Controller (rev. 0x03)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 3 ports, 32 slots, CAP
0xe710ff82<CCCS,PSC,SSC,PMD,ISS=0x1=Gen1,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
atabus1 at ahcisata0 channel 0
atabus2 at ahcisata0 channel 2
ichsmb0 at pci0 dev 31 function 3: Intel 82801H SMBus Controller (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x32031114 rev 0x9
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat   1 us, pow   500 mW
acpicpu0: C3: FFH, lat 162 us, pow   100 mW, bus master check
acpicpu0: P0: FFH, lat  10 us, pow 35000 mW, 2401 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 35000 mW, 2400 MHz
acpicpu0: P2: FFH, lat  10 us, pow 28000 mW, 2000 MHz
acpicpu0: P3: FFH, lat  10 us, pow 22000 mW, 1600 MHz
acpicpu0: P4: FFH, lat  10 us, pow 16000 mW, 1200 MHz
acpicpu0: P5: FFH, lat  10 us, pow 14000 mW,  800 MHz
acpicpu0: T0: FFH, lat   1 us, pow 14000 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow 12250 mW,  88 %
acpicpu0: T2: FFH, lat   1 us, pow 10500 mW,  75 %
acpicpu0: T3: FFH, lat   1 us, pow  8750 mW,  63 %
acpicpu0: T4: FFH, lat   1 us, pow  7000 mW,  50 %
acpicpu0: T5: FFH, lat   1 us, pow  5250 mW,  38 %
acpicpu0: T6: FFH, lat   1 us, pow  3500 mW,  25 %
acpicpu0: T7: FFH, lat   1 us, pow  1750 mW,  13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
hdafg0: unsol: tag=0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
DRM error in i965_irq_handler: pipe A underrun
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter offline.
uhub0 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
uhub2 at usb4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
atapibus0 at atabus0: 2 targets
uhub4 at usb3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-852, HC43  403347, RB02>
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ahcisata0 port 0: device present, speed: 1.5Gb/s
ehci0: handing over full speed device on port 2 to uhci0
wd0 at atabus1 drive 0
wd0: <Hitachi HTS545025B9A300>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
(Ultra/133) (using DMA)
umass0 at uhub5 port 2 configuration 1 interface 0
umass0: Sony Storage Media, rev 2.10/a.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Sony, Storage Media, 1.00> disk removable
sd0: fabricating a geometry
sd0: 7520 MB, 7520 cyl, 64 head, 32 sec, 512 bytes/sect x 15400960 sectors
sd0: fabricating a geometry
uhub6 at uhub1 port 4: Lenovo product 0x1000, class 9/0, rev 2.00/0.01, addr 2
uhub6: multiple transaction translators
uhub6: 4 ports with 4 removable, self powered
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
ugen0 at uhub0 port 2
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
boot device: sd0
root on sd0a dumps on sd0b
dump_misc_init: max_paddr = 0x13c000000
mountroot: trying smbfs...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying msdos...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
-----

Regards,
-- 
NONAKA Kimihiro
Follow-Ups:
- Re: Issues with i915drmkms on AMD64
  - From: Jim Bernard
References:
- Re: Issues with i915drmkms on AMD64
  - From: David Mackay
- Re: Issues with i915drmkms on AMD64
  - From: NONAKA Kimihiro
- Re: Issues with i915drmkms on AMD64
  - From: NONAKA Kimihiro
- Re: Issues with i915drmkms on AMD64
  - From: gary
- Re: Issues with i915drmkms on AMD64
  - From: NONAKA Kimihiro
Prev by Date: pcc build error that has been outstanding for a few days...
Next by Date: Re: lsi 1020/1030 problems
Previous by Thread: Re: Issues with i915drmkms on AMD64
Next by Thread: Re: Issues with i915drmkms on AMD64
Indexes:
Home | Main Index | Thread Index | Old Index