Re: pkg_add packages for evbearmv6hf-el: "Cannot execute ELF binary"

["William D. Jones" <thor0505%comcast.net@localhost>]

> I don't think it is, it was just a typo, and it's fixed.
Understood. Just was the result that came up when using Google.

> Can you send me your wget binary (off-list), please? And dmesg too?
Done, sent in separate email that was not CC'ed. dmesg is printed here for 
convenience:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
   2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
   The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
   The Regents of the University of California.  All rights reserved.

NetBSD 6.99.47 (RPI) #1: Wed Jul 16 02:22:14 EDT 2014
   
william@xubuntu-ltrain:/mnt/lfs/NetBSD-CVS/objdir/evbearmv6hf-el-rpi/sys/arch/evbarm/compile/RPI
total memory = 192 MB
avail memory = 183 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
sysctl_createv: sysctl_locate(multicast) returned 2
sysctl_createv: sysctl_locate(multicast_kludge) returned 2
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: 700 MHz ARM1176JZ-S r0p7 (ARM11J V6ZK core)
cpu0: DC enabled IC enabled WB enabled LABT
cpu0: isar: [0]=0x140011 [1]=0x12002111 [2]=0x11231121 [3]=0x1102131, 
[4]=0x1141, [5]=0
cpu0: mmfr: [0]=0x1130003 [1]=0x10030302 [2]=0x1222100 [3]=0
cpu0: pfr: [0]=0x111 [1]=0x11
cpu0: 16KB/32B 4-way L1 VIPT Instruction cache
cpu0: 16KB/32B 4-way write-back-locking-C L1 VIPT Data cache
vfp0 at cpu0: VFP11, rounding, exceptions, NaN propagation, denormals
vfp0: mvfr: [0]=0x11111111 [1]=0x11111111
obio0 at mainbus0
bcmicu0 at obio0
bcmmbox0 at obio0: VC mailbox
vcmbox0 at bcmmbox0
bcmtmr0 at obio0 intr 3: VC System Timer
vchiq0 at obio0 intr 66: BCM2835 VCHIQ
bcmpm0 at obio0: Power management, Reset and Watchdog controller
bcmrng0 at obio0: RNG
plcom0 at obio0 intr 57
plcom0: txfifo disabled
plcom0: console
genfb0 at obio0
genfb0: framebuffer at 0xc006000, size 1280x720, depth 32, stride 5120
wsdisplay0 at genfb0 kbdmux 1
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 0-3 added (default, vt100 emulation)
sdhc0 at obio0 intr 62: SDHC controller
sdhc0: interrupting on intr 62
sdhc0: SD Host Specification 3.0, rev.153
sdmmc0 at sdhc0 slot 0
dwctwo0 at obio0 intr 9: USB controller
bcmspi0 at obio0 intr 54: SPI
spi0 at bcmspi0: SPI bus
bsciic0 at obio0 intr 53: BSC0
iic0 at bsciic0: I2C bus
bsciic1 at obio0 intr 53: BSC1
iic1 at bsciic1: I2C bus
bcmgpio0 at obio0: GPIO [0...31]
gpio0 at bcmgpio0: 32 pins
bcmgpio1 at obio0: GPIO [32...53]
gpio1 at bcmgpio1: 22 pins
usb0 at dwctwo0: USB revision 2.0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "bcmtmr0" frequency 1000000 Hz quality 100
WARNING: module error: vfs load failed for `usbverbose', error 45
uhub0 at usb0WARNING: module error: vfs load failed for `usbverbose', error 
45
: vendor 0x0000 DWC2 root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
ld0 at sdmmc0: <0x03:0x5344:SU08G:0x80:0x007e2c78:0x0da>
ld0: 7580 MB, 3850 cyl, 64 head, 63 sec, 512 bytes/sect x 15523840 sectors
ld0: 4-bit width, bus clock 50.000 MHz
WARNING: module error: vfs load failed for `usbverbose', error 45
WARNING: module error: vfs load failed for `usbverbose', error 45
uhub1 at uhub0 port 1WARNING: module error: vfs load failed for 
`usbverbose', error 45
WARNING: module error: vfs load failed for `usbverbose', error 45
: vendor 0x050d product 0x0234, class 9/0, rev 2.00/0.00, addr 2
uhub1: multiple transaction translators
uhub1: 4 ports with 4 removable, self powered
WARNING: module error: vfs load failed for `usbverbose', error 45
WARNING: module error: vfs load failed for `usbverbose', error 45
uhub2 at uhub1 port 1WARNING: module error: vfs load failed for 
`usbverbose', error 45
WARNING: module error: vfs load failed for `usbverbose', error 45
: vendor 0x0409 product 0x0059, class 9/0, rev 2.00/1.00, addr 3
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
umidi_search_quirk: v=1435, p=880, i=0
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: Iomega Iomega, rev 2.00/1.0f, addr 4
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Iomega E, xternal HD, 0000> disk fixed
umass0: dCSWDataResidue=6 req=32 act=32
sd0: 931 GB, 500 cyl, 8 head, 32 sec, 512 bytes/sect x 1953525168 sectors
dwctwo0: dwc2_update_urb_state(): trimming xfer length
umidi_search_quirk: v=1604, p=0, i=0
umass1 at uhub2 port 3 configuration 1 interface 0
umass1: TEACV0.0 TEACV0.0, rev 1.10/2.00, addr 5
umass1: using UFI over CBI with CCI
atapibus0 at umass1: 2 targets
probe(umass1:0:0): generic HBA error
dwctwo0: dwc2_update_urb_state(): trimming xfer length
urtwn0 at uhub1 port 4
urtwn0: Realtek 802.11n WLAN Adapter, rev 2.00/2.00, addr 6
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address 00:13:ef:d0:23:62
urtwn0: 1 rx pipe, 2 tx pipes
urtwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
urtwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 
24Mbps 36Mbps 48Mbps 54Mbps
atapibus0: detached
umass1: detached
umass1: at uhub2 port 3 (addr 5) disconnected
WARNING: module error: vfs load failed for `usbverbose', error 45
WARNING: module error: vfs load failed for `usbverbose', error 45
boot device: ld0
root on ld0a dumps on ld0b
mountroot: trying nfs...
mountroot: trying msdos...
mountroot: trying ext2fs...
mountroot: trying ffs...
/: replaying log to memory
root file system type: ffs
vchiq: local ver 6 (min 3), remote ver 6.
vcaudio0 at vchiq0: AUDS
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
audio0 at vcaudio0: half duplex, playback, capture, independent
init: copying out path `/sbin/init' 11
/: replaying log to disk
WARNING: module error: vfs load failed for `com', error 2
WARNING: module error: vfs load failed for `com', error 2
wsdisplay0: screen 4 added (default, vt100 emulation)
urtwn0: link state UP (was UNKNOWN)

> You mean that this image works?
Yea, I did a terrible job explaining :P. I have not tried the image. What I 
mean is that the PKG_PATH described in the readme 
(ftp://ftp.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/earmhf/2014-07-05/) 
links to packages which run successfully on my Pi with a current kernel 
from: ftp://nyftp.netbsd.org/pub/NetBSD-daily/HEAD/201407130250Z/