Re: Another persistent adm64 panic

To: Masao Uebayashi <uebayasi%gmail.com@localhost>
Subject: Re: Another persistent adm64 panic
From: Chavdar Ivanov <ci4ic4%gmail.com@localhost>
Date: Tue, 22 Apr 2014 08:40:35 +0100
The panic still takes place with a kernel from this night, kern_exec.c v. 1.406.

Chavdar

On 17 April 2014 17:04, Chavdar Ivanov <ci4ic4%gmail.com@localhost> wrote:
> On 17 April 2014 16:10, Masao Uebayashi <uebayasi%gmail.com@localhost> wrote:
>> Could you revert kern_exec.c and bisect?
>
> Went back as far as 1.376 with the same result. Noticed that when I
> went down to 1.377 'make depend' forced the recompilation of a bunch
> of raidframe code, so my very uneducated guess is that this panic has
> to do with the fact that my root is on raid set.
>
> Chavdar
>
>
>>
>> Masao
>>
>> On Thu, Apr 17, 2014 at 8:16 PM, Chavdar Ivanov <ci4ic4%gmail.com@localhost> 
>> wrote:
>>> Hi,
>>>
>>> Unmodified GENERIC as of 07/04/2014 (6.99.40) works fine, dmesg follows:
>>>
>>> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
>>>     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
>>>     The NetBSD Foundation, Inc.  All rights reserved.
>>> Copyright (c) 1982, 1986, 1989, 1991, 1993
>>>     The Regents of the University of California.  All rights reserved.
>>>
>>> NetBSD 6.99.40 (GENERIC) #0: Tue Apr  8 13:10:32 BST 2014
>>> sysbuild@support6.delcam.local:/home/sysbuild/Sysbuild/amd64/obj/home/sysbuild/src/sys/arch/amd64/compile/GENERIC
>>> total memory = 3071 MB
>>> avail memory = 2965 MB
>>> timecounter: Timecounters tick every 10.000 msec
>>> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
>>> AMD Rhapsody (Rev 4)
>>> mainbus0 (root)
>>> ACPI: RSDP 0xf6fc0 000024 (v02 PTLTD )
>>> ACPI: XSDT 0xbff7b450 00003C (v01 PTLTD   XSDT   06040000  LTP 00000000)
>>> ACPI: FACP 0xbff7ee46 0000F4 (v03 AMD    HAMMER   06040000 PTEC 000F4240)
>>> ACPI: DSDT 0xbff7b48c 003946 (v01 AMD-K8  AMDACPI 06040000 MSFT 0100000E)
>>> ACPI: FACS 0xbff7ffc0 000040
>>> ACPI: APIC 0xbff7ef3a 000076 (v01 PTLTD   APIC   06040000  LTP 00000000)
>>> ACPI: SPCR 0xbff7efb0 000050 (v01 PTLTD  $UCRTBL$ 06040000 PTL  00000001)
>>> ACPI: All ACPI Tables successfully acquired
>>> cpu0 at mainbus0 apid 0: AMD Opteron(tm) Processor 246, id 0xf5a
>>> cpu0: erratum 86 present
>>> cpu0: erratum 104 present
>>> cpu0: erratum 101 present
>>> cpu0: WARNING: errata present, BIOS upgrade may be
>>> cpu0: WARNING: necessary to ensure reliable operation
>>> cpu1 at mainbus0 apid 1: AMD Opteron(tm) Processor 246, id 0xf5a
>>> ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x11, 24 pins
>>> ioapic1 at mainbus0 apid 3: pa 0xf0000000, version 0x11, 4 pins
>>> ioapic2 at mainbus0 apid 4: pa 0xf0001000, version 0x11, 4 pins
>>> acpi0 at mainbus0: Intel ACPICA 20131218
>>> acpi0: X/RSDT: OemId <PTLTD , XSDT  ,06040000>, AslId < LTP,00000000>
>>> acpi0: SCI interrupting at int 9
>>> timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
>>> acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
>>> attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
>>> pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
>>> midi0 at pcppi1: PC speaker
>>> sysbeep0 at pcppi1
>>> SYSR (PNP0C02) at acpi0 not configured
>>> pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
>>> pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
>>> FDC0 (PNP0700) at acpi0 not configured
>>> UAR1 (PNP0501) at acpi0 not configured
>>> UAR2 (PNP0501) at acpi0 not configured
>>> LPT (PNP0400) at acpi0 not configured
>>> ACPI: Enabled 1 GPEs in block 00 to 0F
>>> ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_]
>>> (20131218/hwxface-646)
>>> ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_]
>>> (20131218/hwxface-646)
>>> attimer1: attached to pcppi1
>>> pckbd0 at pckbc2 (kbd slot)
>>> pckbc2: using irq 1 for kbd slot
>>> wskbd0 at pckbd0: console keyboard
>>> pms0 at pckbc2 (aux slot)
>>> pckbc2: using irq 12 for aux slot
>>> wsmouse0 at pms0 mux 0
>>> pci0 at mainbus0 bus 0: configuration mode 1
>>> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
>>> pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x7454 (rev. 0x13)
>>> agp0 at pchb0: 2 Miscellaneous Control unit(s) found.
>>> agp0: aperture at 0xe0000000, size 0x10000000
>>> ppb0 at pci0 dev 1 function 0: vendor 0x1022 product 0x7455 (rev. 0x13)
>>> pci1 at ppb0 bus 1
>>> pci1: i/o space, memory space enabled
>>> vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x4154 (rev. 0x80)
>>> wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
>>> wsmux1: connecting to wsdisplay0
>>> radeondrm0 at vga0: ATI FireGL AT T2
>>> radeondrm0: AGP at 0xe0000000 256MB
>>> radeondrm0: Initialized radeon 1.29.0 20080613
>>> ppb1 at pci0 dev 6 function 0: vendor 0x1022 product 0x7460 (rev. 0x07)
>>> pci2 at ppb1 bus 2
>>> pci2: i/o space, memory space enabled
>>> ohci0 at pci2 dev 0 function 0: vendor 0x1022 product 0x7464 (rev. 0x0b)
>>> ohci0: interrupting at ioapic0 pin 19
>>> ohci0: OHCI version 1.0, legacy support
>>> usb0 at ohci0: USB revision 1.0
>>> ohci1 at pci2 dev 0 function 1: vendor 0x1022 product 0x7464 (rev. 0x0b)
>>> ohci1: interrupting at ioapic0 pin 19
>>> ohci1: OHCI version 1.0, legacy support
>>> usb1 at ohci1: USB revision 1.0
>>> ohci2 at pci2 dev 4 function 0: vendor 0x1033 product 0x0035 (rev. 0x41)
>>> ohci2: interrupting at ioapic0 pin 17
>>> ohci2: OHCI version 1.0
>>> usb2 at ohci2: USB revision 1.0
>>> ohci3 at pci2 dev 4 function 1: vendor 0x1033 product 0x0035 (rev. 0x41)
>>> ohci3: interrupting at ioapic0 pin 18
>>> ohci3: OHCI version 1.0
>>> usb3 at ohci3: USB revision 1.0
>>> ehci0 at pci2 dev 4 function 2: vendor 0x1033 product 0x00e0 (rev. 0x02)
>>> ehci0: interrupting at ioapic0 pin 19
>>> ehci0: EHCI version 0.95
>>> ehci0: companion controllers, 3 ports each: ohci2 ohci3
>>> usb4 at ehci0: USB revision 2.0
>>> bge0 at pci2 dev 5 function 0: Broadcom BCM5705 Gigabit Ethernet
>>> bge0: interrupting at ioapic0 pin 19
>>> bge0: HW config 00000155, 00000015, 00000000, 00000000
>>> bge0: ASIC BCM5705 A3 (0x3003), Ethernet address 00:0f:ea:5d:15:a1
>>> bge0: setting short Tx thresholds
>>> brgphy0 at bge0 phy 1: BCM5705 1000BASE-T media interface, rev. 2
>>> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
>>> 1000baseT-FDX, auto
>>> satalink0 at pci2 dev 6 function 0: Silicon Image SATALink 3114 (rev. 0x02)
>>> satalink0: 33MHz PCI bus
>>> satalink0: bus-master DMA support present
>>> satalink0: using ioapic0 pin 18 for native-PCI interrupt
>>> atabus0 at satalink0 channel 0
>>> atabus1 at satalink0 channel 1
>>> atabus2 at satalink0 channel 2
>>> atabus3 at satalink0 channel 3
>>> pcib0 at pci0 dev 7 function 0: vendor 0x1022 product 0x7468 (rev. 0x05)
>>> viaide0 at pci0 dev 7 function 1: AMD AMD8111 IDE Controller (rev. 0x03)
>>> viaide0: bus-master DMA support present
>>> viaide0: primary channel configured to compatibility mode
>>> viaide0: primary channel interrupting at ioapic0 pin 14
>>> atabus4 at viaide0 channel 0
>>> viaide0: secondary channel configured to compatibility mode
>>> viaide0: secondary channel interrupting at ioapic0 pin 15
>>> atabus5 at viaide0 channel 1
>>> amdpm0 at pci0 dev 7 function 3: vendor 0x1022 product 0x746b (rev. 0x05)
>>> timecounter: Timecounter "amdpm0" frequency 3579545 Hz quality 1000
>>> amdpm0: 24-bit timer
>>> iic at amdpm0 not configured
>>> amdpm0: random number generator enabled (apprx. 57ms)
>>> pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00)
>>> pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00)
>>> pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00)
>>> amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
>>> pchb4 at pci0 dev 25 function 0: vendor 0x1022 product 0x1100 (rev. 0x00)
>>> pchb5 at pci0 dev 25 function 1: vendor 0x1022 product 0x1101 (rev. 0x00)
>>> pchb6 at pci0 dev 25 function 2: vendor 0x1022 product 0x1102 (rev. 0x00)
>>> amdnb_misc1 at pci0 dev 25 function 3: AMD NB Misc Configuration
>>> isa0 at pcib0
>>> lpt0 at isa0 port 0x378-0x37b irq 7
>>> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
>>> com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
>>> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
>>> pci3 at mainbus0 bus 8
>>> pci3: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
>>> ppb2 at pci3 dev 3 function 0: vendor 0x1022 product 0x7450 (rev. 0x12)
>>> pci4 at ppb2 bus 9
>>> pci4: i/o space, memory space enabled
>>> rtk0 at pci4 dev 1 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
>>> rtk0: interrupting at ioapic1 pin 1
>>> rtk0: Ethernet address 00:c0:df:13:2a:be
>>> rlphy0 at rtk0 phy 7: Realtek internal PHY
>>> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>>> aapic0 at pci3 dev 3 function 1: vendor 0x1022 product 0x7451 (rev. 0x01)
>>> ppb3 at pci3 dev 4 function 0: vendor 0x1022 product 0x7450 (rev. 0x12)
>>> pci5 at ppb3 bus 14
>>> pci5: i/o space, memory space enabled
>>> pdcsata0 at pci5 dev 2 function 0: Promise PDC20375 SATA150 controller
>>> (rev. 0x02)
>>> pdcsata0: interrupting at ioapic2 pin 2
>>> pdcsata0: bus-master DMA support present
>>> atabus6 at pdcsata0 channel 0
>>> atabus7 at pdcsata0 channel 1
>>> atabus8 at pdcsata0 channel 2
>>> aapic1 at pci3 dev 4 function 1: vendor 0x1022 product 0x7451 (rev. 0x01)
>>> acpicpu0 at cpu0: ACPI CPU
>>> acpicpu0: C1: HLT, lat   0 us, pow     0 mW
>>> acpicpu1 at cpu1: ACPI CPU
>>> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
>>> satalink0: port 0: device present, speed: 1.5Gb/s
>>> satalink0: port 1: device present, speed: 1.5Gb/s
>>> satalink0: port 2: device present, speed: 1.5Gb/s
>>> satalink0: port 3: device present, speed: 1.5Gb/s
>>> wd0 at atabus0 drive 0
>>> wd0: <WDC WD360GD-00FNA0>
>>> wd0: drive supports 16-sector PIO transfers, LBA48 addressing
>>> wd0: 35304 MB, 71730 cyl, 16 head, 63 sec, 512 bytes/sect x 72303840 sectors
>>> uhub0 at usb1: vendor 0x1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>>> uhub0: 3 ports with 3 removable, self powered
>>> uhub1 at usb3: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>>> uhub1: 2 ports with 2 removable, self powered
>>> uhub2 at usb0: vendor 0x1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>>> uhub2: 3 ports with 3 removable, self powered
>>> uhub3 at usb2: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>>> uhub3: 3 ports with 3 removable, self powered
>>> uhub4 at usb4: vendor 0x1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
>>> uhub4: 5 ports with 5 removable, self powered
>>> wd0: 32-bit data port
>>> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
>>> wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using 
>>> DMA)
>>> wd1 at atabus1 drive 0
>>> wd1: <ST3120827AS>
>>> wd1: drive supports 16-sector PIO transfers, LBA48 addressing
>>> wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
>>> wd1: GPT GUID: ef1257a1-6735-11e3-b719-000fea5d15a1
>>> pdcsata0 port 1: device present, speed: 1.5Gb/s
>>> pdcsata0 port 0: device present, speed: 1.5Gb/s
>>> dk0 at wd1: ef1257d9-6735-11e3-b719-000fea5d15a1
>>> dk0: 234441581 blocks at 34, type: ffs
>>> wd1: 32-bit data port
>>> wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
>>> wd1(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using 
>>> DMA)
>>> wd2 at atabus2 drive 0
>>> wd2: <WDC WD360ADFD-00NLR4>
>>> wd2: drive supports 16-sector PIO transfers, LBA48 addressing
>>> wd2: 35304 MB, 71730 cyl, 16 head, 63 sec, 512 bytes/sect x 72303840 sectors
>>> wd2: 32-bit data port
>>> wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
>>> wd2(satalink0:2:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using 
>>> DMA)
>>> wd3 at atabus3 drive 0
>>> wd3: <WDC WD360ADFD-00NLR5>
>>> wd3: drive supports 16-sector PIO transfers, LBA48 addressing
>>> wd3: 35304 MB, 71730 cyl, 16 head, 63 sec, 512 bytes/sect x 72303840 sectors
>>> wd3: 32-bit data port
>>> wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
>>> wd3(satalink0:3:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using 
>>> DMA)
>>> wd4 at atabus6 drive 0
>>> uhidev0 at uhub0 port 2 configuration 1 interface 0
>>> uhidev0: HP HP USB Laser Mouse, rev 2.00/31.00, addr 2, iclass 3/1
>>> ums0 at uhidev0: 3 buttons, W and Z dirs
>>> wsmouse1 at ums0 mux 0
>>> pdcsata0:0:0: lost interrupt
>>> type: ata tc_bcount: 512 tc_skip: 0
>>> wd4: <ST3120827AS>
>>> wd4: drive supports 16-sector PIO transfers, LBA48 addressing
>>> wd4: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
>>> wd4: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
>>> wd4(pdcsata0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using 
>>> DMA)
>>> wd5 at atabus7 drive 0
>>> pdcsata0:1:0: lost interrupt
>>> type: ata tc_bcount: 512 tc_skip: 0
>>> wd5: <ST3120827AS>
>>> wd5: drive supports 16-sector PIO transfers, LBA48 addressing
>>> wd5: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
>>> wd5: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
>>> wd5(pdcsata0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using 
>>> DMA)
>>> Kernelized RAIDframe activated
>>> pad0: outputs: 44100Hz, 16-bit, stereo
>>> audio0 at pad0: half duplex, playback, capture
>>> raid1: RAID Level 5
>>> raid1: Components: /dev/wd0a /dev/wd2a /dev/wd3a
>>> raid1: Total Sectors: 144607360 (70609 MB)
>>> raid1: GPT GUID: 5b5a0aae-1568-11e3-8834-000fea5d15a1
>>> dk1 at raid1: 5b5a0ae5-1568-11e3-8834-000fea5d15a1
>>> dk1: 144607293 blocks at 34, type: ffs
>>> raid0: RAID Level 1
>>> raid0: Components: /dev/wd5a /dev/wd4a
>>> raid0: Total Sectors: 234441472 (114473 MB)
>>> boot device: raid0
>>> root on raid0a dumps on raid0b
>>> root file system type: ffs
>>> wsdisplay0: screen 1 added (80x25, vt100 emulation)
>>> wsdisplay0: screen 2 added (80x25, vt100 emulation)
>>> wsdisplay0: screen 3 added (80x25, vt100 emulation)
>>> wsdisplay0: screen 4 added (80x25, vt100 emulation)
>>>
>>> ----
>>> Sometimes later (I can't yet find out exactly when, I might try again
>>> bisecting) I get:
>>>
>>> ....
>>> root file system type: ffs
>>> fatal protection fauilt in supervisor mode
>>> trap type 4 code 0 rip ffffffff80511a2a cs 8 rflags 10246 cr2
>>> ffff800036c88000 ilevel 0 rsp fffffe8006d08a20
>>> curlwp 0xfffffe8006d4da00 pid 1.1 lowest kstack 0xfffffe8006d052c0
>>> kernel: protection fault trap, code=0
>>> Stopped in pid 1.1 (init) at    netbsd:check_exec+0x319:      call     
>>> *8(%rax)
>>>
>>> db{1}>  bt
>>> check_exec() at netbsd:check_exec+0x319
>>> execve_loadvm() at netbsd:execve_loadvm+0x1ca
>>> execve1() at netbsd:execve1+0x28
>>> start_init() at netbsd:start_init+0x26f
>>> db{1}>
>>>
>>> --
>>>
>>> (that is with a kernel from yesterday; same with the todays one).
>>> ----
>>>
>>> Chavdar Ivanov
>
>
>
> --
> ----



-- 
----
References:
- Another persistent adm64 panic
  - From: Chavdar Ivanov
- Re: Another persistent adm64 panic
  - From: Masao Uebayashi
- Re: Another persistent adm64 panic
  - From: Chavdar Ivanov
Prev by Date: daily CVS update output
Next by Date: Xorg server version in base xsrc?
Previous by Thread: Re: Another persistent adm64 panic
Next by Thread: non-executable script after netbsd-6 to -current update causes tool build failure.
Indexes:
Home | Main Index | Thread Index | Old Index