Another persistent adm64 panic

[Chavdar Ivanov <ci4ic4%gmail.com@localhost>]

Hi,

Unmodified GENERIC as of 07/04/2014 (6.99.40) works fine, dmesg follows:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.40 (GENERIC) #0: Tue Apr  8 13:10:32 BST 2014
sysbuild@support6.delcam.local:/home/sysbuild/Sysbuild/amd64/obj/home/sysbuild/src/sys/arch/amd64/compile/GENERIC
total memory = 3071 MB
avail memory = 2965 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
AMD Rhapsody (Rev 4)
mainbus0 (root)
ACPI: RSDP 0xf6fc0 000024 (v02 PTLTD )
ACPI: XSDT 0xbff7b450 00003C (v01 PTLTD   XSDT   06040000  LTP 00000000)
ACPI: FACP 0xbff7ee46 0000F4 (v03 AMD    HAMMER   06040000 PTEC 000F4240)
ACPI: DSDT 0xbff7b48c 003946 (v01 AMD-K8  AMDACPI 06040000 MSFT 0100000E)
ACPI: FACS 0xbff7ffc0 000040
ACPI: APIC 0xbff7ef3a 000076 (v01 PTLTD   APIC   06040000  LTP 00000000)
ACPI: SPCR 0xbff7efb0 000050 (v01 PTLTD  $UCRTBL$ 06040000 PTL  00000001)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: AMD Opteron(tm) Processor 246, id 0xf5a
cpu0: erratum 86 present
cpu0: erratum 104 present
cpu0: erratum 101 present
cpu0: WARNING: errata present, BIOS upgrade may be
cpu0: WARNING: necessary to ensure reliable operation
cpu1 at mainbus0 apid 1: AMD Opteron(tm) Processor 246, id 0xf5a
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x11, 24 pins
ioapic1 at mainbus0 apid 3: pa 0xf0000000, version 0x11, 4 pins
ioapic2 at mainbus0 apid 4: pa 0xf0001000, version 0x11, 4 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <PTLTD , XSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
SYSR (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
LPT (PNP0400) at acpi0 not configured
ACPI: Enabled 1 GPEs in block 00 to 0F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_]
(20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_]
(20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x7454 (rev. 0x13)
agp0 at pchb0: 2 Miscellaneous Control unit(s) found.
agp0: aperture at 0xe0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: vendor 0x1022 product 0x7455 (rev. 0x13)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x4154 (rev. 0x80)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI FireGL AT T2
radeondrm0: AGP at 0xe0000000 256MB
radeondrm0: Initialized radeon 1.29.0 20080613
ppb1 at pci0 dev 6 function 0: vendor 0x1022 product 0x7460 (rev. 0x07)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ohci0 at pci2 dev 0 function 0: vendor 0x1022 product 0x7464 (rev. 0x0b)
ohci0: interrupting at ioapic0 pin 19
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci2 dev 0 function 1: vendor 0x1022 product 0x7464 (rev. 0x0b)
ohci1: interrupting at ioapic0 pin 19
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ohci2 at pci2 dev 4 function 0: vendor 0x1033 product 0x0035 (rev. 0x41)
ohci2: interrupting at ioapic0 pin 17
ohci2: OHCI version 1.0
usb2 at ohci2: USB revision 1.0
ohci3 at pci2 dev 4 function 1: vendor 0x1033 product 0x0035 (rev. 0x41)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0
usb3 at ohci3: USB revision 1.0
ehci0 at pci2 dev 4 function 2: vendor 0x1033 product 0x00e0 (rev. 0x02)
ehci0: interrupting at ioapic0 pin 19
ehci0: EHCI version 0.95
ehci0: companion controllers, 3 ports each: ohci2 ohci3
usb4 at ehci0: USB revision 2.0
bge0 at pci2 dev 5 function 0: Broadcom BCM5705 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 19
bge0: HW config 00000155, 00000015, 00000000, 00000000
bge0: ASIC BCM5705 A3 (0x3003), Ethernet address 00:0f:ea:5d:15:a1
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5705 1000BASE-T media interface, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
satalink0 at pci2 dev 6 function 0: Silicon Image SATALink 3114 (rev. 0x02)
satalink0: 33MHz PCI bus
satalink0: bus-master DMA support present
satalink0: using ioapic0 pin 18 for native-PCI interrupt
atabus0 at satalink0 channel 0
atabus1 at satalink0 channel 1
atabus2 at satalink0 channel 2
atabus3 at satalink0 channel 3
pcib0 at pci0 dev 7 function 0: vendor 0x1022 product 0x7468 (rev. 0x05)
viaide0 at pci0 dev 7 function 1: AMD AMD8111 IDE Controller (rev. 0x03)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14
atabus4 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15
atabus5 at viaide0 channel 1
amdpm0 at pci0 dev 7 function 3: vendor 0x1022 product 0x746b (rev. 0x05)
timecounter: Timecounter "amdpm0" frequency 3579545 Hz quality 1000
amdpm0: 24-bit timer
iic at amdpm0 not configured
amdpm0: random number generator enabled (apprx. 57ms)
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
pchb4 at pci0 dev 25 function 0: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb5 at pci0 dev 25 function 1: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb6 at pci0 dev 25 function 2: vendor 0x1022 product 0x1102 (rev. 0x00)
amdnb_misc1 at pci0 dev 25 function 3: AMD NB Misc Configuration
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pci3 at mainbus0 bus 8
pci3: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb2 at pci3 dev 3 function 0: vendor 0x1022 product 0x7450 (rev. 0x12)
pci4 at ppb2 bus 9
pci4: i/o space, memory space enabled
rtk0 at pci4 dev 1 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic1 pin 1
rtk0: Ethernet address 00:c0:df:13:2a:be
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
aapic0 at pci3 dev 3 function 1: vendor 0x1022 product 0x7451 (rev. 0x01)
ppb3 at pci3 dev 4 function 0: vendor 0x1022 product 0x7450 (rev. 0x12)
pci5 at ppb3 bus 14
pci5: i/o space, memory space enabled
pdcsata0 at pci5 dev 2 function 0: Promise PDC20375 SATA150 controller
(rev. 0x02)
pdcsata0: interrupting at ioapic2 pin 2
pdcsata0: bus-master DMA support present
atabus6 at pdcsata0 channel 0
atabus7 at pdcsata0 channel 1
atabus8 at pdcsata0 channel 2
aapic1 at pci3 dev 4 function 1: vendor 0x1022 product 0x7451 (rev. 0x01)
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
satalink0: port 0: device present, speed: 1.5Gb/s
satalink0: port 1: device present, speed: 1.5Gb/s
satalink0: port 2: device present, speed: 1.5Gb/s
satalink0: port 3: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <WDC WD360GD-00FNA0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 35304 MB, 71730 cyl, 16 head, 63 sec, 512 bytes/sect x 72303840 sectors
uhub0 at usb1: vendor 0x1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb3: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb0: vendor 0x1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
uhub3 at usb2: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
uhub4 at usb4: vendor 0x1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 5 ports with 5 removable, self powered
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0
wd1: <ST3120827AS>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd1: GPT GUID: ef1257a1-6735-11e3-b719-000fea5d15a1
pdcsata0 port 1: device present, speed: 1.5Gb/s
pdcsata0 port 0: device present, speed: 1.5Gb/s
dk0 at wd1: ef1257d9-6735-11e3-b719-000fea5d15a1
dk0: 234441581 blocks at 34, type: ffs
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus2 drive 0
wd2: <WDC WD360ADFD-00NLR4>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 35304 MB, 71730 cyl, 16 head, 63 sec, 512 bytes/sect x 72303840 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(satalink0:2:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd3 at atabus3 drive 0
wd3: <WDC WD360ADFD-00NLR5>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 35304 MB, 71730 cyl, 16 head, 63 sec, 512 bytes/sect x 72303840 sectors
wd3: 32-bit data port
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd3(satalink0:3:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd4 at atabus6 drive 0
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: HP HP USB Laser Mouse, rev 2.00/31.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
pdcsata0:0:0: lost interrupt
type: ata tc_bcount: 512 tc_skip: 0
wd4: <ST3120827AS>
wd4: drive supports 16-sector PIO transfers, LBA48 addressing
wd4: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd4: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd4(pdcsata0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd5 at atabus7 drive 0
pdcsata0:1:0: lost interrupt
type: ata tc_bcount: 512 tc_skip: 0
wd5: <ST3120827AS>
wd5: drive supports 16-sector PIO transfers, LBA48 addressing
wd5: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd5: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd5(pdcsata0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
raid1: RAID Level 5
raid1: Components: /dev/wd0a /dev/wd2a /dev/wd3a
raid1: Total Sectors: 144607360 (70609 MB)
raid1: GPT GUID: 5b5a0aae-1568-11e3-8834-000fea5d15a1
dk1 at raid1: 5b5a0ae5-1568-11e3-8834-000fea5d15a1
dk1: 144607293 blocks at 34, type: ffs
raid0: RAID Level 1
raid0: Components: /dev/wd5a /dev/wd4a
raid0: Total Sectors: 234441472 (114473 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

----
Sometimes later (I can't yet find out exactly when, I might try again
bisecting) I get:

....
root file system type: ffs
fatal protection fauilt in supervisor mode
trap type 4 code 0 rip ffffffff80511a2a cs 8 rflags 10246 cr2
ffff800036c88000 ilevel 0 rsp fffffe8006d08a20
curlwp 0xfffffe8006d4da00 pid 1.1 lowest kstack 0xfffffe8006d052c0
kernel: protection fault trap, code=0
Stopped in pid 1.1 (init) at    netbsd:check_exec+0x319:      call     *8(%rax)

db{1}>  bt
check_exec() at netbsd:check_exec+0x319
execve_loadvm() at netbsd:execve_loadvm+0x1ca
execve1() at netbsd:execve1+0x28
start_init() at netbsd:start_init+0x26f
db{1}>

-- 

(that is with a kernel from yesterday; same with the todays one).
----

Chavdar Ivanov