Re: ohci: WARNING: addr ... not found

[Thomas Klausner <tk%giga.or.at@localhost>]

On Wed, Mar 06, 2013 at 12:28:54AM +0900, Izumi Tsutsui wrote:
> My Shuttle SA76 (AMD760G + SB710) works without problem,
> so it would be device specific?
>
> ---
> NetBSD 6.0.1 (GENERIC)
> total memory = 3838 MB
> avail memory = 3711 MB
> timecounter: Timecounters tick every 10.000 msec
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> Shuttle Inc. SA76 (V10)
> mainbus0 (root)
> ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 
> 0x0000000000000000/0x1 (20110623/tbfadt-586)
> cpu0 at mainbus0 apid 0: AMD Athlon(tm) II X2 260 Processor, id 0x100f63
> cpu1 at mainbus0 apid 1: AMD Athlon(tm) II X2 260 Processor, id 0x100f63
>  :
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
>  :
> ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
> ohci0: interrupting at ioapic0 pin 16
> ohci0: OHCI version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> ohci1 at pci0 dev 18 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
> ohci1: interrupting at ioapic0 pin 16
> ohci1: OHCI version 1.0, legacy support
> usb1 at ohci1: USB revision 1.0
> ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
> ehci0: interrupting at ioapic0 pin 17
> ehci0: dropped intr workaround enabled
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 3 ports each: ohci0 ohci1
> usb2 at ehci0: USB revision 2.0
> ohci2 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
> ohci2: interrupting at ioapic0 pin 18
> ohci2: OHCI version 1.0, legacy support
> usb3 at ohci2: USB revision 1.0
> ohci3 at pci0 dev 19 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
> ohci3: interrupting at ioapic0 pin 18
> ohci3: OHCI version 1.0, legacy support
> usb4 at ohci3: USB revision 1.0
> ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
> ehci1: interrupting at ioapic0 pin 19
> ehci1: dropped intr workaround enabled
> ehci1: EHCI version 1.0
> ehci1: companion controllers, 3 ports each: ohci2 ohci3
> usb5 at ehci1: USB revision 2.0
>  :
> ohci4 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
> ohci4: interrupting at ioapic0 pin 18
> ohci4: OHCI version 1.0, legacy support
> usb6 at ohci4: USB revision 1.0
>  :
> uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 3 ports with 3 removable, self powered
> uhub2 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub2: 6 ports with 6 removable, self powered
> uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 3 ports with 3 removable, self powered
> uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub4: 3 ports with 3 removable, self powered
>  :
> uhub7: at uhub4 port 2 (addr 2) disconnected
> uhub7 at uhub4 port 2: Genesys Logic USB Hub, class 9/0, rev 1.01/0.12, addr 2
> uhub7: 4 ports with 4 removable, self powered
> umass0 at uhub7 port 2 configuration 1 interface 0
> umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 3
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, 1 lun per target
> sd0 at scsibus0 target 0 lun 0: <BUFFALO, ClipDrive, 2.00> disk removable
> sd0: fabricating a geometry
> sd0: 250 MB, 250 cyl, 64 head, 32 sec, 512 bytes/sect x 512000 sectors
> sd0: fabricating a geometry

Hm, that's weird, mine looks quite similar:

cpu0 at mainbus0 apid 0: AMD Athlon(tm) II X2 245e Processor, id 0x100f63
...
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
...
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 18 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 16
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
ohci2 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb3 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb4 at ohci3: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 19
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: companion controllers, 3 ports each: ohci2 ohci3
usb5 at ehci1: USB revision 2.0
ohci4 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
ohci4: interrupting at ioapic0 pin 18
ohci4: OHCI version 1.0, legacy support
usb6 at ohci4: USB revision 1.0

 Thomas