[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: Can't boot -curent in qemu
On 15.04.12 16:58, Paul Goyette wrote:
> I think I have a solution for this problem. Please see the attached
> With the patches applied:
> 1. A Generic kernel boots successfully, with amdtemp builtin
> 2. My custom kernel boots successfully, with no builtin amdtemp device
> There are still a couple minor oddities with this patch:
> A. When I try to 'modload amdtemp' it tries to attach two different
> # dmesg | grep 'pchb' pchb3 at pci0 dev 24 function 2: vendor 0x1022
> product 0x1202 (rev. 0x00)
> pchb4 at pci0 dev 24 function 3: vendor 0x1022 product 0x1203 (rev. 0x00)
> amdtemp0 at pchb3: AMD CPU Temperature Sensors, family 0x5 not supported
> amdtemp1 at pchb4: AMD CPU Temperature Sensors (Family10h)
That's not what I intend to archieve with replacing amdtempbus.
you should see something like this instead:
amdnb_misc0 at pci0 dev 24 function 3
amdtemp0 at amdnb_misc0
> B. envstat reports a sensor value of zero degC.
> On Sat, 14 Apr 2012, Paul Goyette wrote:
>> On Sat, 14 Apr 2012, Paul Goyette wrote:
>>> On Sat, 14 Apr 2012, Christoph Egger wrote:
>>>> Ah, there we go why it doesn't attach.
>>>> You need a kernel with these committs applied:
>>> OK, First, I am going to rebuild amdtemp module after reverting the
>>> amdtemp.ioconf file as well as the other reverts! And I'll see if
>>> this allows the amdtemp to attach on that older 1090T.
>> No luck.
>>> Then I'll check to see if that also attaches on the FX-8150.
>> Still no luck.
>> Both of these tests were with -current sources, except for
>> arch/x86/pci/pchb.c with 1.27 and 1.32 backed out
>> arch/x86/pci/pchbvar.h with 1.8 backed out
>> modules/amdtemp/amdtemp.ioconf with 1.2 1.3 and 1.4 backed out
>> I'm going to get my sources all back to -current now, before I lose
>> track of what is changed!
Main Index |
Thread Index |