here are the two dmesg outputs: Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.0.1 (GENERIC) #0: Thu Jul 30 00:08:07 UTC 2009 builds%b7.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-1-RELEASE/amd64/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/amd64/c total memory = 4022 MB avail memory = 3884 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 SMBIOS rev. 2.4 @ 0xe0010 (63 entries) LENOVO 7675K2U (ThinkPad X61) mainbus0 (root) cpu0 at mainbus0 apid 0: Intel 686-class, 2394MHz, id 0x10676 cpu0: Enhanced SpeedStep (1340 mV) 1300 MHz cpu0: Enhanced SpeedStep frequencies available (MHz): 1300 1200 1100 1000 900 800 700 600 cpu1 at mainbus0 apid 1: Intel 686-class, 2394MHz, id 0x10676 ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins acpi0 at mainbus0: Intel ACPICA 20080321 acpi0: X/RSDT: OemId <LENOVO,TP-7N ,00002070>, AslId < LTP,00000000> acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 ACPI-Safe 24-bit timer acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button attimer1 at acpi0 (TIMR, PNP0100): AT Timer attimer1: io 0x40-0x43 irq 0 hpet0 at acpi0 (HPET, PNP0103) hpet0: mem 0xfed00000-0xfed003ff timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000 pcppi1 at acpi0 (SPKR, PNP0800) pcppi1: io 0x61 midi0 at pcppi1: PC speaker (CPU-intensive output) sysbeep0 at pcppi1 pckbc1 at acpi0 (KBD, PNP0303): kbd port pckbc1: io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, IBM3780): aux port pckbc2: irq 12 TPM (ATM1200) at acpi0 not configured acpiec0 at acpi0 (EC, PNP0C09-0): ACPI Embedded Controller (disabled) acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method) acpibat0: battery info: SANYO, LION, 93P5029 577 acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter thinkpad0 at acpi0 (HKEY, IBM0068) thinkpad0: using CMOS at \UCMS thinkpad0: using EC at acpiecdt0 acpitz0 at acpi0 (THM0): critical 127.0C, passive cooling acpitz1 at acpi0 (THM1): critical 100.0C passive 35.0C, passive cooling attimer1: attached to pcppi1 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: vendor 0x8086 product 0x2a00 (rev. 0x0c) agp0 at pchb0: detected 7676k stolen memory agp0: aperture at 0xe0000000, size 0x20000000 vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a02 (rev. 0x0c) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 drm at vga0 not configured vendor 0x8086 product 0x2a03 (miscellaneous display, revision 0x0c) at pci0 dev 2 function 1 not configured wm0 at pci0 dev 25 function 0: Intel i82801H (M_AMT) LAN Controller, rev. 3 wm0: interrupting at ioapic0 pin 20 wm0: PCI-Express bus wm0: FLASH wm0: Ethernet address 00:1d:72:86:e5:aa igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0 igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x03) uhci0: interrupting at ioapic0 pin 20 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x03) uhci1: interrupting at ioapic0 pin 21 usb1 at uhci1: USB revision 1.0 ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x03) ehci0: interrupting at ioapic0 pin 22 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 usb2 at ehci0: USB revision 2.0 azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller azalia0: interrupting at ioapic0 pin 17 azalia0: host: 0x8086/0x284b (rev. 3), HDA rev. 1.0 ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x03) pci1 at ppb0 bus 2 pci1: i/o space, memory space enabled, rd/line, wr/inv ok ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2841 (rev. 0x03) pci2 at ppb1 bus 3 pci2: i/o space, memory space enabled, rd/line, wr/inv ok iwn0 at pci2 dev 0 function 0: vendor 0x8086 product 0x4230 (rev. 0x61) iwn0: interrupting at ioapic0 pin 17 iwn0: MoW1, address 00:1f:3b:03:af:9f iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x03) uhci2: interrupting at ioapic0 pin 16 usb3 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x03) uhci3: interrupting at ioapic0 pin 17 usb4 at uhci3: USB revision 1.0 ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x03) ehci1: interrupting at ioapic0 pin 19 ehci1: EHCI version 1.0 ehci1: companion controllers, 2 ports each: uhci2 uhci3 usb5 at ehci1: USB revision 2.0 ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xf3) pci3 at ppb2 bus 5 pci3: i/o space enabled cbb0 at pci3 dev 0 function 0: vendor 0x1180 product 0x0476 (rev. 0xba) cbb0: can't map socket base address 0xd7eff000 cbb0: can't map socket base address 0xffffffff80434d64: io mode fwohci0 at pci3 dev 0 function 1: vendor 0x1180 product 0x0832 (rev. 0x04) fwohci0: can't map OHCI register space vendor 0x1180 product 0x0822 (SD Host Controller system, revision 0x21) at pci3 dev 0 function 2 not configured cbb0: bad Vcc request. sock_ctrl 0xffffff88, sock_status 0xffffffff cbb0: disabling socket new status 0xffffffff cbb0: cacheline 0x0 lattimer 0x10 cbb0: bhlc 0x821000 cbb0: interrupting at ioapic0 pin 16 cardslot0 at cbb0 cardbus0 at cardslot0: bus 6 pcmcia0 at cardslot0 ichlpcib0 at pci0 dev 31 function 0 ichlpcib0: vendor 0x8086 product 0x2811 (rev. 0x03) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer ichlpcib0: TCO (watchdog) timer configured. piixide0 at pci0 dev 31 function 1 piixide0: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03) piixide0: bus-master DMA support present piixide0: primary channel configured to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel configured to compatibility mode piixide0: secondary channel ignored (disabled) ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2829 ahcisata0: interrupting at ioapic0 pin 16 ahcisata0: AHCI revision 1.1, 3 ports, 32 command slots, features 0xe710e080 atabus1 at ahcisata0 channel 0 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x283e (rev. 0x03) ichsmb0: interrupting at ioapic0 pin 23 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 azalia0: codec[0]: Analog Devices AD1984 (rev. 4.0), HDA rev. 1.0 azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0), HDA rev. 0.9 azalia0: codec[1]: No support for modem function groups azalia0: codec[1] has no audio function groups audio0 at azalia0: full duplex, independent acpiacad0: AC adapter online. uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhub5 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub5: 4 ports with 4 removable, self powered ahcisata0 port 0: device present, speed: 1.5Gb/s wd0 at atabus1 drive 0: <WDC WD3200BEVT-22ZCT0> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA) Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs ugen0 at uhub0 port 2 ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2 u3g0 at uhub4 port 1 ucom0 at u3g0 portno 0: Generic 3G Serial Device as opposed to Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.99.28 (PRPAD) #5: Sat May 1 11:55:48 AST 2010 root%prpad.dyndns.org@localhost:/usr/obj/sys/arch/amd64/compile/PRPAD total memory = 4022 MB avail memory = 3883 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 LENOVO 7675K2U (ThinkPad X61) mainbus0 (root) ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20100121/tbfadt-625) ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20100121/tbfadt-655) cpu0 at mainbus0 apid 0: Intel 686-class, 2394MHz, id 0x10676 cpu1 at mainbus0 apid 1: Intel 686-class, 2394MHz, id 0x10676 ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins acpi0 at mainbus0: Intel ACPICA 20100121 acpi0: X/RSDT: OemId <LENOVO,TP-7N ,00002070>, AslId < LTP,00000000> acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 ACPI-Safe 24-bit timer acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0 hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, IBM3780) (aux port): irq 12 TPM (ATM1200) at acpi0 not configured acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0 acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery acpibat0: SANYO LION rechargeable battery acpibat0: serial number 577, model number 93P5029 acpibat0: low->warn granularity: 0.001Wh, warn->full granularity: 0.001Wh acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter thinkpad0 at acpi0 (HKEY, IBM0068) acpitz0 at acpi0 (THM0): ACPI Thermal Zone acpitz0: critical 127.0 C, passive cooling acpitz1 at acpi0 (THM1): ACPI Thermal Zone acpitz1: critical 100.0 C, passive 95.5 C, passive cooling attimer1: attached to pcppi1 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2a00 (rev. 0x0c) agp0 at pchb0: detected 7676k stolen memory agp0: aperture at 0xe0000000, size 0x20000000 vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a02 (rev. 0x0c) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 i915drm0 at vga0: Intel i965GM i915drm0: AGP at 0xe0000000 256MB i915drm0: Initialized i915 1.6.0 20080730 vendor 0x8086 product 0x2a03 (miscellaneous display, revision 0x0c) at pci0 dev 2 function 1 not configured wm0 at pci0 dev 25 function 0: Intel i82801H (M_AMT) LAN Controller, rev. 3 wm0: interrupting at ioapic0 pin 20 wm0: PCI-Express bus wm0: FLASH wm0: Ethernet address 00:1d:72:86:e5:aa igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0 igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x03) uhci0: interrupting at ioapic0 pin 20 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x03) uhci1: interrupting at ioapic0 pin 21 usb1 at uhci1: USB revision 1.0 ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x03) ehci0: interrupting at ioapic0 pin 22 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 usb2 at ehci0: USB revision 2.0 hdaudio0 at pci0 dev 27 function 0: HD Audio Controller hdaudio0: interrupting at ioapic0 pin 17 hdafg0 at hdaudio0 vendor 0x11D4 product 0x1984 nid 0x01 (firmware configuration) hdafg0: disable assoc 2 (15) [trace failed] hdafg0: assoc 2 pin0: 1A hdafg0: DAC0:04, Analog Speaker: Fixed Function (Unknown, 12) hdafg0: DAC0:04, Analog HP Out: Jack (Green, 11) hdafg0: ADC1:08, Analog Mic In: Jack (Red, 1C) hdafg0: ADC1:08, Analog Mic In: Jack (Red, 14) hdafg0: ADC1:08, Analog Mic In: Fixed Function (Unknown, 15) hdafg0: 2ch/2ch 8000Hz-192000Hz 16/16 20/32 24/32 audio0 at hdafg0: full duplex, playback, capture, independent hdvsmfg at hdaudio0 vendor 0x14F1 product 0x2BFA nid 0x02 not configured ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x03) pci1 at ppb0 bus 2 pci1: i/o space, memory space enabled, rd/line, wr/inv ok ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2841 (rev. 0x03) pci2 at ppb1 bus 3 pci2: i/o space, memory space enabled, rd/line, wr/inv ok iwn0 at pci2 dev 0 function 0: vendor 0x8086 product 0x4230 (rev. 0x61) iwn0: interrupting at ioapic0 pin 17 iwn0: MIMO 2T3R, MoW1, address 00:1f:3b:03:af:9f iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x03) uhci2: interrupting at ioapic0 pin 16 usb3 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x03) uhci3: interrupting at ioapic0 pin 17 usb4 at uhci3: USB revision 1.0 ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x03) ehci1: interrupting at ioapic0 pin 19 ehci1: EHCI version 1.0 ehci1: companion controllers, 2 ports each: uhci2 uhci3 usb5 at ehci1: USB revision 2.0 ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xf3) pci3 at ppb2 bus 5 pci3: i/o space enabled cbb0 at pci3 dev 0 function 0: vendor 0x1180 product 0x0476 (rev. 0xba) cbb0: can't map socket base address 0xd7eff000 cbb0: can't map socket base address 0x0: io mode fwohci0 at pci3 dev 0 function 1: vendor 0x1180 product 0x0832 (rev. 0x04) fwohci0: can't map OHCI register space sdhc0 at pci3 dev 0 function 2: vendor 0x1180 product 0x0822 (rev. 0x21) sdhc0: interrupting at ioapic0 pin 18 sdhc0: couldn't map register cbb0: bad Vcc request. sock_ctrl 0xffffff88, sock_status 0xffffffff cbb0: disabling socket new status 0xffffffff cbb0: cacheline 0x0 lattimer 0x10 cbb0: bhlc 0x821000 cbb0: interrupting at ioapic0 pin 16 cardslot0 at cbb0 cardbus0 at cardslot0: bus 6 pcmcia0 at cardslot0 ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2811 (rev. 0x03) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer ichlpcib0: TCO (watchdog) timer configured. piixide0 at pci0 dev 31 function 1: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03) piixide0: bus-master DMA support present piixide0: primary channel configured to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel configured to compatibility mode piixide0: secondary channel ignored (disabled) ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2829 ahcisata0: interrupting at ioapic0 pin 16 ahcisata0: AHCI revision 1.1, 3 ports, 32 command slots, features 0xe710e080 atabus1 at ahcisata0 channel 0 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x283e (rev. 0x03) ichsmb0: interrupting at ioapic0 pin 23 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 acpiacad0: AC adapter online. uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhub5 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub5: 4 ports with 4 removable, self powered ahcisata0 port 0: device present, speed: 1.5Gb/s wd0 at atabus1 drive 0: <WDC WD3200BEVT-22ZCT0> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA) Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex, playback, capture boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs ugen0 at uhub0 port 2 ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2 u3g0 at uhub4 port 1 configuration 1 interface 0 ucom0 at u3g0 portno 0: 3G Modem wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)
Attachment:
pgpqNh5xYsT51.pgp
Description: PGP signature